NimBLE: Add ble_gap_pairing_req GAP event to accept or reject pairing request

nimble/host/include/host/ble_gap.h

@@ -128,6 +128,7 @@ struct hci_conn_update;
 #define BLE_GAP_EVENT_PERIODIC_REPORT       21
 #define BLE_GAP_EVENT_PERIODIC_SYNC_LOST    22
 #define BLE_GAP_EVENT_SCAN_REQ_RCVD         23
+#define BLE_GAP_EVENT_PAIRING_REQUEST       24
 
 /*** Reason codes for the subscribe GAP event. */
 
@@ -428,6 +429,15 @@ struct ble_gap_disc_desc {
     ble_addr_t direct_addr;
 };
 
+struct ble_gap_pairing_req {
+    uint16_t conn_handle;
+    /** Properties of the existing pairing request */
+    uint8_t io_cap;
+    uint8_t oob_data_flag;
+    uint8_t authreq;
+    uint8_t max_enc_key_size;
+};
+
 struct ble_gap_repeat_pairing {
     /** The handle of the relevant connection. */
     uint16_t conn_handle;
@@ -797,6 +807,20 @@ struct ble_gap_event {
             uint16_t conn_handle;
         } identity_resolved;
 
+        /**
+         * Represents a pairing request from peer.
+         *
+         * Valid for following event types:
+         *     o BLE_GAP_EVENT_PAIRING_REQUEST
+         * The application can accept or reject pairing request. For accepting
+         * the application should return 0 and for rejecting the request the
+         * application should provide appropriate error return code,
+         * e.g. BLE_SM_ERR_AUTHREQ
+         *     o Accept : Return 0
+         *     o Reject : Return appropriate error BLE_SM_*
+         */
+        struct ble_gap_pairing_req pairing_req;
+
         /**
          * Represents a peer's attempt to pair despite a bond already existing.
          * The application has two options for handling this event type:

nimble/host/src/ble_gap.c

@@ -5417,6 +5417,27 @@ ble_gap_identity_event(uint16_t conn_handle)
     ble_gap_call_conn_event_cb(&event, conn_handle);
 }
 
+int
+ble_gap_pairing_req_event(const struct ble_gap_pairing_req *req)
+{
+#if !NIMBLE_BLE_SM
+    return 0;
+#endif
+
+    struct ble_gap_event event;
+    int rc;
+
+    memset(&event, 0, sizeof event);
+    event.type = BLE_GAP_EVENT_PAIRING_REQUEST;
+    event.pairing_req.io_cap = req->io_cap;
+    event.pairing_req.oob_data_flag = req->oob_data_flag;
+    event.pairing_req.authreq = req->authreq;
+    event.pairing_req.max_enc_key_size = req->max_enc_key_size;
+
+    rc = ble_gap_call_conn_event_cb(&event, req->conn_handle);
+    return rc;
+}
+
 int
 ble_gap_repeat_pairing_event(const struct ble_gap_repeat_pairing *rp)
 {

nimble/host/src/ble_gap_priv.h

@@ -112,6 +112,7 @@ void ble_gap_subscribe_event(uint16_t conn_handle, uint16_t attr_handle,
                              uint8_t prev_indicate, uint8_t cur_indicate);
 void ble_gap_mtu_event(uint16_t conn_handle, uint16_t cid, uint16_t mtu);
 void ble_gap_identity_event(uint16_t conn_handle);
+int ble_gap_pairing_req_event(const struct ble_gap_pairing_req *req);
 int ble_gap_repeat_pairing_event(const struct ble_gap_repeat_pairing *rp);
 int ble_gap_master_in_progress(void);
 

nimble/host/src/ble_sm.c

@@ -847,6 +847,25 @@ ble_sm_read_bond(uint16_t conn_handle, struct ble_store_value_sec *out_bond)
     return rc;
 }
 
+/**
+ * The application is queried about pairing request, depending upon the
+ * application's response the pairing request is accepted or rejected
+ */
+static int
+ble_sm_pairing_req(uint16_t conn_handle, struct ble_sm_pair_cmd *req)
+{
+    struct ble_gap_pairing_req pair_req;
+    int rc;
+
+    pair_req.conn_handle = conn_handle;
+    pair_req.io_cap = req->io_cap;
+    pair_req.oob_data_flag = req->oob_data_flag;
+    pair_req.authreq = req->authreq;
+    pair_req.max_enc_key_size = req->max_enc_key_size;
+
+    return ble_gap_pairing_req_event(&pair_req);
+}
+
 /**
  * Checks if the specified peer is already bonded.  If it is, the application
  * is queried about how to proceed: retry or ignore.  The application should
@@ -1820,6 +1839,18 @@ ble_sm_pair_req_rx(uint16_t conn_handle, struct os_mbuf **om,
 
     ble_hs_unlock();
 
+    /* Ask the application to provide response if pairing is to be accepted or
+     * not
+     */
+    rc = ble_sm_pairing_req(conn_handle, req);
+    if (rc != 0) {
+         /* The app indicated that the pairing request should be rejected. */
+         res->sm_err = rc;
+         res->app_status = BLE_HS_SM_US_ERR(rc);
+         return;
+     }
+
+
     /* Check if there is storage capacity for a new bond.  If there isn't, ask
      * the application to make room.
      */