diff --git a/.gitignore b/.gitignore index e39a8cd34..d4001b8d2 100644 --- a/.gitignore +++ b/.gitignore @@ -1,8 +1,3 @@ # Dummy NPL build *.o /porting/examples/dummy/dummy - -# nRF5 SDK build -/porting/examples/freertos_nrf5_sdk/nrf5_sdk -/porting/examples/freertos_nrf5_sdk/pca10040/blank/armgcc/_build/ -/porting/examples/freertos_nrf5_sdk/pca10056/blank/armgcc/_build/ diff --git a/porting/examples/freertos_nrf5_sdk/ble.c b/porting/examples/freertos_nrf5_sdk/ble.c deleted file mode 100644 index 0315cc83c..000000000 --- a/porting/examples/freertos_nrf5_sdk/ble.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Licensed to the Apache Software Foundation (ASF) under one - * or more contributor license agreements. See the NOTICE file - * distributed with this work for additional information - * regarding copyright ownership. The ASF licenses this file - * to you under the Apache License, Version 2.0 (the - * "License"); you may not use this file except in compliance - * with the License. You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, - * software distributed under the License is distributed on an - * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY - * KIND, either express or implied. See the License for the - * specific language governing permissions and limitations - * under the License. - */ - -#include -#include -#include - -#include "FreeRTOS.h" -#include "task.h" - -#include "nimble/nimble_port.h" -#include "host/ble_hs.h" -#include "host/util/util.h" -#include "services/gap/ble_svc_gap.h" -#include "services/gatt/ble_svc_gatt.h" - -static const char gap_name[] = "FreeRTOS NimBLE"; - -static uint8_t own_addr_type; - -static void start_advertise(void); - -static void -put_ad(uint8_t ad_type, uint8_t ad_len, const void *ad, uint8_t *buf, - uint8_t *len) -{ - buf[(*len)++] = ad_len + 1; - buf[(*len)++] = ad_type; - - memcpy(&buf[*len], ad, ad_len); - - *len += ad_len; -} - -static void -update_ad(void) -{ - uint8_t ad[BLE_HS_ADV_MAX_SZ]; - uint8_t ad_len = 0; - uint8_t ad_flags = BLE_HS_ADV_F_DISC_GEN | BLE_HS_ADV_F_BREDR_UNSUP; - - put_ad(BLE_HS_ADV_TYPE_FLAGS, 1, &ad_flags, ad, &ad_len); - put_ad(BLE_HS_ADV_TYPE_COMP_NAME, sizeof(gap_name), gap_name, ad, &ad_len); - - ble_gap_adv_set_data(ad, ad_len); -} - -static int -gap_event_cb(struct ble_gap_event *event, void *arg) -{ - switch (event->type) { - case BLE_GAP_EVENT_CONNECT: - if (event->connect.status) { - start_advertise(); - } - break; - - case BLE_GAP_EVENT_DISCONNECT: - start_advertise(); - break; - } - - return 0; -} - -static void -start_advertise(void) -{ - struct ble_gap_adv_params advp; - int rc; - - update_ad(); - - memset(&advp, 0, sizeof advp); - advp.conn_mode = BLE_GAP_CONN_MODE_UND; - advp.disc_mode = BLE_GAP_DISC_MODE_GEN; - rc = ble_gap_adv_start(own_addr_type, NULL, BLE_HS_FOREVER, - &advp, gap_event_cb, NULL); - assert(rc == 0); -} - -static void -app_ble_sync_cb(void) -{ - int rc; - - rc = ble_hs_util_ensure_addr(0); - assert(rc == 0); - - rc = ble_hs_id_infer_auto(0, &own_addr_type); - assert(rc == 0); - - start_advertise(); -} - -void -nimble_host_task(void *param) -{ - ble_hs_cfg.sync_cb = app_ble_sync_cb; - - /* Enable GAP and GATT services */ - ble_svc_gap_init(); - ble_svc_gatt_init(); - - ble_svc_gap_device_name_set(gap_name); - - while (1) { - ble_npl_eventq_run(ble_npl_eventq_dflt_get()); - } -} diff --git a/porting/examples/freertos_nrf5_sdk/config/FreeRTOSConfig.h b/porting/examples/freertos_nrf5_sdk/config/FreeRTOSConfig.h deleted file mode 100644 index f9db4e9bc..000000000 --- a/porting/examples/freertos_nrf5_sdk/config/FreeRTOSConfig.h +++ /dev/null @@ -1,207 +0,0 @@ -/* - * FreeRTOS Kernel V10.0.0 - * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy of - * this software and associated documentation files (the "Software"), to deal in - * the Software without restriction, including without limitation the rights to - * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of - * the Software, and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in all - * copies or substantial portions of the Software. If you wish to use our Amazon - * FreeRTOS name, please do so in a fair use way that does not cause confusion. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR - * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * http://www.FreeRTOS.org - * http://aws.amazon.com/freertos - * - * 1 tab == 4 spaces! - */ - - -#ifndef FREERTOS_CONFIG_H -#define FREERTOS_CONFIG_H - -#ifdef SOFTDEVICE_PRESENT -#include "nrf_soc.h" -#endif -#include "app_util_platform.h" - -/*----------------------------------------------------------- - * Possible configurations for system timer - */ -#define FREERTOS_USE_RTC 0 /**< Use real time clock for the system */ -#define FREERTOS_USE_SYSTICK 1 /**< Use SysTick timer for system */ - -/*----------------------------------------------------------- - * Application specific definitions. - * - * These definitions should be adjusted for your particular hardware and - * application requirements. - * - * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE - * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. - * - * See http://www.freertos.org/a00110.html. - *----------------------------------------------------------*/ - -#define configTICK_SOURCE FREERTOS_USE_RTC - -#define configUSE_PREEMPTION 1 -#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 -#define configUSE_TICKLESS_IDLE 1 -#define configUSE_TICKLESS_IDLE_SIMPLE_DEBUG 1 /* See into vPortSuppressTicksAndSleep source code for explanation */ -#define configCPU_CLOCK_HZ ( SystemCoreClock ) -#define configTICK_RATE_HZ 1024 -#define configMAX_PRIORITIES ( 3 ) -#define configMINIMAL_STACK_SIZE ( 60 ) -#define configTOTAL_HEAP_SIZE ( 8192 ) -#define configMAX_TASK_NAME_LEN ( 4 ) -#define configUSE_16_BIT_TICKS 0 -#define configIDLE_SHOULD_YIELD 1 -#define configUSE_MUTEXES 1 -#define configUSE_RECURSIVE_MUTEXES 1 -#define configUSE_COUNTING_SEMAPHORES 1 -#define configUSE_ALTERNATIVE_API 0 /* Deprecated! */ -#define configQUEUE_REGISTRY_SIZE 2 -#define configUSE_QUEUE_SETS 0 -#define configUSE_TIME_SLICING 0 -#define configUSE_NEWLIB_REENTRANT 0 -#define configENABLE_BACKWARD_COMPATIBILITY 1 - -/* Hook function related definitions. */ -#define configUSE_IDLE_HOOK 0 -#define configUSE_TICK_HOOK 0 -#define configCHECK_FOR_STACK_OVERFLOW 0 -#define configUSE_MALLOC_FAILED_HOOK 0 - -/* Run time and task stats gathering related definitions. */ -#define configGENERATE_RUN_TIME_STATS 0 -#define configUSE_TRACE_FACILITY 0 -#define configUSE_STATS_FORMATTING_FUNCTIONS 0 - -/* Co-routine definitions. */ -#define configUSE_CO_ROUTINES 0 -#define configMAX_CO_ROUTINE_PRIORITIES ( 2 ) - -/* Software timer definitions. */ -#define configUSE_TIMERS 1 -#define configTIMER_TASK_PRIORITY ( 2 ) -#define configTIMER_QUEUE_LENGTH 32 -#define configTIMER_TASK_STACK_DEPTH ( 80 ) - -/* Tickless Idle configuration. */ -#define configEXPECTED_IDLE_TIME_BEFORE_SLEEP 2 - -/* Tickless idle/low power functionality. */ - - -/* Define to trap errors during development. */ -#if defined(DEBUG_NRF) || defined(DEBUG_NRF_USER) -#define configASSERT( x ) ASSERT(x) -#endif - -/* FreeRTOS MPU specific definitions. */ -#define configINCLUDE_APPLICATION_DEFINED_PRIVILEGED_FUNCTIONS 1 - -/* Optional functions - most linkers will remove unused functions anyway. */ -#define INCLUDE_vTaskPrioritySet 1 -#define INCLUDE_uxTaskPriorityGet 1 -#define INCLUDE_vTaskDelete 1 -#define INCLUDE_vTaskSuspend 1 -#define INCLUDE_xResumeFromISR 1 -#define INCLUDE_vTaskDelayUntil 1 -#define INCLUDE_vTaskDelay 1 -#define INCLUDE_xTaskGetSchedulerState 1 -#define INCLUDE_xTaskGetCurrentTaskHandle 1 -#define INCLUDE_uxTaskGetStackHighWaterMark 1 -#define INCLUDE_xTaskGetIdleTaskHandle 1 -#define INCLUDE_xTimerGetTimerDaemonTaskHandle 1 -#define INCLUDE_pcTaskGetTaskName 1 -#define INCLUDE_eTaskGetState 1 -#define INCLUDE_xEventGroupSetBitFromISR 1 -#define INCLUDE_xTimerPendFunctionCall 1 - -/* The lowest interrupt priority that can be used in a call to a "set priority" -function. */ -#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY 0xf - -/* The highest interrupt priority that can be used by any interrupt service -routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL -INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER -PRIORITY THAN THIS! (higher priorities are lower numeric values. */ -#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY _PRIO_APP_HIGH - - -/* Interrupt priorities used by the kernel port layer itself. These are generic -to all Cortex-M ports, and do not rely on any particular library functions. */ -#define configKERNEL_INTERRUPT_PRIORITY configLIBRARY_LOWEST_INTERRUPT_PRIORITY -/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!! -See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */ -#define configMAX_SYSCALL_INTERRUPT_PRIORITY configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY - -/* Definitions that map the FreeRTOS port interrupt handlers to their CMSIS -standard names - or at least those used in the unmodified vector table. */ - -#define vPortSVCHandler SVC_Handler -#define xPortPendSVHandler PendSV_Handler - - -/*----------------------------------------------------------- - * Settings that are generated automatically - * basing on the settings above - */ -#if (configTICK_SOURCE == FREERTOS_USE_SYSTICK) - // do not define configSYSTICK_CLOCK_HZ for SysTick to be configured automatically - // to CPU clock source - #define xPortSysTickHandler SysTick_Handler -#elif (configTICK_SOURCE == FREERTOS_USE_RTC) - #define configSYSTICK_CLOCK_HZ ( 32768UL ) - #define xPortSysTickHandler RTC1_IRQHandler -#else - #error Unsupported configTICK_SOURCE value -#endif - -/* Code below should be only used by the compiler, and not the assembler. */ -#if !(defined(__ASSEMBLY__) || defined(__ASSEMBLER__)) - #include "nrf.h" - #include "nrf_assert.h" - - /* This part of definitions may be problematic in assembly - it uses definitions from files that are not assembly compatible. */ - /* Cortex-M specific definitions. */ - #ifdef __NVIC_PRIO_BITS - /* __BVIC_PRIO_BITS will be specified when CMSIS is being used. */ - #define configPRIO_BITS __NVIC_PRIO_BITS - #else - #error "This port requires __NVIC_PRIO_BITS to be defined" - #endif - - /* Access to current system core clock is required only if we are ticking the system by systimer */ - #if (configTICK_SOURCE == FREERTOS_USE_SYSTICK) - #include - extern uint32_t SystemCoreClock; - #endif -#endif /* !assembler */ - -/** Implementation note: Use this with caution and set this to 1 ONLY for debugging - * ---------------------------------------------------------- - * Set the value of configUSE_DISABLE_TICK_AUTO_CORRECTION_DEBUG to below for enabling or disabling RTOS tick auto correction: - * 0. This is default. If the RTC tick interrupt is masked for more than 1 tick by higher priority interrupts, then most likely - * one or more RTC ticks are lost. The tick interrupt inside RTOS will detect this and make a correction needed. This is needed - * for the RTOS internal timers to be more accurate. - * 1. The auto correction for RTOS tick is disabled even though few RTC tick interrupts were lost. This feature is desirable when debugging - * the RTOS application and stepping though the code. After stepping when the application is continued in debug mode, the auto-corrections of - * RTOS tick might cause asserts. Setting configUSE_DISABLE_TICK_AUTO_CORRECTION_DEBUG to 1 will make RTC and RTOS go out of sync but could be - * convenient for debugging. - */ -#define configUSE_DISABLE_TICK_AUTO_CORRECTION_DEBUG 0 - -#endif /* FREERTOS_CONFIG_H */ diff --git a/porting/examples/freertos_nrf5_sdk/include/syscfg/syscfg.h b/porting/examples/freertos_nrf5_sdk/include/syscfg/syscfg.h deleted file mode 100644 index 0a534ae20..000000000 --- a/porting/examples/freertos_nrf5_sdk/include/syscfg/syscfg.h +++ /dev/null @@ -1,1038 +0,0 @@ -/** - * This file was generated by Apache Newt version: 1.4.0-dev - */ - -#ifndef H_MYNEWT_SYSCFG_ -#define H_MYNEWT_SYSCFG_ - -/** - * This macro exists to ensure code includes this header when needed. If code - * checks the existence of a setting directly via ifdef without including this - * header, the setting macro will silently evaluate to 0. In contrast, an - * attempt to use these macros without including this header will result in a - * compiler error. - */ -#define MYNEWT_VAL(x) MYNEWT_VAL_ ## x - - - -/*** compiler/arm-none-eabi-m4 */ -#ifndef MYNEWT_VAL_HARDFLOAT -#define MYNEWT_VAL_HARDFLOAT (0) -#endif - -/*** hw/bsp/nrf52840pdk */ -#ifndef MYNEWT_VAL_BSP_NRF52840 -#define MYNEWT_VAL_BSP_NRF52840 (1) -#endif - -#ifndef MYNEWT_VAL_I2C_0_FREQ_KHZ -#define MYNEWT_VAL_I2C_0_FREQ_KHZ (100) -#endif - -#ifndef MYNEWT_VAL_I2C_0_PIN_SCL -#define MYNEWT_VAL_I2C_0_PIN_SCL (27) -#endif - -#ifndef MYNEWT_VAL_I2C_0_PIN_SDA -#define MYNEWT_VAL_I2C_0_PIN_SDA (26) -#endif - -#ifndef MYNEWT_VAL_PWM_3 -#define MYNEWT_VAL_PWM_3 (0) -#endif - -#ifndef MYNEWT_VAL_SPI_0_MASTER_PIN_MISO -#define MYNEWT_VAL_SPI_0_MASTER_PIN_MISO (47) -#endif - -#ifndef MYNEWT_VAL_SPI_0_MASTER_PIN_MOSI -#define MYNEWT_VAL_SPI_0_MASTER_PIN_MOSI (46) -#endif - -#ifndef MYNEWT_VAL_SPI_0_MASTER_PIN_SCK -#define MYNEWT_VAL_SPI_0_MASTER_PIN_SCK (45) -#endif - -#ifndef MYNEWT_VAL_SPI_0_SLAVE_PIN_MISO -#define MYNEWT_VAL_SPI_0_SLAVE_PIN_MISO (47) -#endif - -#ifndef MYNEWT_VAL_SPI_0_SLAVE_PIN_MOSI -#define MYNEWT_VAL_SPI_0_SLAVE_PIN_MOSI (46) -#endif - -#ifndef MYNEWT_VAL_SPI_0_SLAVE_PIN_SCK -#define MYNEWT_VAL_SPI_0_SLAVE_PIN_SCK (45) -#endif - -#ifndef MYNEWT_VAL_SPI_0_SLAVE_PIN_SS -#define MYNEWT_VAL_SPI_0_SLAVE_PIN_SS (44) -#endif - -#ifndef MYNEWT_VAL_TIMER_0 -#define MYNEWT_VAL_TIMER_0 (0) -#endif - -#ifndef MYNEWT_VAL_TIMER_1 -#define MYNEWT_VAL_TIMER_1 (0) -#endif - -#ifndef MYNEWT_VAL_TIMER_2 -#define MYNEWT_VAL_TIMER_2 (0) -#endif - -#ifndef MYNEWT_VAL_TIMER_3 -#define MYNEWT_VAL_TIMER_3 (0) -#endif - -#ifndef MYNEWT_VAL_TIMER_4 -#define MYNEWT_VAL_TIMER_4 (0) -#endif - -#ifndef MYNEWT_VAL_TIMER_5 -#define MYNEWT_VAL_TIMER_5 (1) -#endif - -#ifndef MYNEWT_VAL_UART_0 -#define MYNEWT_VAL_UART_0 (1) -#endif - -#ifndef MYNEWT_VAL_UART_0_PIN_CTS -#define MYNEWT_VAL_UART_0_PIN_CTS (7) -#endif - -#ifndef MYNEWT_VAL_UART_0_PIN_RTS -#define MYNEWT_VAL_UART_0_PIN_RTS (5) -#endif - -#ifndef MYNEWT_VAL_UART_0_PIN_RX -#define MYNEWT_VAL_UART_0_PIN_RX (8) -#endif - -#ifndef MYNEWT_VAL_UART_0_PIN_TX -#define MYNEWT_VAL_UART_0_PIN_TX (6) -#endif - -#ifndef MYNEWT_VAL_UART_1 -#define MYNEWT_VAL_UART_1 (0) -#endif - -#ifndef MYNEWT_VAL_UART_1_PIN_CTS -#define MYNEWT_VAL_UART_1_PIN_CTS (-1) -#endif - -#ifndef MYNEWT_VAL_UART_1_PIN_RTS -#define MYNEWT_VAL_UART_1_PIN_RTS (-1) -#endif - -#ifndef MYNEWT_VAL_UART_1_PIN_RX -#define MYNEWT_VAL_UART_1_PIN_RX (-1) -#endif - -#ifndef MYNEWT_VAL_UART_1_PIN_TX -#define MYNEWT_VAL_UART_1_PIN_TX (-1) -#endif - -/*** hw/mcu/nordic/nrf52xxx */ -#ifndef MYNEWT_VAL_ADC_0 -#define MYNEWT_VAL_ADC_0 (0) -#endif - -#ifndef MYNEWT_VAL_ADC_0_REFMV_0 -#define MYNEWT_VAL_ADC_0_REFMV_0 (0) -#endif - -#ifndef MYNEWT_VAL_I2C_0 -#define MYNEWT_VAL_I2C_0 (0) -#endif - -#ifndef MYNEWT_VAL_I2C_1 -#define MYNEWT_VAL_I2C_1 (0) -#endif - -/* Overridden by hw/bsp/nrf52840pdk (defined by hw/mcu/nordic/nrf52xxx) */ -#ifndef MYNEWT_VAL_MCU_DCDC_ENABLED -#define MYNEWT_VAL_MCU_DCDC_ENABLED (1) -#endif - -#ifndef MYNEWT_VAL_MCU_FLASH_MIN_WRITE_SIZE -#define MYNEWT_VAL_MCU_FLASH_MIN_WRITE_SIZE (1) -#endif - -#ifndef MYNEWT_VAL_PWM_0 -#define MYNEWT_VAL_PWM_0 (0) -#endif - -#ifndef MYNEWT_VAL_PWM_1 -#define MYNEWT_VAL_PWM_1 (0) -#endif - -#ifndef MYNEWT_VAL_PWM_2 -#define MYNEWT_VAL_PWM_2 (0) -#endif - -#ifndef MYNEWT_VAL_QSPI_ADDRMODE -#define MYNEWT_VAL_QSPI_ADDRMODE (0) -#endif - -#ifndef MYNEWT_VAL_QSPI_DPMCONFIG -#define MYNEWT_VAL_QSPI_DPMCONFIG (0) -#endif - -#ifndef MYNEWT_VAL_QSPI_ENABLE -#define MYNEWT_VAL_QSPI_ENABLE (0) -#endif - -/* Overridden by hw/bsp/nrf52840pdk (defined by hw/mcu/nordic/nrf52xxx) */ -#ifndef MYNEWT_VAL_QSPI_FLASH_PAGE_SIZE -#define MYNEWT_VAL_QSPI_FLASH_PAGE_SIZE (256) -#endif - -/* Overridden by hw/bsp/nrf52840pdk (defined by hw/mcu/nordic/nrf52xxx) */ -#ifndef MYNEWT_VAL_QSPI_FLASH_SECTOR_COUNT -#define MYNEWT_VAL_QSPI_FLASH_SECTOR_COUNT (4096) -#endif - -/* Overridden by hw/bsp/nrf52840pdk (defined by hw/mcu/nordic/nrf52xxx) */ -#ifndef MYNEWT_VAL_QSPI_FLASH_SECTOR_SIZE -#define MYNEWT_VAL_QSPI_FLASH_SECTOR_SIZE (4096) -#endif - -/* Overridden by hw/bsp/nrf52840pdk (defined by hw/mcu/nordic/nrf52xxx) */ -#ifndef MYNEWT_VAL_QSPI_PIN_CS -#define MYNEWT_VAL_QSPI_PIN_CS (17) -#endif - -/* Overridden by hw/bsp/nrf52840pdk (defined by hw/mcu/nordic/nrf52xxx) */ -#ifndef MYNEWT_VAL_QSPI_PIN_DIO0 -#define MYNEWT_VAL_QSPI_PIN_DIO0 (20) -#endif - -/* Overridden by hw/bsp/nrf52840pdk (defined by hw/mcu/nordic/nrf52xxx) */ -#ifndef MYNEWT_VAL_QSPI_PIN_DIO1 -#define MYNEWT_VAL_QSPI_PIN_DIO1 (21) -#endif - -/* Overridden by hw/bsp/nrf52840pdk (defined by hw/mcu/nordic/nrf52xxx) */ -#ifndef MYNEWT_VAL_QSPI_PIN_DIO2 -#define MYNEWT_VAL_QSPI_PIN_DIO2 (22) -#endif - -/* Overridden by hw/bsp/nrf52840pdk (defined by hw/mcu/nordic/nrf52xxx) */ -#ifndef MYNEWT_VAL_QSPI_PIN_DIO3 -#define MYNEWT_VAL_QSPI_PIN_DIO3 (23) -#endif - -/* Overridden by hw/bsp/nrf52840pdk (defined by hw/mcu/nordic/nrf52xxx) */ -#ifndef MYNEWT_VAL_QSPI_PIN_SCK -#define MYNEWT_VAL_QSPI_PIN_SCK (19) -#endif - -#ifndef MYNEWT_VAL_QSPI_READOC -#define MYNEWT_VAL_QSPI_READOC (0) -#endif - -#ifndef MYNEWT_VAL_QSPI_SCK_DELAY -#define MYNEWT_VAL_QSPI_SCK_DELAY (0) -#endif - -#ifndef MYNEWT_VAL_QSPI_SCK_FREQ -#define MYNEWT_VAL_QSPI_SCK_FREQ (0) -#endif - -#ifndef MYNEWT_VAL_QSPI_SPI_MODE -#define MYNEWT_VAL_QSPI_SPI_MODE (0) -#endif - -#ifndef MYNEWT_VAL_QSPI_WRITEOC -#define MYNEWT_VAL_QSPI_WRITEOC (0) -#endif - -#ifndef MYNEWT_VAL_SOFT_PWM -#define MYNEWT_VAL_SOFT_PWM (0) -#endif - -#ifndef MYNEWT_VAL_SPI_0_MASTER -#define MYNEWT_VAL_SPI_0_MASTER (0) -#endif - -#ifndef MYNEWT_VAL_SPI_0_SLAVE -#define MYNEWT_VAL_SPI_0_SLAVE (0) -#endif - -#ifndef MYNEWT_VAL_SPI_1_MASTER -#define MYNEWT_VAL_SPI_1_MASTER (0) -#endif - -#ifndef MYNEWT_VAL_SPI_1_SLAVE -#define MYNEWT_VAL_SPI_1_SLAVE (0) -#endif - -#ifndef MYNEWT_VAL_SPI_2_MASTER -#define MYNEWT_VAL_SPI_2_MASTER (0) -#endif - -#ifndef MYNEWT_VAL_SPI_2_SLAVE -#define MYNEWT_VAL_SPI_2_SLAVE (0) -#endif - -/* Overridden by hw/bsp/nrf52840pdk (defined by hw/mcu/nordic/nrf52xxx) */ -#ifndef MYNEWT_VAL_XTAL_32768 -#define MYNEWT_VAL_XTAL_32768 (1) -#endif - -#ifndef MYNEWT_VAL_XTAL_32768_SYNTH -#define MYNEWT_VAL_XTAL_32768_SYNTH (0) -#endif - -#ifndef MYNEWT_VAL_XTAL_RC -#define MYNEWT_VAL_XTAL_RC (0) -#endif - -/*** kernel/os */ -#ifndef MYNEWT_VAL_FLOAT_USER -#define MYNEWT_VAL_FLOAT_USER (0) -#endif - -#ifndef MYNEWT_VAL_MSYS_1_BLOCK_COUNT -#define MYNEWT_VAL_MSYS_1_BLOCK_COUNT (12) -#endif - -#ifndef MYNEWT_VAL_MSYS_1_BLOCK_SIZE -#define MYNEWT_VAL_MSYS_1_BLOCK_SIZE (292) -#endif - -#ifndef MYNEWT_VAL_MSYS_2_BLOCK_COUNT -#define MYNEWT_VAL_MSYS_2_BLOCK_COUNT (0) -#endif - -#ifndef MYNEWT_VAL_MSYS_2_BLOCK_SIZE -#define MYNEWT_VAL_MSYS_2_BLOCK_SIZE (0) -#endif - -#ifndef MYNEWT_VAL_OS_CLI -#define MYNEWT_VAL_OS_CLI (0) -#endif - -#ifndef MYNEWT_VAL_OS_COREDUMP -#define MYNEWT_VAL_OS_COREDUMP (0) -#endif - -/* Overridden by hw/bsp/nrf52840pdk (defined by kernel/os) */ -#ifndef MYNEWT_VAL_OS_CPUTIME_FREQ -#define MYNEWT_VAL_OS_CPUTIME_FREQ (32768) -#endif - -/* Overridden by hw/bsp/nrf52840pdk (defined by kernel/os) */ -#ifndef MYNEWT_VAL_OS_CPUTIME_TIMER_NUM -#define MYNEWT_VAL_OS_CPUTIME_TIMER_NUM (5) -#endif - -#ifndef MYNEWT_VAL_OS_CTX_SW_STACK_CHECK -#define MYNEWT_VAL_OS_CTX_SW_STACK_CHECK (0) -#endif - -#ifndef MYNEWT_VAL_OS_CTX_SW_STACK_GUARD -#define MYNEWT_VAL_OS_CTX_SW_STACK_GUARD (4) -#endif - -#ifndef MYNEWT_VAL_OS_MAIN_STACK_SIZE -#define MYNEWT_VAL_OS_MAIN_STACK_SIZE (1024) -#endif - -#ifndef MYNEWT_VAL_OS_MAIN_TASK_PRIO -#define MYNEWT_VAL_OS_MAIN_TASK_PRIO (127) -#endif - -#ifndef MYNEWT_VAL_OS_MEMPOOL_CHECK -#define MYNEWT_VAL_OS_MEMPOOL_CHECK (0) -#endif - -#ifndef MYNEWT_VAL_OS_MEMPOOL_POISON -#define MYNEWT_VAL_OS_MEMPOOL_POISON (0) -#endif - -#ifndef MYNEWT_VAL_OS_SCHEDULING -#define MYNEWT_VAL_OS_SCHEDULING (1) -#endif - -#ifndef MYNEWT_VAL_OS_SYSVIEW -#define MYNEWT_VAL_OS_SYSVIEW (0) -#endif - -#ifndef MYNEWT_VAL_SANITY_INTERVAL -#define MYNEWT_VAL_SANITY_INTERVAL (15000) -#endif - -#ifndef MYNEWT_VAL_WATCHDOG_INTERVAL -#define MYNEWT_VAL_WATCHDOG_INTERVAL (30000) -#endif - -/*** libc/baselibc */ -#ifndef MYNEWT_VAL_BASELIBC_ASSERT_FILE_LINE -#define MYNEWT_VAL_BASELIBC_ASSERT_FILE_LINE (0) -#endif - -#ifndef MYNEWT_VAL_BASELIBC_PRESENT -#define MYNEWT_VAL_BASELIBC_PRESENT (1) -#endif - -/*** nimble */ -#ifndef MYNEWT_VAL_BLE_EXT_ADV -#define MYNEWT_VAL_BLE_EXT_ADV (0) -#endif - -#ifndef MYNEWT_VAL_BLE_EXT_ADV_MAX_SIZE -#define MYNEWT_VAL_BLE_EXT_ADV_MAX_SIZE (31) -#endif - -#ifndef MYNEWT_VAL_BLE_MAX_CONNECTIONS -#define MYNEWT_VAL_BLE_MAX_CONNECTIONS (1) -#endif - -#ifndef MYNEWT_VAL_BLE_MULTI_ADV_INSTANCES -#define MYNEWT_VAL_BLE_MULTI_ADV_INSTANCES (0) -#endif - -#ifndef MYNEWT_VAL_BLE_ROLE_BROADCASTER -#define MYNEWT_VAL_BLE_ROLE_BROADCASTER (1) -#endif - -#ifndef MYNEWT_VAL_BLE_ROLE_CENTRAL -#define MYNEWT_VAL_BLE_ROLE_CENTRAL (1) -#endif - -#ifndef MYNEWT_VAL_BLE_ROLE_OBSERVER -#define MYNEWT_VAL_BLE_ROLE_OBSERVER (1) -#endif - -#ifndef MYNEWT_VAL_BLE_ROLE_PERIPHERAL -#define MYNEWT_VAL_BLE_ROLE_PERIPHERAL (1) -#endif - -#ifndef MYNEWT_VAL_BLE_WHITELIST -#define MYNEWT_VAL_BLE_WHITELIST (1) -#endif - -/*** nimble/controller */ -#ifndef MYNEWT_VAL_BLE_DEVICE -#define MYNEWT_VAL_BLE_DEVICE (1) -#endif - -/* Overridden by nimble/controller (defined by nimble/controller) */ -#ifndef MYNEWT_VAL_BLE_HW_WHITELIST_ENABLE -#define MYNEWT_VAL_BLE_HW_WHITELIST_ENABLE (0) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_ADD_STRICT_SCHED_PERIODS -#define MYNEWT_VAL_BLE_LL_ADD_STRICT_SCHED_PERIODS (0) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_CFG_FEAT_CONN_PARAM_REQ -#define MYNEWT_VAL_BLE_LL_CFG_FEAT_CONN_PARAM_REQ (1) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_CFG_FEAT_DATA_LEN_EXT -#define MYNEWT_VAL_BLE_LL_CFG_FEAT_DATA_LEN_EXT (1) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_CFG_FEAT_EXT_SCAN_FILT -#define MYNEWT_VAL_BLE_LL_CFG_FEAT_EXT_SCAN_FILT (0) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_CFG_FEAT_LE_2M_PHY -#define MYNEWT_VAL_BLE_LL_CFG_FEAT_LE_2M_PHY (0) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_CFG_FEAT_LE_CODED_PHY -#define MYNEWT_VAL_BLE_LL_CFG_FEAT_LE_CODED_PHY (0) -#endif - -/* Overridden by nimble/controller (defined by nimble/controller) */ -#ifndef MYNEWT_VAL_BLE_LL_CFG_FEAT_LE_CSA2 -#define MYNEWT_VAL_BLE_LL_CFG_FEAT_LE_CSA2 (1) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_CFG_FEAT_LE_ENCRYPTION -#define MYNEWT_VAL_BLE_LL_CFG_FEAT_LE_ENCRYPTION (1) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_CFG_FEAT_LE_PING -#define MYNEWT_VAL_BLE_LL_CFG_FEAT_LE_PING (MYNEWT_VAL_BLE_LL_CFG_FEAT_LE_ENCRYPTION) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_CFG_FEAT_LL_EXT_ADV -#define MYNEWT_VAL_BLE_LL_CFG_FEAT_LL_EXT_ADV (MYNEWT_VAL_BLE_EXT_ADV) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_CFG_FEAT_LL_PRIVACY -#define MYNEWT_VAL_BLE_LL_CFG_FEAT_LL_PRIVACY (1) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_CFG_FEAT_SLAVE_INIT_FEAT_XCHG -#define MYNEWT_VAL_BLE_LL_CFG_FEAT_SLAVE_INIT_FEAT_XCHG (1) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_CONN_INIT_MAX_TX_BYTES -#define MYNEWT_VAL_BLE_LL_CONN_INIT_MAX_TX_BYTES (27) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_CONN_INIT_MIN_WIN_OFFSET -#define MYNEWT_VAL_BLE_LL_CONN_INIT_MIN_WIN_OFFSET (0) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_CONN_INIT_SLOTS -#define MYNEWT_VAL_BLE_LL_CONN_INIT_SLOTS (4) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_DIRECT_TEST_MODE -#define MYNEWT_VAL_BLE_LL_DIRECT_TEST_MODE (0) -#endif - -/* Overridden by nimble/controller (defined by nimble/controller) */ -#ifndef MYNEWT_VAL_BLE_LL_EXT_ADV_AUX_PTR_CNT -#define MYNEWT_VAL_BLE_LL_EXT_ADV_AUX_PTR_CNT (5) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_MASTER_SCA -#define MYNEWT_VAL_BLE_LL_MASTER_SCA (4) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_MAX_PKT_SIZE -#define MYNEWT_VAL_BLE_LL_MAX_PKT_SIZE (251) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_MFRG_ID -#define MYNEWT_VAL_BLE_LL_MFRG_ID (0xFFFF) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_NUM_SCAN_DUP_ADVS -#define MYNEWT_VAL_BLE_LL_NUM_SCAN_DUP_ADVS (8) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_NUM_SCAN_RSP_ADVS -#define MYNEWT_VAL_BLE_LL_NUM_SCAN_RSP_ADVS (8) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_OUR_SCA -#define MYNEWT_VAL_BLE_LL_OUR_SCA (60) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_PRIO -#define MYNEWT_VAL_BLE_LL_PRIO (0) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_RESOLV_LIST_SIZE -#define MYNEWT_VAL_BLE_LL_RESOLV_LIST_SIZE (4) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_RNG_BUFSIZE -#define MYNEWT_VAL_BLE_LL_RNG_BUFSIZE (32) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_STRICT_CONN_SCHEDULING -#define MYNEWT_VAL_BLE_LL_STRICT_CONN_SCHEDULING (0) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_SUPP_MAX_RX_BYTES -#define MYNEWT_VAL_BLE_LL_SUPP_MAX_RX_BYTES (MYNEWT_VAL_BLE_LL_MAX_PKT_SIZE) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_SUPP_MAX_TX_BYTES -#define MYNEWT_VAL_BLE_LL_SUPP_MAX_TX_BYTES (MYNEWT_VAL_BLE_LL_MAX_PKT_SIZE) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_TX_PWR_DBM -#define MYNEWT_VAL_BLE_LL_TX_PWR_DBM (0) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_USECS_PER_PERIOD -#define MYNEWT_VAL_BLE_LL_USECS_PER_PERIOD (3250) -#endif - -#ifndef MYNEWT_VAL_BLE_LL_WHITELIST_SIZE -#define MYNEWT_VAL_BLE_LL_WHITELIST_SIZE (8) -#endif - -#ifndef MYNEWT_VAL_BLE_LP_CLOCK -#define MYNEWT_VAL_BLE_LP_CLOCK (1) -#endif - -#ifndef MYNEWT_VAL_BLE_NUM_COMP_PKT_RATE -#define MYNEWT_VAL_BLE_NUM_COMP_PKT_RATE ((2 * 128)) /* XXX */ -#endif - -#ifndef MYNEWT_VAL_BLE_PUBLIC_DEV_ADDR -#define MYNEWT_VAL_BLE_PUBLIC_DEV_ADDR ((uint8_t[6]){0x00, 0x00, 0x00, 0x00, 0x00, 0x00}) -#endif - -/* Overridden by hw/bsp/nrf52840pdk (defined by nimble/controller) */ -#ifndef MYNEWT_VAL_BLE_XTAL_SETTLE_TIME -#define MYNEWT_VAL_BLE_XTAL_SETTLE_TIME (1500) -#endif - -/*** nimble/drivers/nrf52 */ -#ifndef MYNEWT_VAL_BLE_PHY_CODED_RX_IFS_EXTRA_MARGIN -#define MYNEWT_VAL_BLE_PHY_CODED_RX_IFS_EXTRA_MARGIN (0) -#endif - -#ifndef MYNEWT_VAL_BLE_PHY_DBG_TIME_ADDRESS_END_PIN -#define MYNEWT_VAL_BLE_PHY_DBG_TIME_ADDRESS_END_PIN (-1) -#endif - -#ifndef MYNEWT_VAL_BLE_PHY_DBG_TIME_TXRXEN_READY_PIN -#define MYNEWT_VAL_BLE_PHY_DBG_TIME_TXRXEN_READY_PIN (-1) -#endif - -#ifndef MYNEWT_VAL_BLE_PHY_DBG_TIME_WFR_PIN -#define MYNEWT_VAL_BLE_PHY_DBG_TIME_WFR_PIN (-1) -#endif - -#ifndef MYNEWT_VAL_BLE_PHY_NRF52840_ERRATA_164 -#define MYNEWT_VAL_BLE_PHY_NRF52840_ERRATA_164 (0) -#endif - -#ifndef MYNEWT_VAL_BLE_PHY_NRF52840_ERRATA_191 -#define MYNEWT_VAL_BLE_PHY_NRF52840_ERRATA_191 (1) -#endif - -/*** nimble/host */ -#ifndef MYNEWT_VAL_BLE_ATT_PREFERRED_MTU -#define MYNEWT_VAL_BLE_ATT_PREFERRED_MTU (256) -#endif - -#ifndef MYNEWT_VAL_BLE_ATT_SVR_FIND_INFO -#define MYNEWT_VAL_BLE_ATT_SVR_FIND_INFO (1) -#endif - -#ifndef MYNEWT_VAL_BLE_ATT_SVR_FIND_TYPE -#define MYNEWT_VAL_BLE_ATT_SVR_FIND_TYPE (1) -#endif - -#ifndef MYNEWT_VAL_BLE_ATT_SVR_INDICATE -#define MYNEWT_VAL_BLE_ATT_SVR_INDICATE (1) -#endif - -#ifndef MYNEWT_VAL_BLE_ATT_SVR_MAX_PREP_ENTRIES -#define MYNEWT_VAL_BLE_ATT_SVR_MAX_PREP_ENTRIES (64) -#endif - -#ifndef MYNEWT_VAL_BLE_ATT_SVR_NOTIFY -#define MYNEWT_VAL_BLE_ATT_SVR_NOTIFY (1) -#endif - -#ifndef MYNEWT_VAL_BLE_ATT_SVR_QUEUED_WRITE -#define MYNEWT_VAL_BLE_ATT_SVR_QUEUED_WRITE (1) -#endif - -#ifndef MYNEWT_VAL_BLE_ATT_SVR_QUEUED_WRITE_TMO -#define MYNEWT_VAL_BLE_ATT_SVR_QUEUED_WRITE_TMO (30000) -#endif - -#ifndef MYNEWT_VAL_BLE_ATT_SVR_READ -#define MYNEWT_VAL_BLE_ATT_SVR_READ (1) -#endif - -#ifndef MYNEWT_VAL_BLE_ATT_SVR_READ_BLOB -#define MYNEWT_VAL_BLE_ATT_SVR_READ_BLOB (1) -#endif - -#ifndef MYNEWT_VAL_BLE_ATT_SVR_READ_GROUP_TYPE -#define MYNEWT_VAL_BLE_ATT_SVR_READ_GROUP_TYPE (1) -#endif - -#ifndef MYNEWT_VAL_BLE_ATT_SVR_READ_MULT -#define MYNEWT_VAL_BLE_ATT_SVR_READ_MULT (1) -#endif - -#ifndef MYNEWT_VAL_BLE_ATT_SVR_READ_TYPE -#define MYNEWT_VAL_BLE_ATT_SVR_READ_TYPE (1) -#endif - -#ifndef MYNEWT_VAL_BLE_ATT_SVR_SIGNED_WRITE -#define MYNEWT_VAL_BLE_ATT_SVR_SIGNED_WRITE (1) -#endif - -#ifndef MYNEWT_VAL_BLE_ATT_SVR_WRITE -#define MYNEWT_VAL_BLE_ATT_SVR_WRITE (1) -#endif - -#ifndef MYNEWT_VAL_BLE_ATT_SVR_WRITE_NO_RSP -#define MYNEWT_VAL_BLE_ATT_SVR_WRITE_NO_RSP (1) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_DISC_ALL_CHRS -#define MYNEWT_VAL_BLE_GATT_DISC_ALL_CHRS (MYNEWT_VAL_BLE_ROLE_CENTRAL) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_DISC_ALL_DSCS -#define MYNEWT_VAL_BLE_GATT_DISC_ALL_DSCS (MYNEWT_VAL_BLE_ROLE_CENTRAL) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_DISC_ALL_SVCS -#define MYNEWT_VAL_BLE_GATT_DISC_ALL_SVCS (MYNEWT_VAL_BLE_ROLE_CENTRAL) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_DISC_CHR_UUID -#define MYNEWT_VAL_BLE_GATT_DISC_CHR_UUID (MYNEWT_VAL_BLE_ROLE_CENTRAL) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_DISC_SVC_UUID -#define MYNEWT_VAL_BLE_GATT_DISC_SVC_UUID (MYNEWT_VAL_BLE_ROLE_CENTRAL) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_FIND_INC_SVCS -#define MYNEWT_VAL_BLE_GATT_FIND_INC_SVCS (MYNEWT_VAL_BLE_ROLE_CENTRAL) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_INDICATE -#define MYNEWT_VAL_BLE_GATT_INDICATE (1) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_MAX_PROCS -#define MYNEWT_VAL_BLE_GATT_MAX_PROCS (4) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_NOTIFY -#define MYNEWT_VAL_BLE_GATT_NOTIFY (1) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_READ -#define MYNEWT_VAL_BLE_GATT_READ (MYNEWT_VAL_BLE_ROLE_CENTRAL) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_READ_LONG -#define MYNEWT_VAL_BLE_GATT_READ_LONG (MYNEWT_VAL_BLE_ROLE_CENTRAL) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_READ_MAX_ATTRS -#define MYNEWT_VAL_BLE_GATT_READ_MAX_ATTRS (8) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_READ_MULT -#define MYNEWT_VAL_BLE_GATT_READ_MULT (MYNEWT_VAL_BLE_ROLE_CENTRAL) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_READ_UUID -#define MYNEWT_VAL_BLE_GATT_READ_UUID (MYNEWT_VAL_BLE_ROLE_CENTRAL) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_RESUME_RATE -#define MYNEWT_VAL_BLE_GATT_RESUME_RATE (1000) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_SIGNED_WRITE -#define MYNEWT_VAL_BLE_GATT_SIGNED_WRITE (MYNEWT_VAL_BLE_ROLE_CENTRAL) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_WRITE -#define MYNEWT_VAL_BLE_GATT_WRITE (MYNEWT_VAL_BLE_ROLE_CENTRAL) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_WRITE_LONG -#define MYNEWT_VAL_BLE_GATT_WRITE_LONG (MYNEWT_VAL_BLE_ROLE_CENTRAL) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_WRITE_MAX_ATTRS -#define MYNEWT_VAL_BLE_GATT_WRITE_MAX_ATTRS (4) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_WRITE_NO_RSP -#define MYNEWT_VAL_BLE_GATT_WRITE_NO_RSP (MYNEWT_VAL_BLE_ROLE_CENTRAL) -#endif - -#ifndef MYNEWT_VAL_BLE_GATT_WRITE_RELIABLE -#define MYNEWT_VAL_BLE_GATT_WRITE_RELIABLE (MYNEWT_VAL_BLE_ROLE_CENTRAL) -#endif - -#ifndef MYNEWT_VAL_BLE_HOST -#define MYNEWT_VAL_BLE_HOST (1) -#endif - -#ifndef MYNEWT_VAL_BLE_HS_DEBUG -#define MYNEWT_VAL_BLE_HS_DEBUG (0) -#endif - -#ifndef MYNEWT_VAL_BLE_HS_FLOW_CTRL -#define MYNEWT_VAL_BLE_HS_FLOW_CTRL (0) -#endif - -#ifndef MYNEWT_VAL_BLE_HS_FLOW_CTRL_ITVL -#define MYNEWT_VAL_BLE_HS_FLOW_CTRL_ITVL (1000) -#endif - -#ifndef MYNEWT_VAL_BLE_HS_FLOW_CTRL_THRESH -#define MYNEWT_VAL_BLE_HS_FLOW_CTRL_THRESH (2) -#endif - -#ifndef MYNEWT_VAL_BLE_HS_FLOW_CTRL_TX_ON_DISCONNECT -#define MYNEWT_VAL_BLE_HS_FLOW_CTRL_TX_ON_DISCONNECT (0) -#endif - -#ifndef MYNEWT_VAL_BLE_HS_PHONY_HCI_ACKS -#define MYNEWT_VAL_BLE_HS_PHONY_HCI_ACKS (0) -#endif - -#ifndef MYNEWT_VAL_BLE_HS_REQUIRE_OS -#define MYNEWT_VAL_BLE_HS_REQUIRE_OS (1) -#endif - -#ifndef MYNEWT_VAL_BLE_L2CAP_COC_MAX_NUM -#define MYNEWT_VAL_BLE_L2CAP_COC_MAX_NUM (0) -#endif - -#ifndef MYNEWT_VAL_BLE_L2CAP_JOIN_RX_FRAGS -#define MYNEWT_VAL_BLE_L2CAP_JOIN_RX_FRAGS (1) -#endif - -#ifndef MYNEWT_VAL_BLE_L2CAP_MAX_CHANS -#define MYNEWT_VAL_BLE_L2CAP_MAX_CHANS (3*MYNEWT_VAL_BLE_MAX_CONNECTIONS) -#endif - -#ifndef MYNEWT_VAL_BLE_L2CAP_RX_FRAG_TIMEOUT -#define MYNEWT_VAL_BLE_L2CAP_RX_FRAG_TIMEOUT (30000) -#endif - -#ifndef MYNEWT_VAL_BLE_L2CAP_SIG_MAX_PROCS -#define MYNEWT_VAL_BLE_L2CAP_SIG_MAX_PROCS (1) -#endif - -#ifndef MYNEWT_VAL_BLE_MESH -#define MYNEWT_VAL_BLE_MESH (0) -#endif - -#ifndef MYNEWT_VAL_BLE_MONITOR_CONSOLE_BUFFER_SIZE -#define MYNEWT_VAL_BLE_MONITOR_CONSOLE_BUFFER_SIZE (128) -#endif - -#ifndef MYNEWT_VAL_BLE_MONITOR_RTT -#define MYNEWT_VAL_BLE_MONITOR_RTT (0) -#endif - -#ifndef MYNEWT_VAL_BLE_MONITOR_RTT_BUFFERED -#define MYNEWT_VAL_BLE_MONITOR_RTT_BUFFERED (1) -#endif - -#ifndef MYNEWT_VAL_BLE_MONITOR_RTT_BUFFER_NAME -#define MYNEWT_VAL_BLE_MONITOR_RTT_BUFFER_NAME ("monitor") -#endif - -#ifndef MYNEWT_VAL_BLE_MONITOR_RTT_BUFFER_SIZE -#define MYNEWT_VAL_BLE_MONITOR_RTT_BUFFER_SIZE (256) -#endif - -#ifndef MYNEWT_VAL_BLE_MONITOR_UART -#define MYNEWT_VAL_BLE_MONITOR_UART (0) -#endif - -#ifndef MYNEWT_VAL_BLE_MONITOR_UART_BAUDRATE -#define MYNEWT_VAL_BLE_MONITOR_UART_BAUDRATE (1000000) -#endif - -#ifndef MYNEWT_VAL_BLE_MONITOR_UART_BUFFER_SIZE -#define MYNEWT_VAL_BLE_MONITOR_UART_BUFFER_SIZE (64) -#endif - -#ifndef MYNEWT_VAL_BLE_MONITOR_UART_DEV -#define MYNEWT_VAL_BLE_MONITOR_UART_DEV ("uart0") -#endif - -#ifndef MYNEWT_VAL_BLE_RPA_TIMEOUT -#define MYNEWT_VAL_BLE_RPA_TIMEOUT (300) -#endif - -#ifndef MYNEWT_VAL_BLE_SM_BONDING -#define MYNEWT_VAL_BLE_SM_BONDING (0) -#endif - -#ifndef MYNEWT_VAL_BLE_SM_IO_CAP -#define MYNEWT_VAL_BLE_SM_IO_CAP (BLE_HS_IO_NO_INPUT_OUTPUT) -#endif - -#ifndef MYNEWT_VAL_BLE_SM_KEYPRESS -#define MYNEWT_VAL_BLE_SM_KEYPRESS (0) -#endif - -#ifndef MYNEWT_VAL_BLE_SM_LEGACY -#define MYNEWT_VAL_BLE_SM_LEGACY (1) -#endif - -#ifndef MYNEWT_VAL_BLE_SM_MAX_PROCS -#define MYNEWT_VAL_BLE_SM_MAX_PROCS (1) -#endif - -#ifndef MYNEWT_VAL_BLE_SM_MITM -#define MYNEWT_VAL_BLE_SM_MITM (0) -#endif - -#ifndef MYNEWT_VAL_BLE_SM_OOB_DATA_FLAG -#define MYNEWT_VAL_BLE_SM_OOB_DATA_FLAG (0) -#endif - -#ifndef MYNEWT_VAL_BLE_SM_OUR_KEY_DIST -#define MYNEWT_VAL_BLE_SM_OUR_KEY_DIST (0) -#endif - -#ifndef MYNEWT_VAL_BLE_SM_SC -#define MYNEWT_VAL_BLE_SM_SC (0) -#endif - -#ifndef MYNEWT_VAL_BLE_SM_THEIR_KEY_DIST -#define MYNEWT_VAL_BLE_SM_THEIR_KEY_DIST (0) -#endif - -#ifndef MYNEWT_VAL_BLE_STORE_MAX_BONDS -#define MYNEWT_VAL_BLE_STORE_MAX_BONDS (3) -#endif - -#ifndef MYNEWT_VAL_BLE_STORE_MAX_CCCDS -#define MYNEWT_VAL_BLE_STORE_MAX_CCCDS (8) -#endif - -/*** nimble/host/services/ans */ -#ifndef MYNEWT_VAL_BLE_SVC_ANS_NEW_ALERT_CAT -#define MYNEWT_VAL_BLE_SVC_ANS_NEW_ALERT_CAT (0) -#endif - -#ifndef MYNEWT_VAL_BLE_SVC_ANS_UNR_ALERT_CAT -#define MYNEWT_VAL_BLE_SVC_ANS_UNR_ALERT_CAT (0) -#endif - -/*** nimble/host/services/bas */ -#ifndef MYNEWT_VAL_BLE_SVC_BAS_BATTERY_LEVEL_NOTIFY_ENABLE -#define MYNEWT_VAL_BLE_SVC_BAS_BATTERY_LEVEL_NOTIFY_ENABLE (1) -#endif - -#ifndef MYNEWT_VAL_BLE_SVC_BAS_BATTERY_LEVEL_READ_PERM -#define MYNEWT_VAL_BLE_SVC_BAS_BATTERY_LEVEL_READ_PERM (0) -#endif - -/*** nimble/host/services/gap */ -#ifndef MYNEWT_VAL_BLE_SVC_GAP_APPEARANCE -#define MYNEWT_VAL_BLE_SVC_GAP_APPEARANCE (0) -#endif - -#ifndef MYNEWT_VAL_BLE_SVC_GAP_APPEARANCE_WRITE_PERM -#define MYNEWT_VAL_BLE_SVC_GAP_APPEARANCE_WRITE_PERM (-1) -#endif - -#ifndef MYNEWT_VAL_BLE_SVC_GAP_CENTRAL_ADDRESS_RESOLUTION -#define MYNEWT_VAL_BLE_SVC_GAP_CENTRAL_ADDRESS_RESOLUTION (-1) -#endif - -#ifndef MYNEWT_VAL_BLE_SVC_GAP_DEVICE_NAME -#define MYNEWT_VAL_BLE_SVC_GAP_DEVICE_NAME ("nimble") -#endif - -#ifndef MYNEWT_VAL_BLE_SVC_GAP_DEVICE_NAME_MAX_LENGTH -#define MYNEWT_VAL_BLE_SVC_GAP_DEVICE_NAME_MAX_LENGTH (31) -#endif - -#ifndef MYNEWT_VAL_BLE_SVC_GAP_DEVICE_NAME_WRITE_PERM -#define MYNEWT_VAL_BLE_SVC_GAP_DEVICE_NAME_WRITE_PERM (-1) -#endif - -#ifndef MYNEWT_VAL_BLE_SVC_GAP_PPCP_MAX_CONN_INTERVAL -#define MYNEWT_VAL_BLE_SVC_GAP_PPCP_MAX_CONN_INTERVAL (0) -#endif - -#ifndef MYNEWT_VAL_BLE_SVC_GAP_PPCP_MIN_CONN_INTERVAL -#define MYNEWT_VAL_BLE_SVC_GAP_PPCP_MIN_CONN_INTERVAL (0) -#endif - -#ifndef MYNEWT_VAL_BLE_SVC_GAP_PPCP_SLAVE_LATENCY -#define MYNEWT_VAL_BLE_SVC_GAP_PPCP_SLAVE_LATENCY (0) -#endif - -#ifndef MYNEWT_VAL_BLE_SVC_GAP_PPCP_SUPERVISION_TMO -#define MYNEWT_VAL_BLE_SVC_GAP_PPCP_SUPERVISION_TMO (0) -#endif - -/*** nimble/transport */ -#ifndef MYNEWT_VAL_BLE_HCI_TRANSPORT_EMSPI -#define MYNEWT_VAL_BLE_HCI_TRANSPORT_EMSPI (0) -#endif - -#ifndef MYNEWT_VAL_BLE_HCI_TRANSPORT_NIMBLE_BUILTIN -#define MYNEWT_VAL_BLE_HCI_TRANSPORT_NIMBLE_BUILTIN (1) -#endif - -#ifndef MYNEWT_VAL_BLE_HCI_TRANSPORT_RAM -#define MYNEWT_VAL_BLE_HCI_TRANSPORT_RAM (0) -#endif - -#ifndef MYNEWT_VAL_BLE_HCI_TRANSPORT_SOCKET -#define MYNEWT_VAL_BLE_HCI_TRANSPORT_SOCKET (0) -#endif - -#ifndef MYNEWT_VAL_BLE_HCI_TRANSPORT_UART -#define MYNEWT_VAL_BLE_HCI_TRANSPORT_UART (0) -#endif - -/*** nimble/transport/ram */ -#ifndef MYNEWT_VAL_BLE_ACL_BUF_COUNT -#define MYNEWT_VAL_BLE_ACL_BUF_COUNT (4) -#endif - -#ifndef MYNEWT_VAL_BLE_ACL_BUF_SIZE -#define MYNEWT_VAL_BLE_ACL_BUF_SIZE (255) -#endif - -#ifndef MYNEWT_VAL_BLE_HCI_EVT_BUF_SIZE -#define MYNEWT_VAL_BLE_HCI_EVT_BUF_SIZE (70) -#endif - -#ifndef MYNEWT_VAL_BLE_HCI_EVT_HI_BUF_COUNT -#define MYNEWT_VAL_BLE_HCI_EVT_HI_BUF_COUNT (2) -#endif - -#ifndef MYNEWT_VAL_BLE_HCI_EVT_LO_BUF_COUNT -#define MYNEWT_VAL_BLE_HCI_EVT_LO_BUF_COUNT (8) -#endif - -/*** sys/console/stub */ -#ifndef MYNEWT_VAL_CONSOLE_UART_BAUD -#define MYNEWT_VAL_CONSOLE_UART_BAUD (115200) -#endif - -#ifndef MYNEWT_VAL_CONSOLE_UART_DEV -#define MYNEWT_VAL_CONSOLE_UART_DEV ("uart0") -#endif - -#ifndef MYNEWT_VAL_CONSOLE_UART_FLOW_CONTROL -#define MYNEWT_VAL_CONSOLE_UART_FLOW_CONTROL (UART_FLOW_CTL_NONE) -#endif - -/*** sys/flash_map */ -#ifndef MYNEWT_VAL_FLASH_MAP_MAX_AREAS -#define MYNEWT_VAL_FLASH_MAP_MAX_AREAS (10) -#endif - -/*** sys/log/stub */ -#ifndef MYNEWT_VAL_LOG_CONSOLE -#define MYNEWT_VAL_LOG_CONSOLE (1) -#endif - -#ifndef MYNEWT_VAL_LOG_FCB -#define MYNEWT_VAL_LOG_FCB (0) -#endif - -#ifndef MYNEWT_VAL_LOG_LEVEL -#define MYNEWT_VAL_LOG_LEVEL (255) -#endif - -/*** sys/sysinit */ -#ifndef MYNEWT_VAL_SYSINIT_CONSTRAIN_INIT -#define MYNEWT_VAL_SYSINIT_CONSTRAIN_INIT (1) -#endif - -#ifndef MYNEWT_VAL_SYSINIT_PANIC_FILE_LINE -#define MYNEWT_VAL_SYSINIT_PANIC_FILE_LINE (0) -#endif - -#ifndef MYNEWT_VAL_SYSINIT_PANIC_MESSAGE -#define MYNEWT_VAL_SYSINIT_PANIC_MESSAGE (0) -#endif - -#endif diff --git a/porting/examples/freertos_nrf5_sdk/main.c b/porting/examples/freertos_nrf5_sdk/main.c deleted file mode 100644 index 3a32c8ccd..000000000 --- a/porting/examples/freertos_nrf5_sdk/main.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * Licensed to the Apache Software Foundation (ASF) under one - * or more contributor license agreements. See the NOTICE file - * distributed with this work for additional information - * regarding copyright ownership. The ASF licenses this file - * to you under the Apache License, Version 2.0 (the - * "License"); you may not use this file except in compliance - * with the License. You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, - * software distributed under the License is distributed on an - * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY - * KIND, either express or implied. See the License for the - * specific language governing permissions and limitations - * under the License. - */ - -#include -#include -#include - -#include "FreeRTOS.h" -#include "task.h" -#include "nrf_drv_clock.h" - -#include "nimble/nimble_port.h" - -static TaskHandle_t nimble_host_task_h; -static TaskHandle_t nimble_ctrl_task_h; - -static uint32_t radio_isr_addr; -static uint32_t rng_isr_addr; -static uint32_t rtc0_isr_addr; - -/* Some interrupt handlers required for NimBLE radio driver */ - -void -RADIO_IRQHandler(void) -{ - ((void (*)(void))radio_isr_addr)(); -} - -void -RNG_IRQHandler(void) -{ - ((void (*)(void))rng_isr_addr)(); -} - -void -RTC0_IRQHandler(void) -{ - ((void (*)(void))rtc0_isr_addr)(); -} - -/* This is called by NimBLE radio driver to set interrupt handlers */ -void -npl_freertos_hw_set_isr(int irqn, uint32_t addr) -{ - switch (irqn) { - case RADIO_IRQn: - radio_isr_addr = addr; - break; - case RNG_IRQn: - rng_isr_addr = addr; - break; - case RTC0_IRQn: - rtc0_isr_addr = addr; - break; - } -} - -uint32_t -npl_freertos_hw_enter_critical(void) -{ - uint32_t ctx = __get_PRIMASK(); - __disable_irq(); - return (ctx & 0x01); -} - -void -npl_freertos_hw_exit_critical(uint32_t ctx) -{ - if (!ctx) { - __enable_irq(); - } -} - -int -main(void) -{ - extern void nimble_host_task(void *arg); - - ret_code_t err_code; - - /* Initialize clock driver for better time accuracy in FREERTOS */ - err_code = nrf_drv_clock_init(); - APP_ERROR_CHECK(err_code); - - /* Initialize NimBLE porting layer */ - nimble_port_init(); - - /* - * Create task where NimBLE host will run. It is not strictly necessary to - * have separate task for NimBLE host, but since something needs to handle - * default queue it is just easier to make separate task which does this. - */ - xTaskCreate(nimble_host_task, "nh", configMINIMAL_STACK_SIZE + 400, - NULL, tskIDLE_PRIORITY + 1, &nimble_host_task_h); - - /* - * Create task where NimBLE LL will run. This one is required as LL has its - * own event queue and should have highest priority. The task function is - * provided by NimBLE and in case of FreeRTOS it does not need to be wrapped - * since it has compatible prototype. - */ - xTaskCreate(nimble_port_ll_task_func, "nc", configMINIMAL_STACK_SIZE + 400, - NULL, configMAX_PRIORITIES - 1, &nimble_ctrl_task_h); - - vTaskStartScheduler(); - - /* We should never reach this code */ - assert(0); - - while (true) { - } -} diff --git a/porting/examples/freertos_nrf5_sdk/pca10040/blank/armgcc/Makefile b/porting/examples/freertos_nrf5_sdk/pca10040/blank/armgcc/Makefile deleted file mode 100644 index aa3921dd9..000000000 --- a/porting/examples/freertos_nrf5_sdk/pca10040/blank/armgcc/Makefile +++ /dev/null @@ -1,187 +0,0 @@ -PROJECT_NAME := nimble_FreeRTOS_pca10040 -TARGETS := nrf52832_xxaa -OUTPUT_DIRECTORY := _build - -PROJ_DIR := ../../.. -SDK_ROOT ?= $(PROJ_DIR)/nrf5_sdk - -$(OUTPUT_DIRECTORY)/nrf52832_xxaa.out: \ - LINKER_SCRIPT := nimble_FreeRTOS_gcc_nrf52.ld - -# Source files common to all targets -SRC_FILES += \ - $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \ - $(SDK_ROOT)/components/boards/boards.c \ - $(SDK_ROOT)/external/freertos/source/croutine.c \ - $(SDK_ROOT)/external/freertos/source/event_groups.c \ - $(SDK_ROOT)/external/freertos/source/portable/MemMang/heap_1.c \ - $(SDK_ROOT)/external/freertos/source/list.c \ - $(SDK_ROOT)/external/freertos/portable/GCC/nrf52/port.c \ - $(SDK_ROOT)/external/freertos/portable/CMSIS/nrf52/port_cmsis.c \ - $(SDK_ROOT)/external/freertos/portable/CMSIS/nrf52/port_cmsis_systick.c \ - $(SDK_ROOT)/external/freertos/source/queue.c \ - $(SDK_ROOT)/external/freertos/source/stream_buffer.c \ - $(SDK_ROOT)/external/freertos/source/tasks.c \ - $(SDK_ROOT)/external/freertos/source/timers.c \ - $(SDK_ROOT)/components/libraries/button/app_button.c \ - $(SDK_ROOT)/components/libraries/util/app_error.c \ - $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \ - $(SDK_ROOT)/components/libraries/util/app_error_weak.c \ - $(SDK_ROOT)/components/libraries/timer/app_timer_freertos.c \ - $(SDK_ROOT)/components/libraries/util/app_util_platform.c \ - $(SDK_ROOT)/components/libraries/util/nrf_assert.c \ - $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \ - $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_clock.c \ - $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd/nrf_nvic.c \ - $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd/nrf_soc.c \ - $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_clock.c \ - $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \ - $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_power_clock.c \ - $(SDK_ROOT)/components/libraries/bsp/bsp.c \ - $(PROJ_DIR)/main.c \ - $(PROJ_DIR)/ble.c \ - $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \ - -# Include folders common to all targets -INC_FOLDERS += \ - $(PROJ_DIR)/config \ - $(SDK_ROOT)/components \ - $(SDK_ROOT)/modules/nrfx/mdk \ - $(SDK_ROOT)/components/libraries/experimental_log \ - $(PROJ_DIR) \ - $(SDK_ROOT)/components/libraries/timer \ - $(SDK_ROOT)/components/libraries/strerror \ - $(SDK_ROOT)/components/toolchain/cmsis/include \ - $(SDK_ROOT)/external/freertos/source/include \ - $(SDK_ROOT)/external/freertos/config \ - $(SDK_ROOT)/components/libraries/util \ - ../config \ - $(SDK_ROOT)/components/libraries/balloc \ - $(SDK_ROOT)/modules/nrfx/hal \ - $(SDK_ROOT)/components/libraries/bsp \ - $(SDK_ROOT)/components/libraries/button \ - $(SDK_ROOT)/modules/nrfx \ - $(SDK_ROOT)/components/libraries/experimental_section_vars \ - $(SDK_ROOT)/integration/nrfx/legacy \ - $(SDK_ROOT)/external/freertos/portable/CMSIS/nrf52 \ - $(SDK_ROOT)/components/libraries/experimental_log/src \ - $(SDK_ROOT)/integration/nrfx \ - $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd \ - $(SDK_ROOT)/components/boards \ - $(SDK_ROOT)/components/libraries/experimental_memobj \ - $(SDK_ROOT)/external/freertos/portable/GCC/nrf52 \ - $(SDK_ROOT)/modules/nrfx/drivers/include \ - -# Libraries common to all targets -LIB_FILES += \ - -# Optimization flags -OPT = -Og -g3 -# Uncomment the line below to enable link time optimization -#OPT += -flto - -# C flags common to all targets -CFLAGS += $(OPT) -CFLAGS += -DBOARD_PCA10040 -CFLAGS += -DCONFIG_GPIO_AS_PINRESET -CFLAGS += -DFLOAT_ABI_HARD -CFLAGS += -DFREERTOS -CFLAGS += -DNRF52 -CFLAGS += -DNRF52832_XXAA -CFLAGS += -DNRF52_PAN_74 -CFLAGS += -mcpu=cortex-m4 -CFLAGS += -mthumb -mabi=aapcs -CFLAGS += -Wall -Werror -CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 -# keep every function in a separate section, this allows linker to discard unused ones -CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing -CFLAGS += -fno-builtin -fshort-enums - -# C++ flags common to all targets -CXXFLAGS += $(OPT) - -# Assembler flags common to all targets -ASMFLAGS += -g3 -ASMFLAGS += -mcpu=cortex-m4 -ASMFLAGS += -mthumb -mabi=aapcs -ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 -ASMFLAGS += -DBOARD_PCA10040 -ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET -ASMFLAGS += -DFLOAT_ABI_HARD -ASMFLAGS += -DFREERTOS -ASMFLAGS += -DNRF52 -ASMFLAGS += -DNRF52832_XXAA -ASMFLAGS += -DNRF52_PAN_74 - -# Linker flags -LDFLAGS += $(OPT) -LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT) -LDFLAGS += -mcpu=cortex-m4 -LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 -# let linker dump unused sections -LDFLAGS += -Wl,--gc-sections -# use newlib in nano version -LDFLAGS += --specs=nano.specs - -nrf52832_xxaa: CFLAGS += -D__HEAP_SIZE=8192 -nrf52832_xxaa: CFLAGS += -D__STACK_SIZE=8192 -nrf52832_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192 -nrf52832_xxaa: ASMFLAGS += -D__STACK_SIZE=8192 - -# Add standard libraries at the very end of the linker input, after all objects -# that may need symbols provided by these libraries. -LIB_FILES += -lc -lnosys -lm - -# Configure NimBLE variables -NIMBLE_ROOT := $(PROJ_DIR)/../../.. -NIMBLE_CFG_CONTROLLER := 1 -NIMBLE_CFG_TINYCRYPT := 1 -include $(NIMBLE_ROOT)/porting/nimble/Makefile.defs - -# Add NimBLE CFLAGS -CFLAGS += $(NIMBLE_CFLAGS) - -# Add NPL for FreeRTOS, UART HCI transport for nRF5 SDK and all NimBLE sources -SRC_FILES += \ - $(NIMBLE_ROOT)/porting/npl/freertos/src/npl_os_freertos.c \ - $(NIMBLE_SRC) \ - -# Add NPL for FreeRTOS and all NimBLE directories to include paths -INC_FOLDERS += \ - $(PROJ_DIR)/include \ - $(NIMBLE_ROOT)/porting/npl/freertos/include \ - $(NIMBLE_INCLUDE) \ - -.PHONY: default help - -# Default target - first one defined -default: nrf52832_xxaa - -# Print all targets that can be built -help: - @echo following targets are available: - @echo nrf52832_xxaa - @echo sdk_config - starting external tool for editing sdk_config.h - @echo flash - flashing binary - -TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc - -include $(TEMPLATE_PATH)/Makefile.common - -$(foreach target, $(TARGETS), $(call define_target, $(target))) - -.PHONY: flash erase - -# Flash the program -flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex - @echo Flashing: $< - nrfjprog -f nrf52 --program $< --sectorerase - nrfjprog -f nrf52 --reset - -erase: - nrfjprog -f nrf52 --eraseall - -SDK_CONFIG_FILE := ../config/sdk_config.h -CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar -sdk_config: - java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE) diff --git a/porting/examples/freertos_nrf5_sdk/pca10040/blank/armgcc/nimble_FreeRTOS_gcc_nrf52.ld b/porting/examples/freertos_nrf5_sdk/pca10040/blank/armgcc/nimble_FreeRTOS_gcc_nrf52.ld deleted file mode 100644 index 01dbefadc..000000000 --- a/porting/examples/freertos_nrf5_sdk/pca10040/blank/armgcc/nimble_FreeRTOS_gcc_nrf52.ld +++ /dev/null @@ -1,51 +0,0 @@ -/* Linker script to configure memory regions. */ - -SEARCH_DIR(.) -GROUP(-lgcc -lc -lnosys) - -MEMORY -{ - FLASH (rx) : ORIGIN = 0x0, LENGTH = 0x80000 - RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x10000 -} - -SECTIONS -{ -} - -SECTIONS -{ - . = ALIGN(4); - .mem_section_dummy_ram : - { - } - .log_dynamic_data : - { - PROVIDE(__start_log_dynamic_data = .); - KEEP(*(SORT(.log_dynamic_data*))) - PROVIDE(__stop_log_dynamic_data = .); - } > RAM - -} INSERT AFTER .data; - -SECTIONS -{ - .mem_section_dummy_rom : - { - } - .log_const_data : - { - PROVIDE(__start_log_const_data = .); - KEEP(*(SORT(.log_const_data*))) - PROVIDE(__stop_log_const_data = .); - } > FLASH - .nrf_balloc : - { - PROVIDE(__start_nrf_balloc = .); - KEEP(*(.nrf_balloc)) - PROVIDE(__stop_nrf_balloc = .); - } > FLASH - -} INSERT AFTER .text - -INCLUDE "nrf_common.ld" diff --git a/porting/examples/freertos_nrf5_sdk/pca10040/blank/config/sdk_config.h b/porting/examples/freertos_nrf5_sdk/pca10040/blank/config/sdk_config.h deleted file mode 100644 index d37ed6f25..000000000 --- a/porting/examples/freertos_nrf5_sdk/pca10040/blank/config/sdk_config.h +++ /dev/null @@ -1,2924 +0,0 @@ -/** - * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA - * - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - */ - - - -#ifndef SDK_CONFIG_H -#define SDK_CONFIG_H -// <<< Use Configuration Wizard in Context Menu >>>\n -#ifdef USE_APP_CONFIG -#include "app_config.h" -#endif -// nRF_Drivers - -//========================================================== -// CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver - legacy layer -//========================================================== -#ifndef CLOCK_ENABLED -#define CLOCK_ENABLED 1 -#endif -// CLOCK_CONFIG_LF_SRC - LF Clock Source - -// <0=> RC -// <1=> XTAL -// <2=> Synth - -#ifndef CLOCK_CONFIG_LF_SRC -#define CLOCK_CONFIG_LF_SRC 1 -#endif - -// CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority - - -// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 - -#ifndef CLOCK_CONFIG_IRQ_PRIORITY -#define CLOCK_CONFIG_IRQ_PRIORITY 7 -#endif - -// - -// GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer -//========================================================== -#ifndef GPIOTE_ENABLED -#define GPIOTE_ENABLED 1 -#endif -// GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins -#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS -#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4 -#endif - -// GPIOTE_CONFIG_IRQ_PRIORITY - Interrupt priority - - -// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 - -#ifndef GPIOTE_CONFIG_IRQ_PRIORITY -#define GPIOTE_CONFIG_IRQ_PRIORITY 7 -#endif - -// - -// NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver -//========================================================== -#ifndef NRFX_CLOCK_ENABLED -#define NRFX_CLOCK_ENABLED 1 -#endif -// NRFX_CLOCK_CONFIG_LF_SRC - LF Clock Source - -// <0=> RC -// <1=> XTAL -// <2=> Synth - -#ifndef NRFX_CLOCK_CONFIG_LF_SRC -#define NRFX_CLOCK_CONFIG_LF_SRC 1 -#endif - -// NRFX_CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority - -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 - -#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY -#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7 -#endif - -// NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED -#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0 -#endif -// NRFX_CLOCK_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL -#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3 -#endif - -// NRFX_CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR -#define NRFX_CLOCK_CONFIG_INFO_COLOR 0 -#endif - -// NRFX_CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR -#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// - -// NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver -//========================================================== -#ifndef NRFX_GPIOTE_ENABLED -#define NRFX_GPIOTE_ENABLED 1 -#endif -// NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins -#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS -#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1 -#endif - -// NRFX_GPIOTE_CONFIG_IRQ_PRIORITY - Interrupt priority - -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 - -#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY -#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7 -#endif - -// NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED -#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0 -#endif -// NRFX_GPIOTE_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL -#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3 -#endif - -// NRFX_GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR -#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0 -#endif - -// NRFX_GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR -#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// - -// -//========================================================== - -// nRF_Libraries - -//========================================================== -// APP_TIMER_ENABLED - app_timer - Application timer functionality -//========================================================== -#ifndef APP_TIMER_ENABLED -#define APP_TIMER_ENABLED 1 -#endif -// APP_TIMER_CONFIG_RTC_FREQUENCY - Configure RTC prescaler. - -// <0=> 32768 Hz -// <1=> 16384 Hz -// <3=> 8192 Hz -// <7=> 4096 Hz -// <15=> 2048 Hz -// <31=> 1024 Hz - -#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY -#define APP_TIMER_CONFIG_RTC_FREQUENCY 0 -#endif - -// APP_TIMER_CONFIG_IRQ_PRIORITY - Interrupt priority - - -// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 - -#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY -#define APP_TIMER_CONFIG_IRQ_PRIORITY 7 -#endif - -// APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. -// Size of the queue depends on how many timers are used -// in the system, how often timers are started and overall -// system latency. If queue size is too small app_timer calls -// will fail. - -#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE -#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10 -#endif - -// APP_TIMER_CONFIG_USE_SCHEDULER - Enable scheduling app_timer events to app_scheduler - - -#ifndef APP_TIMER_CONFIG_USE_SCHEDULER -#define APP_TIMER_CONFIG_USE_SCHEDULER 0 -#endif - -// APP_TIMER_KEEPS_RTC_ACTIVE - Enable RTC always on - - -// If option is enabled RTC is kept running even if there is no active timers. -// This option can be used when app_timer is used for timestamping. - -#ifndef APP_TIMER_KEEPS_RTC_ACTIVE -#define APP_TIMER_KEEPS_RTC_ACTIVE 0 -#endif - -// App Timer Legacy configuration - Legacy configuration. - -//========================================================== -// APP_TIMER_WITH_PROFILER - Enable app_timer profiling - - -#ifndef APP_TIMER_WITH_PROFILER -#define APP_TIMER_WITH_PROFILER 0 -#endif - -// APP_TIMER_CONFIG_SWI_NUMBER - Configure SWI instance used. - - -#ifndef APP_TIMER_CONFIG_SWI_NUMBER -#define APP_TIMER_CONFIG_SWI_NUMBER 0 -#endif - -// -//========================================================== - -// - -// NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module -//========================================================== -#ifndef NRF_BALLOC_ENABLED -#define NRF_BALLOC_ENABLED 0 -#endif -// NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module. -//========================================================== -#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED -#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0 -#endif -// NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard. <0-255> - - -#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS -#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1 -#endif - -// NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard. <0-255> - - -#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS -#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1 -#endif - -// NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED - Enables basic checks in this module. - - -#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED -#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0 -#endif - -// NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED - Enables double memory free check in this module. - - -#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED -#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0 -#endif - -// NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED - Enables free memory corruption check in this module. - - -#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED -#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0 -#endif - -// NRF_BALLOC_CLI_CMDS - Enable CLI commands specific to the module - - -#ifndef NRF_BALLOC_CLI_CMDS -#define NRF_BALLOC_CLI_CMDS 0 -#endif - -// - -// - -// NRF_MEMOBJ_ENABLED - nrf_memobj - Linked memory allocator module - - -#ifndef NRF_MEMOBJ_ENABLED -#define NRF_MEMOBJ_ENABLED 0 -#endif - -// NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string. - - -#ifndef NRF_STRERROR_ENABLED -#define NRF_STRERROR_ENABLED 1 -#endif - -// app_button - buttons handling module - -//========================================================== -// BUTTON_ENABLED - Enables Button module - - -#ifndef BUTTON_ENABLED -#define BUTTON_ENABLED 1 -#endif - -// BUTTON_HIGH_ACCURACY_ENABLED - Enables GPIOTE high accuracy for buttons - - -#ifndef BUTTON_HIGH_ACCURACY_ENABLED -#define BUTTON_HIGH_ACCURACY_ENABLED 0 -#endif - -// -//========================================================== - -// -//========================================================== - -// nRF_Log - -//========================================================== -// nrf_log - Logger - -//========================================================== -// NRF_LOG_ENABLED - Logging module for nRF5 SDK -//========================================================== -#ifndef NRF_LOG_ENABLED -#define NRF_LOG_ENABLED 0 -#endif -// NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string -//========================================================== -#ifndef NRF_LOG_USES_COLORS -#define NRF_LOG_USES_COLORS 0 -#endif -// NRF_LOG_COLOR_DEFAULT - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_LOG_COLOR_DEFAULT -#define NRF_LOG_COLOR_DEFAULT 0 -#endif - -// NRF_LOG_ERROR_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_LOG_ERROR_COLOR -#define NRF_LOG_ERROR_COLOR 2 -#endif - -// NRF_LOG_WARNING_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_LOG_WARNING_COLOR -#define NRF_LOG_WARNING_COLOR 4 -#endif - -// - -// NRF_LOG_DEFAULT_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_LOG_DEFAULT_LEVEL -#define NRF_LOG_DEFAULT_LEVEL 3 -#endif - -// NRF_LOG_DEFERRED - Enable deffered logger. - - -// Log data is buffered and can be processed in idle. - -#ifndef NRF_LOG_DEFERRED -#define NRF_LOG_DEFERRED 1 -#endif - -// NRF_LOG_BUFSIZE - Size of the buffer for storing logs (in bytes). - - -// Must be power of 2 and multiple of 4. -// If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum. -// <128=> 128 -// <256=> 256 -// <512=> 512 -// <1024=> 1024 -// <2048=> 2048 -// <4096=> 4096 -// <8192=> 8192 -// <16384=> 16384 - -#ifndef NRF_LOG_BUFSIZE -#define NRF_LOG_BUFSIZE 1024 -#endif - -// NRF_LOG_ALLOW_OVERFLOW - Configures behavior when circular buffer is full. - - -// If set then oldest logs are overwritten. Otherwise a -// marker is injected informing about overflow. - -#ifndef NRF_LOG_ALLOW_OVERFLOW -#define NRF_LOG_ALLOW_OVERFLOW 1 -#endif - -// NRF_LOG_USES_TIMESTAMP - Enable timestamping - -// Function for getting the timestamp is provided by the user -//========================================================== -#ifndef NRF_LOG_USES_TIMESTAMP -#define NRF_LOG_USES_TIMESTAMP 0 -#endif -// NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) -#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY -#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768 -#endif - -// - -// NRF_LOG_FILTERS_ENABLED - Enable dynamic filtering of logs. - - -#ifndef NRF_LOG_FILTERS_ENABLED -#define NRF_LOG_FILTERS_ENABLED 0 -#endif - -// NRF_LOG_CLI_CMDS - Enable CLI commands for the module. - - -#ifndef NRF_LOG_CLI_CMDS -#define NRF_LOG_CLI_CMDS 0 -#endif - -// Log message pool - Configuration of log message pool - -//========================================================== -// NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. -// If a small value is set, then performance of logs processing -// is degraded because data is fragmented. Bigger value impacts -// RAM memory utilization. The size is set to fit a message with -// a timestamp and up to 2 arguments in a single memory object. - -#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE -#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20 -#endif - -// NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects -// If a small value is set, then it may lead to a deadlock -// in certain cases if backend has high latency and holds -// multiple messages for long time. Bigger value impacts -// RAM memory usage. - -#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT -#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8 -#endif - -// -//========================================================== - -// - -// nrf_log module configuration - -//========================================================== -// nrf_log in nRF_Core - -//========================================================== -// NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_MPU_CONFIG_LOG_ENABLED -#define NRF_MPU_CONFIG_LOG_ENABLED 0 -#endif -// NRF_MPU_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_MPU_CONFIG_LOG_LEVEL -#define NRF_MPU_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_MPU_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_MPU_CONFIG_INFO_COLOR -#define NRF_MPU_CONFIG_INFO_COLOR 0 -#endif - -// NRF_MPU_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_MPU_CONFIG_DEBUG_COLOR -#define NRF_MPU_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED -#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0 -#endif -// NRF_STACK_GUARD_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL -#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_STACK_GUARD_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR -#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0 -#endif - -// NRF_STACK_GUARD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR -#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED -#define TASK_MANAGER_CONFIG_LOG_ENABLED 0 -#endif -// TASK_MANAGER_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL -#define TASK_MANAGER_CONFIG_LOG_LEVEL 3 -#endif - -// TASK_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TASK_MANAGER_CONFIG_INFO_COLOR -#define TASK_MANAGER_CONFIG_INFO_COLOR 0 -#endif - -// TASK_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR -#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// -//========================================================== - -// nrf_log in nRF_Drivers - -//========================================================== -// CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef CLOCK_CONFIG_LOG_ENABLED -#define CLOCK_CONFIG_LOG_ENABLED 0 -#endif -// CLOCK_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef CLOCK_CONFIG_LOG_LEVEL -#define CLOCK_CONFIG_LOG_LEVEL 3 -#endif - -// CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef CLOCK_CONFIG_INFO_COLOR -#define CLOCK_CONFIG_INFO_COLOR 0 -#endif - -// CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef CLOCK_CONFIG_DEBUG_COLOR -#define CLOCK_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// COMP_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef COMP_CONFIG_LOG_ENABLED -#define COMP_CONFIG_LOG_ENABLED 0 -#endif -// COMP_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef COMP_CONFIG_LOG_LEVEL -#define COMP_CONFIG_LOG_LEVEL 3 -#endif - -// COMP_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef COMP_CONFIG_INFO_COLOR -#define COMP_CONFIG_INFO_COLOR 0 -#endif - -// COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef COMP_CONFIG_DEBUG_COLOR -#define COMP_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef GPIOTE_CONFIG_LOG_ENABLED -#define GPIOTE_CONFIG_LOG_ENABLED 0 -#endif -// GPIOTE_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef GPIOTE_CONFIG_LOG_LEVEL -#define GPIOTE_CONFIG_LOG_LEVEL 3 -#endif - -// GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef GPIOTE_CONFIG_INFO_COLOR -#define GPIOTE_CONFIG_INFO_COLOR 0 -#endif - -// GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef GPIOTE_CONFIG_DEBUG_COLOR -#define GPIOTE_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef LPCOMP_CONFIG_LOG_ENABLED -#define LPCOMP_CONFIG_LOG_ENABLED 0 -#endif -// LPCOMP_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef LPCOMP_CONFIG_LOG_LEVEL -#define LPCOMP_CONFIG_LOG_LEVEL 3 -#endif - -// LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef LPCOMP_CONFIG_INFO_COLOR -#define LPCOMP_CONFIG_INFO_COLOR 0 -#endif - -// LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef LPCOMP_CONFIG_DEBUG_COLOR -#define LPCOMP_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// PDM_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef PDM_CONFIG_LOG_ENABLED -#define PDM_CONFIG_LOG_ENABLED 0 -#endif -// PDM_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef PDM_CONFIG_LOG_LEVEL -#define PDM_CONFIG_LOG_LEVEL 3 -#endif - -// PDM_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef PDM_CONFIG_INFO_COLOR -#define PDM_CONFIG_INFO_COLOR 0 -#endif - -// PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef PDM_CONFIG_DEBUG_COLOR -#define PDM_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// PPI_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef PPI_CONFIG_LOG_ENABLED -#define PPI_CONFIG_LOG_ENABLED 0 -#endif -// PPI_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef PPI_CONFIG_LOG_LEVEL -#define PPI_CONFIG_LOG_LEVEL 3 -#endif - -// PPI_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef PPI_CONFIG_INFO_COLOR -#define PPI_CONFIG_INFO_COLOR 0 -#endif - -// PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef PPI_CONFIG_DEBUG_COLOR -#define PPI_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// PWM_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef PWM_CONFIG_LOG_ENABLED -#define PWM_CONFIG_LOG_ENABLED 0 -#endif -// PWM_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef PWM_CONFIG_LOG_LEVEL -#define PWM_CONFIG_LOG_LEVEL 3 -#endif - -// PWM_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef PWM_CONFIG_INFO_COLOR -#define PWM_CONFIG_INFO_COLOR 0 -#endif - -// PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef PWM_CONFIG_DEBUG_COLOR -#define PWM_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// QDEC_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef QDEC_CONFIG_LOG_ENABLED -#define QDEC_CONFIG_LOG_ENABLED 0 -#endif -// QDEC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef QDEC_CONFIG_LOG_LEVEL -#define QDEC_CONFIG_LOG_LEVEL 3 -#endif - -// QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef QDEC_CONFIG_INFO_COLOR -#define QDEC_CONFIG_INFO_COLOR 0 -#endif - -// QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef QDEC_CONFIG_DEBUG_COLOR -#define QDEC_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// RNG_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef RNG_CONFIG_LOG_ENABLED -#define RNG_CONFIG_LOG_ENABLED 0 -#endif -// RNG_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef RNG_CONFIG_LOG_LEVEL -#define RNG_CONFIG_LOG_LEVEL 3 -#endif - -// RNG_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef RNG_CONFIG_INFO_COLOR -#define RNG_CONFIG_INFO_COLOR 0 -#endif - -// RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef RNG_CONFIG_DEBUG_COLOR -#define RNG_CONFIG_DEBUG_COLOR 0 -#endif - -// RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED - Enables logging of random numbers. - - -#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED -#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0 -#endif - -// - -// RTC_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef RTC_CONFIG_LOG_ENABLED -#define RTC_CONFIG_LOG_ENABLED 0 -#endif -// RTC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef RTC_CONFIG_LOG_LEVEL -#define RTC_CONFIG_LOG_LEVEL 3 -#endif - -// RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef RTC_CONFIG_INFO_COLOR -#define RTC_CONFIG_INFO_COLOR 0 -#endif - -// RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef RTC_CONFIG_DEBUG_COLOR -#define RTC_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// SAADC_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef SAADC_CONFIG_LOG_ENABLED -#define SAADC_CONFIG_LOG_ENABLED 0 -#endif -// SAADC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef SAADC_CONFIG_LOG_LEVEL -#define SAADC_CONFIG_LOG_LEVEL 3 -#endif - -// SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SAADC_CONFIG_INFO_COLOR -#define SAADC_CONFIG_INFO_COLOR 0 -#endif - -// SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SAADC_CONFIG_DEBUG_COLOR -#define SAADC_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// SPIS_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef SPIS_CONFIG_LOG_ENABLED -#define SPIS_CONFIG_LOG_ENABLED 0 -#endif -// SPIS_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef SPIS_CONFIG_LOG_LEVEL -#define SPIS_CONFIG_LOG_LEVEL 3 -#endif - -// SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SPIS_CONFIG_INFO_COLOR -#define SPIS_CONFIG_INFO_COLOR 0 -#endif - -// SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SPIS_CONFIG_DEBUG_COLOR -#define SPIS_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// SPI_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef SPI_CONFIG_LOG_ENABLED -#define SPI_CONFIG_LOG_ENABLED 0 -#endif -// SPI_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef SPI_CONFIG_LOG_LEVEL -#define SPI_CONFIG_LOG_LEVEL 3 -#endif - -// SPI_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SPI_CONFIG_INFO_COLOR -#define SPI_CONFIG_INFO_COLOR 0 -#endif - -// SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SPI_CONFIG_DEBUG_COLOR -#define SPI_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef TIMER_CONFIG_LOG_ENABLED -#define TIMER_CONFIG_LOG_ENABLED 0 -#endif -// TIMER_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef TIMER_CONFIG_LOG_LEVEL -#define TIMER_CONFIG_LOG_LEVEL 3 -#endif - -// TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TIMER_CONFIG_INFO_COLOR -#define TIMER_CONFIG_INFO_COLOR 0 -#endif - -// TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TIMER_CONFIG_DEBUG_COLOR -#define TIMER_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// TWIS_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef TWIS_CONFIG_LOG_ENABLED -#define TWIS_CONFIG_LOG_ENABLED 0 -#endif -// TWIS_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef TWIS_CONFIG_LOG_LEVEL -#define TWIS_CONFIG_LOG_LEVEL 3 -#endif - -// TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TWIS_CONFIG_INFO_COLOR -#define TWIS_CONFIG_INFO_COLOR 0 -#endif - -// TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TWIS_CONFIG_DEBUG_COLOR -#define TWIS_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// TWI_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef TWI_CONFIG_LOG_ENABLED -#define TWI_CONFIG_LOG_ENABLED 0 -#endif -// TWI_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef TWI_CONFIG_LOG_LEVEL -#define TWI_CONFIG_LOG_LEVEL 3 -#endif - -// TWI_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TWI_CONFIG_INFO_COLOR -#define TWI_CONFIG_INFO_COLOR 0 -#endif - -// TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TWI_CONFIG_DEBUG_COLOR -#define TWI_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// UART_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef UART_CONFIG_LOG_ENABLED -#define UART_CONFIG_LOG_ENABLED 0 -#endif -// UART_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef UART_CONFIG_LOG_LEVEL -#define UART_CONFIG_LOG_LEVEL 3 -#endif - -// UART_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef UART_CONFIG_INFO_COLOR -#define UART_CONFIG_INFO_COLOR 0 -#endif - -// UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef UART_CONFIG_DEBUG_COLOR -#define UART_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// USBD_CONFIG_LOG_ENABLED - Enable logging in the module -//========================================================== -#ifndef USBD_CONFIG_LOG_ENABLED -#define USBD_CONFIG_LOG_ENABLED 0 -#endif -// USBD_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef USBD_CONFIG_LOG_LEVEL -#define USBD_CONFIG_LOG_LEVEL 3 -#endif - -// USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef USBD_CONFIG_INFO_COLOR -#define USBD_CONFIG_INFO_COLOR 0 -#endif - -// USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef USBD_CONFIG_DEBUG_COLOR -#define USBD_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// WDT_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef WDT_CONFIG_LOG_ENABLED -#define WDT_CONFIG_LOG_ENABLED 0 -#endif -// WDT_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef WDT_CONFIG_LOG_LEVEL -#define WDT_CONFIG_LOG_LEVEL 3 -#endif - -// WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef WDT_CONFIG_INFO_COLOR -#define WDT_CONFIG_INFO_COLOR 0 -#endif - -// WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef WDT_CONFIG_DEBUG_COLOR -#define WDT_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// -//========================================================== - -// nrf_log in nRF_Libraries - -//========================================================== -// APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef APP_TIMER_CONFIG_LOG_ENABLED -#define APP_TIMER_CONFIG_LOG_ENABLED 0 -#endif -// APP_TIMER_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef APP_TIMER_CONFIG_LOG_LEVEL -#define APP_TIMER_CONFIG_LOG_LEVEL 3 -#endif - -// APP_TIMER_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. - - -// If module generates a lot of logs, initial log level can -// be decreased to prevent flooding. Severity level can be -// increased on instance basis. -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL -#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3 -#endif - -// APP_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_TIMER_CONFIG_INFO_COLOR -#define APP_TIMER_CONFIG_INFO_COLOR 0 -#endif - -// APP_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_TIMER_CONFIG_DEBUG_COLOR -#define APP_TIMER_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED -#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0 -#endif -// APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL -#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3 -#endif - -// APP_USBD_CDC_ACM_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR -#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0 -#endif - -// APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR -#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED -#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0 -#endif -// APP_USBD_DUMMY_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL -#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3 -#endif - -// APP_USBD_DUMMY_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR -#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0 -#endif - -// APP_USBD_DUMMY_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR -#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED -#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0 -#endif -// APP_USBD_MSC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL -#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3 -#endif - -// APP_USBD_MSC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR -#define APP_USBD_MSC_CONFIG_INFO_COLOR 0 -#endif - -// APP_USBD_MSC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR -#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED -#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0 -#endif -// APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL -#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3 -#endif - -// APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR -#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0 -#endif - -// APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR -#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED -#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0 -#endif -// NRF_ATFIFO_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL -#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL -#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3 -#endif - -// NRF_ATFIFO_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR -#define NRF_ATFIFO_CONFIG_INFO_COLOR 0 -#endif - -// NRF_ATFIFO_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR -#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED -#define NRF_BALLOC_CONFIG_LOG_ENABLED 0 -#endif -// NRF_BALLOC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL -#define NRF_BALLOC_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. - - -// If module generates a lot of logs, initial log level can -// be decreased to prevent flooding. Severity level can be -// increased on instance basis. -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL -#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3 -#endif - -// NRF_BALLOC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_BALLOC_CONFIG_INFO_COLOR -#define NRF_BALLOC_CONFIG_INFO_COLOR 0 -#endif - -// NRF_BALLOC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR -#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED -#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0 -#endif -// NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL -#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_CLI_BLE_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR -#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0 -#endif - -// NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR -#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED -#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0 -#endif -// NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL -#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR -#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0 -#endif - -// NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR -#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED -#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0 -#endif -// NRF_CLI_UART_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL -#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_CLI_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR -#define NRF_CLI_UART_CONFIG_INFO_COLOR 0 -#endif - -// NRF_CLI_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR -#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED -#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0 -#endif -// NRF_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL -#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR -#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0 -#endif - -// NRF_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR -#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED -#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0 -#endif -// NRF_MEMOBJ_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL -#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_MEMOBJ_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR -#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0 -#endif - -// NRF_MEMOBJ_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR -#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED -#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0 -#endif -// NRF_PWR_MGMT_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL -#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_PWR_MGMT_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR -#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0 -#endif - -// NRF_PWR_MGMT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR -#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED -#define NRF_QUEUE_CONFIG_LOG_ENABLED 0 -#endif -// NRF_QUEUE_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL -#define NRF_QUEUE_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL -#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3 -#endif - -// NRF_QUEUE_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_QUEUE_CONFIG_INFO_COLOR -#define NRF_QUEUE_CONFIG_INFO_COLOR 0 -#endif - -// NRF_QUEUE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR -#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module. -//========================================================== -#ifndef NRF_SDH_ANT_LOG_ENABLED -#define NRF_SDH_ANT_LOG_ENABLED 0 -#endif -// NRF_SDH_ANT_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_SDH_ANT_LOG_LEVEL -#define NRF_SDH_ANT_LOG_LEVEL 3 -#endif - -// NRF_SDH_ANT_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_ANT_INFO_COLOR -#define NRF_SDH_ANT_INFO_COLOR 0 -#endif - -// NRF_SDH_ANT_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_ANT_DEBUG_COLOR -#define NRF_SDH_ANT_DEBUG_COLOR 0 -#endif - -// - -// NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module. -//========================================================== -#ifndef NRF_SDH_BLE_LOG_ENABLED -#define NRF_SDH_BLE_LOG_ENABLED 0 -#endif -// NRF_SDH_BLE_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_SDH_BLE_LOG_LEVEL -#define NRF_SDH_BLE_LOG_LEVEL 3 -#endif - -// NRF_SDH_BLE_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_BLE_INFO_COLOR -#define NRF_SDH_BLE_INFO_COLOR 0 -#endif - -// NRF_SDH_BLE_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_BLE_DEBUG_COLOR -#define NRF_SDH_BLE_DEBUG_COLOR 0 -#endif - -// - -// NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module. -//========================================================== -#ifndef NRF_SDH_LOG_ENABLED -#define NRF_SDH_LOG_ENABLED 0 -#endif -// NRF_SDH_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_SDH_LOG_LEVEL -#define NRF_SDH_LOG_LEVEL 3 -#endif - -// NRF_SDH_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_INFO_COLOR -#define NRF_SDH_INFO_COLOR 0 -#endif - -// NRF_SDH_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_DEBUG_COLOR -#define NRF_SDH_DEBUG_COLOR 0 -#endif - -// - -// NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module. -//========================================================== -#ifndef NRF_SDH_SOC_LOG_ENABLED -#define NRF_SDH_SOC_LOG_ENABLED 0 -#endif -// NRF_SDH_SOC_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_SDH_SOC_LOG_LEVEL -#define NRF_SDH_SOC_LOG_LEVEL 3 -#endif - -// NRF_SDH_SOC_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_SOC_INFO_COLOR -#define NRF_SDH_SOC_INFO_COLOR 0 -#endif - -// NRF_SDH_SOC_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_SOC_DEBUG_COLOR -#define NRF_SDH_SOC_DEBUG_COLOR 0 -#endif - -// - -// NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED -#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0 -#endif -// NRF_SORTLIST_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL -#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_SORTLIST_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR -#define NRF_SORTLIST_CONFIG_INFO_COLOR 0 -#endif - -// NRF_SORTLIST_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR -#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED -#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0 -#endif -// NRF_TWI_SENSOR_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL -#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_TWI_SENSOR_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR -#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0 -#endif - -// NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR -#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// -//========================================================== - -// nrf_log in nRF_Serialization - -//========================================================== -// SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED -#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0 -#endif -// SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL -#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3 -#endif - -// SER_HAL_TRANSPORT_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR -#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0 -#endif - -// SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR -#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// -//========================================================== - -// -//========================================================== - -// -//========================================================== - -// -//========================================================== - -// <<< end of configuration section >>> -#endif //SDK_CONFIG_H - diff --git a/porting/examples/freertos_nrf5_sdk/pca10056/blank/armgcc/Makefile b/porting/examples/freertos_nrf5_sdk/pca10056/blank/armgcc/Makefile deleted file mode 100644 index f0b78153f..000000000 --- a/porting/examples/freertos_nrf5_sdk/pca10056/blank/armgcc/Makefile +++ /dev/null @@ -1,184 +0,0 @@ -PROJECT_NAME := freertos_FreeRTOS_pca10056 -TARGETS := nrf52840_xxaa -OUTPUT_DIRECTORY := _build - -PROJ_DIR := ../../.. -SDK_ROOT ?= $(PROJ_DIR)/nrf5_sdk - -$(OUTPUT_DIRECTORY)/nrf52840_xxaa.out: \ - LINKER_SCRIPT := nimble_FreeRTOS_gcc_nrf52.ld - -# Source files common to all targets -SRC_FILES += \ - $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52840.S \ - $(SDK_ROOT)/components/boards/boards.c \ - $(SDK_ROOT)/external/freertos/source/croutine.c \ - $(SDK_ROOT)/external/freertos/source/event_groups.c \ - $(SDK_ROOT)/external/freertos/source/portable/MemMang/heap_1.c \ - $(SDK_ROOT)/external/freertos/source/list.c \ - $(SDK_ROOT)/external/freertos/portable/GCC/nrf52/port.c \ - $(SDK_ROOT)/external/freertos/portable/CMSIS/nrf52/port_cmsis.c \ - $(SDK_ROOT)/external/freertos/portable/CMSIS/nrf52/port_cmsis_systick.c \ - $(SDK_ROOT)/external/freertos/source/queue.c \ - $(SDK_ROOT)/external/freertos/source/stream_buffer.c \ - $(SDK_ROOT)/external/freertos/source/tasks.c \ - $(SDK_ROOT)/external/freertos/source/timers.c \ - $(SDK_ROOT)/components/libraries/button/app_button.c \ - $(SDK_ROOT)/components/libraries/util/app_error.c \ - $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \ - $(SDK_ROOT)/components/libraries/util/app_error_weak.c \ - $(SDK_ROOT)/components/libraries/timer/app_timer_freertos.c \ - $(SDK_ROOT)/components/libraries/util/app_util_platform.c \ - $(SDK_ROOT)/components/libraries/util/nrf_assert.c \ - $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \ - $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_clock.c \ - $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd/nrf_nvic.c \ - $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd/nrf_soc.c \ - $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_clock.c \ - $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \ - $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_power_clock.c \ - $(SDK_ROOT)/components/libraries/bsp/bsp.c \ - $(PROJ_DIR)/main.c \ - $(PROJ_DIR)/ble.c \ - $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52840.c \ - -# Include folders common to all targets -INC_FOLDERS += \ - $(PROJ_DIR)/config \ - $(SDK_ROOT)/components \ - $(SDK_ROOT)/modules/nrfx/mdk \ - $(SDK_ROOT)/components/libraries/experimental_log \ - $(PROJ_DIR) \ - $(SDK_ROOT)/components/libraries/timer \ - $(SDK_ROOT)/components/libraries/strerror \ - $(SDK_ROOT)/components/toolchain/cmsis/include \ - $(SDK_ROOT)/external/freertos/source/include \ - $(SDK_ROOT)/external/freertos/config \ - $(SDK_ROOT)/components/libraries/util \ - ../config \ - $(SDK_ROOT)/components/libraries/balloc \ - $(SDK_ROOT)/modules/nrfx/hal \ - $(SDK_ROOT)/components/libraries/bsp \ - $(SDK_ROOT)/components/libraries/button \ - $(SDK_ROOT)/modules/nrfx \ - $(SDK_ROOT)/components/libraries/experimental_section_vars \ - $(SDK_ROOT)/integration/nrfx/legacy \ - $(SDK_ROOT)/external/freertos/portable/CMSIS/nrf52 \ - $(SDK_ROOT)/components/libraries/experimental_log/src \ - $(SDK_ROOT)/integration/nrfx \ - $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd \ - $(SDK_ROOT)/components/boards \ - $(SDK_ROOT)/components/libraries/experimental_memobj \ - $(SDK_ROOT)/external/freertos/portable/GCC/nrf52 \ - $(SDK_ROOT)/modules/nrfx/drivers/include \ - -# Libraries common to all targets -LIB_FILES += \ - -# Optimization flags -OPT = -Og -g3 -# Uncomment the line below to enable link time optimization -#OPT += -flto - -# C flags common to all targets -CFLAGS += $(OPT) -CFLAGS += -DBOARD_PCA10056 -CFLAGS += -DCONFIG_GPIO_AS_PINRESET -CFLAGS += -DFLOAT_ABI_HARD -CFLAGS += -DFREERTOS -CFLAGS += -DNRF52840_XXAA -CFLAGS += -mcpu=cortex-m4 -CFLAGS += -mthumb -mabi=aapcs -CFLAGS += -Wall -Werror -CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 -# keep every function in a separate section, this allows linker to discard unused ones -CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing -CFLAGS += -fno-builtin -fshort-enums - -# C++ flags common to all targets -CXXFLAGS += $(OPT) - -# Assembler flags common to all targets -ASMFLAGS += -g3 -ASMFLAGS += -mcpu=cortex-m4 -ASMFLAGS += -mthumb -mabi=aapcs -ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 -ASMFLAGS += -DBOARD_PCA10056 -ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET -ASMFLAGS += -DFLOAT_ABI_HARD -ASMFLAGS += -DFREERTOS -ASMFLAGS += -DNRF52840_XXAA - -# Linker flags -LDFLAGS += $(OPT) -LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT) -LDFLAGS += -mcpu=cortex-m4 -LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 -# let linker dump unused sections -LDFLAGS += -Wl,--gc-sections -# use newlib in nano version -LDFLAGS += --specs=nano.specs - -nrf52840_xxaa: CFLAGS += -D__HEAP_SIZE=8192 -nrf52840_xxaa: CFLAGS += -D__STACK_SIZE=8192 -nrf52840_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192 -nrf52840_xxaa: ASMFLAGS += -D__STACK_SIZE=8192 - -# Add standard libraries at the very end of the linker input, after all objects -# that may need symbols provided by these libraries. -LIB_FILES += -lc -lnosys -lm - -# Configure NimBLE variables -NIMBLE_ROOT := $(PROJ_DIR)/../../.. -NIMBLE_CFG_CONTROLLER := 1 -NIMBLE_CFG_TINYCRYPT := 1 -include $(NIMBLE_ROOT)/porting/nimble/Makefile.defs - -# Add NimBLE CFLAGS -CFLAGS += $(NIMBLE_CFLAGS) - -# Add NPL for FreeRTOS, UART HCI transport for nRF5 SDK and all NimBLE sources -SRC_FILES += \ - $(NIMBLE_ROOT)/porting/npl/freertos/src/npl_os_freertos.c \ - $(NIMBLE_SRC) \ - -# Add NPL for FreeRTOS and all NimBLE directories to include paths -INC_FOLDERS += \ - $(PROJ_DIR)/include \ - $(NIMBLE_ROOT)/porting/npl/freertos/include \ - $(NIMBLE_INCLUDE) \ - -.PHONY: default help - -# Default target - first one defined -default: nrf52840_xxaa - -# Print all targets that can be built -help: - @echo following targets are available: - @echo nrf52840_xxaa - @echo sdk_config - starting external tool for editing sdk_config.h - @echo flash - flashing binary - -TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc - - -include $(TEMPLATE_PATH)/Makefile.common - -$(foreach target, $(TARGETS), $(call define_target, $(target))) - -.PHONY: flash erase - -# Flash the program -flash: $(OUTPUT_DIRECTORY)/nrf52840_xxaa.hex - @echo Flashing: $< - nrfjprog -f nrf52 --program $< --sectorerase - nrfjprog -f nrf52 --reset - -erase: - nrfjprog -f nrf52 --eraseall - -SDK_CONFIG_FILE := ../config/sdk_config.h -CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar -sdk_config: - java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE) diff --git a/porting/examples/freertos_nrf5_sdk/pca10056/blank/armgcc/nimble_FreeRTOS_gcc_nrf52.ld b/porting/examples/freertos_nrf5_sdk/pca10056/blank/armgcc/nimble_FreeRTOS_gcc_nrf52.ld deleted file mode 100644 index 8eec92367..000000000 --- a/porting/examples/freertos_nrf5_sdk/pca10056/blank/armgcc/nimble_FreeRTOS_gcc_nrf52.ld +++ /dev/null @@ -1,51 +0,0 @@ -/* Linker script to configure memory regions. */ - -SEARCH_DIR(.) -GROUP(-lgcc -lc -lnosys) - -MEMORY -{ - FLASH (rx) : ORIGIN = 0x0, LENGTH = 0x100000 - RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x40000 -} - -SECTIONS -{ -} - -SECTIONS -{ - . = ALIGN(4); - .mem_section_dummy_ram : - { - } - .log_dynamic_data : - { - PROVIDE(__start_log_dynamic_data = .); - KEEP(*(SORT(.log_dynamic_data*))) - PROVIDE(__stop_log_dynamic_data = .); - } > RAM - -} INSERT AFTER .data; - -SECTIONS -{ - .mem_section_dummy_rom : - { - } - .log_const_data : - { - PROVIDE(__start_log_const_data = .); - KEEP(*(SORT(.log_const_data*))) - PROVIDE(__stop_log_const_data = .); - } > FLASH - .nrf_balloc : - { - PROVIDE(__start_nrf_balloc = .); - KEEP(*(.nrf_balloc)) - PROVIDE(__stop_nrf_balloc = .); - } > FLASH - -} INSERT AFTER .text - -INCLUDE "nrf_common.ld" diff --git a/porting/examples/freertos_nrf5_sdk/pca10056/blank/config/sdk_config.h b/porting/examples/freertos_nrf5_sdk/pca10056/blank/config/sdk_config.h deleted file mode 100644 index d37ed6f25..000000000 --- a/porting/examples/freertos_nrf5_sdk/pca10056/blank/config/sdk_config.h +++ /dev/null @@ -1,2924 +0,0 @@ -/** - * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA - * - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form, except as embedded into a Nordic - * Semiconductor ASA integrated circuit in a product or a software update for - * such product, must reproduce the above copyright notice, this list of - * conditions and the following disclaimer in the documentation and/or other - * materials provided with the distribution. - * - * 3. Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * 4. This software, with or without modification, must only be used with a - * Nordic Semiconductor ASA integrated circuit. - * - * 5. Any software provided in binary form under this license must not be reverse - * engineered, decompiled, modified and/or disassembled. - * - * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - */ - - - -#ifndef SDK_CONFIG_H -#define SDK_CONFIG_H -// <<< Use Configuration Wizard in Context Menu >>>\n -#ifdef USE_APP_CONFIG -#include "app_config.h" -#endif -// nRF_Drivers - -//========================================================== -// CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver - legacy layer -//========================================================== -#ifndef CLOCK_ENABLED -#define CLOCK_ENABLED 1 -#endif -// CLOCK_CONFIG_LF_SRC - LF Clock Source - -// <0=> RC -// <1=> XTAL -// <2=> Synth - -#ifndef CLOCK_CONFIG_LF_SRC -#define CLOCK_CONFIG_LF_SRC 1 -#endif - -// CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority - - -// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 - -#ifndef CLOCK_CONFIG_IRQ_PRIORITY -#define CLOCK_CONFIG_IRQ_PRIORITY 7 -#endif - -// - -// GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer -//========================================================== -#ifndef GPIOTE_ENABLED -#define GPIOTE_ENABLED 1 -#endif -// GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins -#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS -#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4 -#endif - -// GPIOTE_CONFIG_IRQ_PRIORITY - Interrupt priority - - -// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 - -#ifndef GPIOTE_CONFIG_IRQ_PRIORITY -#define GPIOTE_CONFIG_IRQ_PRIORITY 7 -#endif - -// - -// NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver -//========================================================== -#ifndef NRFX_CLOCK_ENABLED -#define NRFX_CLOCK_ENABLED 1 -#endif -// NRFX_CLOCK_CONFIG_LF_SRC - LF Clock Source - -// <0=> RC -// <1=> XTAL -// <2=> Synth - -#ifndef NRFX_CLOCK_CONFIG_LF_SRC -#define NRFX_CLOCK_CONFIG_LF_SRC 1 -#endif - -// NRFX_CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority - -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 - -#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY -#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7 -#endif - -// NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED -#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0 -#endif -// NRFX_CLOCK_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL -#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3 -#endif - -// NRFX_CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR -#define NRFX_CLOCK_CONFIG_INFO_COLOR 0 -#endif - -// NRFX_CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR -#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// - -// NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver -//========================================================== -#ifndef NRFX_GPIOTE_ENABLED -#define NRFX_GPIOTE_ENABLED 1 -#endif -// NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins -#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS -#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1 -#endif - -// NRFX_GPIOTE_CONFIG_IRQ_PRIORITY - Interrupt priority - -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 - -#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY -#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7 -#endif - -// NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED -#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0 -#endif -// NRFX_GPIOTE_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL -#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3 -#endif - -// NRFX_GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR -#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0 -#endif - -// NRFX_GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR -#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// - -// -//========================================================== - -// nRF_Libraries - -//========================================================== -// APP_TIMER_ENABLED - app_timer - Application timer functionality -//========================================================== -#ifndef APP_TIMER_ENABLED -#define APP_TIMER_ENABLED 1 -#endif -// APP_TIMER_CONFIG_RTC_FREQUENCY - Configure RTC prescaler. - -// <0=> 32768 Hz -// <1=> 16384 Hz -// <3=> 8192 Hz -// <7=> 4096 Hz -// <15=> 2048 Hz -// <31=> 1024 Hz - -#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY -#define APP_TIMER_CONFIG_RTC_FREQUENCY 0 -#endif - -// APP_TIMER_CONFIG_IRQ_PRIORITY - Interrupt priority - - -// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice -// <0=> 0 (highest) -// <1=> 1 -// <2=> 2 -// <3=> 3 -// <4=> 4 -// <5=> 5 -// <6=> 6 -// <7=> 7 - -#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY -#define APP_TIMER_CONFIG_IRQ_PRIORITY 7 -#endif - -// APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. -// Size of the queue depends on how many timers are used -// in the system, how often timers are started and overall -// system latency. If queue size is too small app_timer calls -// will fail. - -#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE -#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10 -#endif - -// APP_TIMER_CONFIG_USE_SCHEDULER - Enable scheduling app_timer events to app_scheduler - - -#ifndef APP_TIMER_CONFIG_USE_SCHEDULER -#define APP_TIMER_CONFIG_USE_SCHEDULER 0 -#endif - -// APP_TIMER_KEEPS_RTC_ACTIVE - Enable RTC always on - - -// If option is enabled RTC is kept running even if there is no active timers. -// This option can be used when app_timer is used for timestamping. - -#ifndef APP_TIMER_KEEPS_RTC_ACTIVE -#define APP_TIMER_KEEPS_RTC_ACTIVE 0 -#endif - -// App Timer Legacy configuration - Legacy configuration. - -//========================================================== -// APP_TIMER_WITH_PROFILER - Enable app_timer profiling - - -#ifndef APP_TIMER_WITH_PROFILER -#define APP_TIMER_WITH_PROFILER 0 -#endif - -// APP_TIMER_CONFIG_SWI_NUMBER - Configure SWI instance used. - - -#ifndef APP_TIMER_CONFIG_SWI_NUMBER -#define APP_TIMER_CONFIG_SWI_NUMBER 0 -#endif - -// -//========================================================== - -// - -// NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module -//========================================================== -#ifndef NRF_BALLOC_ENABLED -#define NRF_BALLOC_ENABLED 0 -#endif -// NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module. -//========================================================== -#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED -#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0 -#endif -// NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard. <0-255> - - -#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS -#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1 -#endif - -// NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard. <0-255> - - -#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS -#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1 -#endif - -// NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED - Enables basic checks in this module. - - -#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED -#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0 -#endif - -// NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED - Enables double memory free check in this module. - - -#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED -#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0 -#endif - -// NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED - Enables free memory corruption check in this module. - - -#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED -#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0 -#endif - -// NRF_BALLOC_CLI_CMDS - Enable CLI commands specific to the module - - -#ifndef NRF_BALLOC_CLI_CMDS -#define NRF_BALLOC_CLI_CMDS 0 -#endif - -// - -// - -// NRF_MEMOBJ_ENABLED - nrf_memobj - Linked memory allocator module - - -#ifndef NRF_MEMOBJ_ENABLED -#define NRF_MEMOBJ_ENABLED 0 -#endif - -// NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string. - - -#ifndef NRF_STRERROR_ENABLED -#define NRF_STRERROR_ENABLED 1 -#endif - -// app_button - buttons handling module - -//========================================================== -// BUTTON_ENABLED - Enables Button module - - -#ifndef BUTTON_ENABLED -#define BUTTON_ENABLED 1 -#endif - -// BUTTON_HIGH_ACCURACY_ENABLED - Enables GPIOTE high accuracy for buttons - - -#ifndef BUTTON_HIGH_ACCURACY_ENABLED -#define BUTTON_HIGH_ACCURACY_ENABLED 0 -#endif - -// -//========================================================== - -// -//========================================================== - -// nRF_Log - -//========================================================== -// nrf_log - Logger - -//========================================================== -// NRF_LOG_ENABLED - Logging module for nRF5 SDK -//========================================================== -#ifndef NRF_LOG_ENABLED -#define NRF_LOG_ENABLED 0 -#endif -// NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string -//========================================================== -#ifndef NRF_LOG_USES_COLORS -#define NRF_LOG_USES_COLORS 0 -#endif -// NRF_LOG_COLOR_DEFAULT - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_LOG_COLOR_DEFAULT -#define NRF_LOG_COLOR_DEFAULT 0 -#endif - -// NRF_LOG_ERROR_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_LOG_ERROR_COLOR -#define NRF_LOG_ERROR_COLOR 2 -#endif - -// NRF_LOG_WARNING_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_LOG_WARNING_COLOR -#define NRF_LOG_WARNING_COLOR 4 -#endif - -// - -// NRF_LOG_DEFAULT_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_LOG_DEFAULT_LEVEL -#define NRF_LOG_DEFAULT_LEVEL 3 -#endif - -// NRF_LOG_DEFERRED - Enable deffered logger. - - -// Log data is buffered and can be processed in idle. - -#ifndef NRF_LOG_DEFERRED -#define NRF_LOG_DEFERRED 1 -#endif - -// NRF_LOG_BUFSIZE - Size of the buffer for storing logs (in bytes). - - -// Must be power of 2 and multiple of 4. -// If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum. -// <128=> 128 -// <256=> 256 -// <512=> 512 -// <1024=> 1024 -// <2048=> 2048 -// <4096=> 4096 -// <8192=> 8192 -// <16384=> 16384 - -#ifndef NRF_LOG_BUFSIZE -#define NRF_LOG_BUFSIZE 1024 -#endif - -// NRF_LOG_ALLOW_OVERFLOW - Configures behavior when circular buffer is full. - - -// If set then oldest logs are overwritten. Otherwise a -// marker is injected informing about overflow. - -#ifndef NRF_LOG_ALLOW_OVERFLOW -#define NRF_LOG_ALLOW_OVERFLOW 1 -#endif - -// NRF_LOG_USES_TIMESTAMP - Enable timestamping - -// Function for getting the timestamp is provided by the user -//========================================================== -#ifndef NRF_LOG_USES_TIMESTAMP -#define NRF_LOG_USES_TIMESTAMP 0 -#endif -// NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) -#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY -#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768 -#endif - -// - -// NRF_LOG_FILTERS_ENABLED - Enable dynamic filtering of logs. - - -#ifndef NRF_LOG_FILTERS_ENABLED -#define NRF_LOG_FILTERS_ENABLED 0 -#endif - -// NRF_LOG_CLI_CMDS - Enable CLI commands for the module. - - -#ifndef NRF_LOG_CLI_CMDS -#define NRF_LOG_CLI_CMDS 0 -#endif - -// Log message pool - Configuration of log message pool - -//========================================================== -// NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. -// If a small value is set, then performance of logs processing -// is degraded because data is fragmented. Bigger value impacts -// RAM memory utilization. The size is set to fit a message with -// a timestamp and up to 2 arguments in a single memory object. - -#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE -#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20 -#endif - -// NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects -// If a small value is set, then it may lead to a deadlock -// in certain cases if backend has high latency and holds -// multiple messages for long time. Bigger value impacts -// RAM memory usage. - -#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT -#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8 -#endif - -// -//========================================================== - -// - -// nrf_log module configuration - -//========================================================== -// nrf_log in nRF_Core - -//========================================================== -// NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_MPU_CONFIG_LOG_ENABLED -#define NRF_MPU_CONFIG_LOG_ENABLED 0 -#endif -// NRF_MPU_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_MPU_CONFIG_LOG_LEVEL -#define NRF_MPU_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_MPU_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_MPU_CONFIG_INFO_COLOR -#define NRF_MPU_CONFIG_INFO_COLOR 0 -#endif - -// NRF_MPU_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_MPU_CONFIG_DEBUG_COLOR -#define NRF_MPU_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED -#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0 -#endif -// NRF_STACK_GUARD_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL -#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_STACK_GUARD_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR -#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0 -#endif - -// NRF_STACK_GUARD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR -#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED -#define TASK_MANAGER_CONFIG_LOG_ENABLED 0 -#endif -// TASK_MANAGER_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL -#define TASK_MANAGER_CONFIG_LOG_LEVEL 3 -#endif - -// TASK_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TASK_MANAGER_CONFIG_INFO_COLOR -#define TASK_MANAGER_CONFIG_INFO_COLOR 0 -#endif - -// TASK_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR -#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// -//========================================================== - -// nrf_log in nRF_Drivers - -//========================================================== -// CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef CLOCK_CONFIG_LOG_ENABLED -#define CLOCK_CONFIG_LOG_ENABLED 0 -#endif -// CLOCK_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef CLOCK_CONFIG_LOG_LEVEL -#define CLOCK_CONFIG_LOG_LEVEL 3 -#endif - -// CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef CLOCK_CONFIG_INFO_COLOR -#define CLOCK_CONFIG_INFO_COLOR 0 -#endif - -// CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef CLOCK_CONFIG_DEBUG_COLOR -#define CLOCK_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// COMP_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef COMP_CONFIG_LOG_ENABLED -#define COMP_CONFIG_LOG_ENABLED 0 -#endif -// COMP_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef COMP_CONFIG_LOG_LEVEL -#define COMP_CONFIG_LOG_LEVEL 3 -#endif - -// COMP_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef COMP_CONFIG_INFO_COLOR -#define COMP_CONFIG_INFO_COLOR 0 -#endif - -// COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef COMP_CONFIG_DEBUG_COLOR -#define COMP_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef GPIOTE_CONFIG_LOG_ENABLED -#define GPIOTE_CONFIG_LOG_ENABLED 0 -#endif -// GPIOTE_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef GPIOTE_CONFIG_LOG_LEVEL -#define GPIOTE_CONFIG_LOG_LEVEL 3 -#endif - -// GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef GPIOTE_CONFIG_INFO_COLOR -#define GPIOTE_CONFIG_INFO_COLOR 0 -#endif - -// GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef GPIOTE_CONFIG_DEBUG_COLOR -#define GPIOTE_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef LPCOMP_CONFIG_LOG_ENABLED -#define LPCOMP_CONFIG_LOG_ENABLED 0 -#endif -// LPCOMP_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef LPCOMP_CONFIG_LOG_LEVEL -#define LPCOMP_CONFIG_LOG_LEVEL 3 -#endif - -// LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef LPCOMP_CONFIG_INFO_COLOR -#define LPCOMP_CONFIG_INFO_COLOR 0 -#endif - -// LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef LPCOMP_CONFIG_DEBUG_COLOR -#define LPCOMP_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// PDM_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef PDM_CONFIG_LOG_ENABLED -#define PDM_CONFIG_LOG_ENABLED 0 -#endif -// PDM_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef PDM_CONFIG_LOG_LEVEL -#define PDM_CONFIG_LOG_LEVEL 3 -#endif - -// PDM_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef PDM_CONFIG_INFO_COLOR -#define PDM_CONFIG_INFO_COLOR 0 -#endif - -// PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef PDM_CONFIG_DEBUG_COLOR -#define PDM_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// PPI_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef PPI_CONFIG_LOG_ENABLED -#define PPI_CONFIG_LOG_ENABLED 0 -#endif -// PPI_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef PPI_CONFIG_LOG_LEVEL -#define PPI_CONFIG_LOG_LEVEL 3 -#endif - -// PPI_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef PPI_CONFIG_INFO_COLOR -#define PPI_CONFIG_INFO_COLOR 0 -#endif - -// PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef PPI_CONFIG_DEBUG_COLOR -#define PPI_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// PWM_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef PWM_CONFIG_LOG_ENABLED -#define PWM_CONFIG_LOG_ENABLED 0 -#endif -// PWM_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef PWM_CONFIG_LOG_LEVEL -#define PWM_CONFIG_LOG_LEVEL 3 -#endif - -// PWM_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef PWM_CONFIG_INFO_COLOR -#define PWM_CONFIG_INFO_COLOR 0 -#endif - -// PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef PWM_CONFIG_DEBUG_COLOR -#define PWM_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// QDEC_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef QDEC_CONFIG_LOG_ENABLED -#define QDEC_CONFIG_LOG_ENABLED 0 -#endif -// QDEC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef QDEC_CONFIG_LOG_LEVEL -#define QDEC_CONFIG_LOG_LEVEL 3 -#endif - -// QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef QDEC_CONFIG_INFO_COLOR -#define QDEC_CONFIG_INFO_COLOR 0 -#endif - -// QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef QDEC_CONFIG_DEBUG_COLOR -#define QDEC_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// RNG_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef RNG_CONFIG_LOG_ENABLED -#define RNG_CONFIG_LOG_ENABLED 0 -#endif -// RNG_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef RNG_CONFIG_LOG_LEVEL -#define RNG_CONFIG_LOG_LEVEL 3 -#endif - -// RNG_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef RNG_CONFIG_INFO_COLOR -#define RNG_CONFIG_INFO_COLOR 0 -#endif - -// RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef RNG_CONFIG_DEBUG_COLOR -#define RNG_CONFIG_DEBUG_COLOR 0 -#endif - -// RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED - Enables logging of random numbers. - - -#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED -#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0 -#endif - -// - -// RTC_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef RTC_CONFIG_LOG_ENABLED -#define RTC_CONFIG_LOG_ENABLED 0 -#endif -// RTC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef RTC_CONFIG_LOG_LEVEL -#define RTC_CONFIG_LOG_LEVEL 3 -#endif - -// RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef RTC_CONFIG_INFO_COLOR -#define RTC_CONFIG_INFO_COLOR 0 -#endif - -// RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef RTC_CONFIG_DEBUG_COLOR -#define RTC_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// SAADC_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef SAADC_CONFIG_LOG_ENABLED -#define SAADC_CONFIG_LOG_ENABLED 0 -#endif -// SAADC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef SAADC_CONFIG_LOG_LEVEL -#define SAADC_CONFIG_LOG_LEVEL 3 -#endif - -// SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SAADC_CONFIG_INFO_COLOR -#define SAADC_CONFIG_INFO_COLOR 0 -#endif - -// SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SAADC_CONFIG_DEBUG_COLOR -#define SAADC_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// SPIS_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef SPIS_CONFIG_LOG_ENABLED -#define SPIS_CONFIG_LOG_ENABLED 0 -#endif -// SPIS_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef SPIS_CONFIG_LOG_LEVEL -#define SPIS_CONFIG_LOG_LEVEL 3 -#endif - -// SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SPIS_CONFIG_INFO_COLOR -#define SPIS_CONFIG_INFO_COLOR 0 -#endif - -// SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SPIS_CONFIG_DEBUG_COLOR -#define SPIS_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// SPI_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef SPI_CONFIG_LOG_ENABLED -#define SPI_CONFIG_LOG_ENABLED 0 -#endif -// SPI_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef SPI_CONFIG_LOG_LEVEL -#define SPI_CONFIG_LOG_LEVEL 3 -#endif - -// SPI_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SPI_CONFIG_INFO_COLOR -#define SPI_CONFIG_INFO_COLOR 0 -#endif - -// SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SPI_CONFIG_DEBUG_COLOR -#define SPI_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef TIMER_CONFIG_LOG_ENABLED -#define TIMER_CONFIG_LOG_ENABLED 0 -#endif -// TIMER_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef TIMER_CONFIG_LOG_LEVEL -#define TIMER_CONFIG_LOG_LEVEL 3 -#endif - -// TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TIMER_CONFIG_INFO_COLOR -#define TIMER_CONFIG_INFO_COLOR 0 -#endif - -// TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TIMER_CONFIG_DEBUG_COLOR -#define TIMER_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// TWIS_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef TWIS_CONFIG_LOG_ENABLED -#define TWIS_CONFIG_LOG_ENABLED 0 -#endif -// TWIS_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef TWIS_CONFIG_LOG_LEVEL -#define TWIS_CONFIG_LOG_LEVEL 3 -#endif - -// TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TWIS_CONFIG_INFO_COLOR -#define TWIS_CONFIG_INFO_COLOR 0 -#endif - -// TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TWIS_CONFIG_DEBUG_COLOR -#define TWIS_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// TWI_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef TWI_CONFIG_LOG_ENABLED -#define TWI_CONFIG_LOG_ENABLED 0 -#endif -// TWI_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef TWI_CONFIG_LOG_LEVEL -#define TWI_CONFIG_LOG_LEVEL 3 -#endif - -// TWI_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TWI_CONFIG_INFO_COLOR -#define TWI_CONFIG_INFO_COLOR 0 -#endif - -// TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef TWI_CONFIG_DEBUG_COLOR -#define TWI_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// UART_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef UART_CONFIG_LOG_ENABLED -#define UART_CONFIG_LOG_ENABLED 0 -#endif -// UART_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef UART_CONFIG_LOG_LEVEL -#define UART_CONFIG_LOG_LEVEL 3 -#endif - -// UART_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef UART_CONFIG_INFO_COLOR -#define UART_CONFIG_INFO_COLOR 0 -#endif - -// UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef UART_CONFIG_DEBUG_COLOR -#define UART_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// USBD_CONFIG_LOG_ENABLED - Enable logging in the module -//========================================================== -#ifndef USBD_CONFIG_LOG_ENABLED -#define USBD_CONFIG_LOG_ENABLED 0 -#endif -// USBD_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef USBD_CONFIG_LOG_LEVEL -#define USBD_CONFIG_LOG_LEVEL 3 -#endif - -// USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef USBD_CONFIG_INFO_COLOR -#define USBD_CONFIG_INFO_COLOR 0 -#endif - -// USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef USBD_CONFIG_DEBUG_COLOR -#define USBD_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// WDT_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef WDT_CONFIG_LOG_ENABLED -#define WDT_CONFIG_LOG_ENABLED 0 -#endif -// WDT_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef WDT_CONFIG_LOG_LEVEL -#define WDT_CONFIG_LOG_LEVEL 3 -#endif - -// WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef WDT_CONFIG_INFO_COLOR -#define WDT_CONFIG_INFO_COLOR 0 -#endif - -// WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef WDT_CONFIG_DEBUG_COLOR -#define WDT_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// -//========================================================== - -// nrf_log in nRF_Libraries - -//========================================================== -// APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef APP_TIMER_CONFIG_LOG_ENABLED -#define APP_TIMER_CONFIG_LOG_ENABLED 0 -#endif -// APP_TIMER_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef APP_TIMER_CONFIG_LOG_LEVEL -#define APP_TIMER_CONFIG_LOG_LEVEL 3 -#endif - -// APP_TIMER_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. - - -// If module generates a lot of logs, initial log level can -// be decreased to prevent flooding. Severity level can be -// increased on instance basis. -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL -#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3 -#endif - -// APP_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_TIMER_CONFIG_INFO_COLOR -#define APP_TIMER_CONFIG_INFO_COLOR 0 -#endif - -// APP_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_TIMER_CONFIG_DEBUG_COLOR -#define APP_TIMER_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED -#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0 -#endif -// APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL -#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3 -#endif - -// APP_USBD_CDC_ACM_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR -#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0 -#endif - -// APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR -#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED -#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0 -#endif -// APP_USBD_DUMMY_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL -#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3 -#endif - -// APP_USBD_DUMMY_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR -#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0 -#endif - -// APP_USBD_DUMMY_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR -#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED -#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0 -#endif -// APP_USBD_MSC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL -#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3 -#endif - -// APP_USBD_MSC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR -#define APP_USBD_MSC_CONFIG_INFO_COLOR 0 -#endif - -// APP_USBD_MSC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR -#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED -#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0 -#endif -// APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL -#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3 -#endif - -// APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR -#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0 -#endif - -// APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR -#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED -#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0 -#endif -// NRF_ATFIFO_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL -#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL -#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3 -#endif - -// NRF_ATFIFO_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR -#define NRF_ATFIFO_CONFIG_INFO_COLOR 0 -#endif - -// NRF_ATFIFO_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR -#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED -#define NRF_BALLOC_CONFIG_LOG_ENABLED 0 -#endif -// NRF_BALLOC_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL -#define NRF_BALLOC_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. - - -// If module generates a lot of logs, initial log level can -// be decreased to prevent flooding. Severity level can be -// increased on instance basis. -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL -#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3 -#endif - -// NRF_BALLOC_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_BALLOC_CONFIG_INFO_COLOR -#define NRF_BALLOC_CONFIG_INFO_COLOR 0 -#endif - -// NRF_BALLOC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR -#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED -#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0 -#endif -// NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL -#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_CLI_BLE_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR -#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0 -#endif - -// NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR -#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED -#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0 -#endif -// NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL -#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR -#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0 -#endif - -// NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR -#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED -#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0 -#endif -// NRF_CLI_UART_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL -#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_CLI_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR -#define NRF_CLI_UART_CONFIG_INFO_COLOR 0 -#endif - -// NRF_CLI_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR -#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED -#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0 -#endif -// NRF_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL -#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR -#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0 -#endif - -// NRF_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR -#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED -#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0 -#endif -// NRF_MEMOBJ_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL -#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_MEMOBJ_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR -#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0 -#endif - -// NRF_MEMOBJ_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR -#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED -#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0 -#endif -// NRF_PWR_MGMT_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL -#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_PWR_MGMT_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR -#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0 -#endif - -// NRF_PWR_MGMT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR -#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED -#define NRF_QUEUE_CONFIG_LOG_ENABLED 0 -#endif -// NRF_QUEUE_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL -#define NRF_QUEUE_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL -#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3 -#endif - -// NRF_QUEUE_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_QUEUE_CONFIG_INFO_COLOR -#define NRF_QUEUE_CONFIG_INFO_COLOR 0 -#endif - -// NRF_QUEUE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR -#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module. -//========================================================== -#ifndef NRF_SDH_ANT_LOG_ENABLED -#define NRF_SDH_ANT_LOG_ENABLED 0 -#endif -// NRF_SDH_ANT_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_SDH_ANT_LOG_LEVEL -#define NRF_SDH_ANT_LOG_LEVEL 3 -#endif - -// NRF_SDH_ANT_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_ANT_INFO_COLOR -#define NRF_SDH_ANT_INFO_COLOR 0 -#endif - -// NRF_SDH_ANT_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_ANT_DEBUG_COLOR -#define NRF_SDH_ANT_DEBUG_COLOR 0 -#endif - -// - -// NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module. -//========================================================== -#ifndef NRF_SDH_BLE_LOG_ENABLED -#define NRF_SDH_BLE_LOG_ENABLED 0 -#endif -// NRF_SDH_BLE_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_SDH_BLE_LOG_LEVEL -#define NRF_SDH_BLE_LOG_LEVEL 3 -#endif - -// NRF_SDH_BLE_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_BLE_INFO_COLOR -#define NRF_SDH_BLE_INFO_COLOR 0 -#endif - -// NRF_SDH_BLE_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_BLE_DEBUG_COLOR -#define NRF_SDH_BLE_DEBUG_COLOR 0 -#endif - -// - -// NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module. -//========================================================== -#ifndef NRF_SDH_LOG_ENABLED -#define NRF_SDH_LOG_ENABLED 0 -#endif -// NRF_SDH_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_SDH_LOG_LEVEL -#define NRF_SDH_LOG_LEVEL 3 -#endif - -// NRF_SDH_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_INFO_COLOR -#define NRF_SDH_INFO_COLOR 0 -#endif - -// NRF_SDH_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_DEBUG_COLOR -#define NRF_SDH_DEBUG_COLOR 0 -#endif - -// - -// NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module. -//========================================================== -#ifndef NRF_SDH_SOC_LOG_ENABLED -#define NRF_SDH_SOC_LOG_ENABLED 0 -#endif -// NRF_SDH_SOC_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_SDH_SOC_LOG_LEVEL -#define NRF_SDH_SOC_LOG_LEVEL 3 -#endif - -// NRF_SDH_SOC_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_SOC_INFO_COLOR -#define NRF_SDH_SOC_INFO_COLOR 0 -#endif - -// NRF_SDH_SOC_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SDH_SOC_DEBUG_COLOR -#define NRF_SDH_SOC_DEBUG_COLOR 0 -#endif - -// - -// NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED -#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0 -#endif -// NRF_SORTLIST_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL -#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_SORTLIST_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR -#define NRF_SORTLIST_CONFIG_INFO_COLOR 0 -#endif - -// NRF_SORTLIST_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR -#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED -#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0 -#endif -// NRF_TWI_SENSOR_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL -#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3 -#endif - -// NRF_TWI_SENSOR_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR -#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0 -#endif - -// NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR -#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// -//========================================================== - -// nrf_log in nRF_Serialization - -//========================================================== -// SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module. -//========================================================== -#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED -#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0 -#endif -// SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL - Default Severity level - -// <0=> Off -// <1=> Error -// <2=> Warning -// <3=> Info -// <4=> Debug - -#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL -#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3 -#endif - -// SER_HAL_TRANSPORT_CONFIG_INFO_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR -#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0 -#endif - -// SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. - -// <0=> Default -// <1=> Black -// <2=> Red -// <3=> Green -// <4=> Yellow -// <5=> Blue -// <6=> Magenta -// <7=> Cyan -// <8=> White - -#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR -#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0 -#endif - -// - -// -//========================================================== - -// -//========================================================== - -// -//========================================================== - -// -//========================================================== - -// <<< end of configuration section >>> -#endif //SDK_CONFIG_H -