#!/bin/bash
#
#  Copyright (c) 2020, The OpenThread Authors.
#  All rights reserved.
#
#  Redistribution and use in source and binary forms, with or without
#  modification, are permitted provided that the following conditions are met:
#  1. Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
#  2. Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in the
#     documentation and/or other materials provided with the distribution.
#  3. Neither the name of the copyright holder nor the
#     names of its contributors may be used to endorse or promote products
#     derived from this software without specific prior written permission.
#
#  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
#  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
#  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
#  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
#  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
#  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
#  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
#  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
#  POSSIBILITY OF SUCH DAMAGE.
#

#
#  This script calls cmake and ninja to compile OpenThread for the given platform.
#
#  Compile with default build options:
#
#      script/cmake-build ${platform}
#
#  Compile with the specified build option enabled:
#
#      script/cmake-build ${platform} -D${option}=ON
#
#  Compile with the specified build option disabled that already enabled by default:
#
#      script/cmake-build ${platform} -D${option}=OFF
#
#  Need to add build type when compilling nrf528xx:
#
#      script/cmake-build ${platform} ${nrf_build_type} -D${option}=ON -D${option}=OFF
#
#  Need to add BOARD when compiling efr32:
#
#      script/cmake-build ${platform} -DBOARD=${EFR32 board}
#
#    Example:
#      script/cmake-build efr32mg21 -DBOARD=brd4180b
#
#  To enable dynamic multiprotocol support on efr32:
#
#      script/cmake-build ${platform}  -DBOARD=${EFR32 board} -DDMP=ON
#
#  Compile with the specified ninja build target:
#
#      OT_CMAKE_NINJA_TARGET="ot-cli-ftd" script/cmake-build ${platform}
#
#  Compile with the specified build directory:
#
#      OT_CMAKE_BUILD_DIR="./build/temp"  script/cmake-build ${platform}
#
#  Examples:
#
#      script/cmake-build simulation
#
#      script/cmake-build simulation -DOT_FULL_LOGS=ON -DOT_CHANNEL_MANAGER=OFF
#
#      OT_CMAKE_NINJA_TARGET="ot-cli-mtd" OT_CMAKE_BUILD_DIR="./build/temp" script/cmake-build simulation -DOT_FULL_LOGS=ON -DOT_CHANNEL_MANAGER=OFF
#

set -euxo pipefail

OT_CMAKE_NINJA_TARGET=${OT_CMAKE_NINJA_TARGET:-}

readonly OT_SRCDIR="$(pwd)"
readonly OT_PLATFORMS=(cc2538 efr32mg1 efr32mg12 efr32mg13 efr32mg21 nrf52811 nrf52833 nrf52840 simulation posix)
readonly OT_NRF528XX_BUILD_TYPES=(UART_trans USB_trans_bl SPI_trans_NCP soft_crypto soft_crypto_threading)
readonly OT_POSIX_SIM_COMMON_OPTIONS=(
    "-DOT_BORDER_AGENT=ON"
    "-DOT_BORDER_ROUTER=ON"
    "-DOT_COAP=ON"
    "-DOT_COAP_BLOCK=ON"
    "-DOT_COAP_OBSERVE=ON"
    "-DOT_COAPS=ON"
    "-DOT_COMMISSIONER=ON"
    "-DOT_CHANNEL_MANAGER=ON"
    "-DOT_CHANNEL_MONITOR=ON"
    "-DOT_CHILD_SUPERVISION=ON"
    "-DOT_DATASET_UPDATER=ON"
    "-DOT_DHCP6_CLIENT=ON"
    "-DOT_DHCP6_SERVER=ON"
    "-DOT_DIAGNOSTIC=ON"
    "-DOT_DNS_CLIENT=ON"
    "-DOT_ECDSA=ON"
    "-DOT_IP6_FRAGM=ON"
    "-DOT_JAM_DETECTION=ON"
    "-DOT_JOINER=ON"
    "-DOT_LEGACY=ON"
    "-DOT_MAC_FILTER=ON"
    "-DOT_MTD_NETDIAG=ON"
    "-DOT_PING_SENDER=ON"
    "-DOT_REFERENCE_DEVICE=ON"
    "-DOT_SERVICE=ON"
    "-DOT_SNTP_CLIENT=ON"
    "-DOT_SRP_CLIENT=ON"
    "-DOT_COVERAGE=ON"
    "-DOT_LOG_LEVEL_DYNAMIC=ON"
    "-DOT_COMPILE_WARNING_AS_ERROR=ON"
    "-DOT_RCP_RESTORATION_MAX_COUNT=2"
)

readonly OT_nrf52811_OPTIONS=(
    "-DOT_BORDER_ROUTER=ON"
    "-DOT_COAP=ON"
    "-DOT_DNS_CLIENT=ON"
    "-DOT_LINK_RAW=ON"
    "-DOT_MAC_FILTER=ON"
    "-DOT_MTD_NETDIAG=ON"
)

readonly OT_nrf52833_OPTIONS=(
    "-DOT_BORDER_AGENT=ON"
    "-DOT_BORDER_ROUTER=ON"
    "-DOT_COAP=ON"
    "-DOT_COAPS=ON"
    "-DOT_ECDSA=ON"
    "-DOT_FULL_LOGS=ON"
    "-DOT_IP6_FRAGM=ON"
    "-DOT_LINK_RAW=ON"
    "-DOT_MAC_FILTER=ON"
    "-DOT_MTD_NETDIAG=ON"
    "-DOT_SERVICE=ON"
    "-DOT_SNTP_CLIENT=ON"
    "-DOT_UDP_FORWARD=ON"
)

readonly OT_nrf52840_OPTIONS=("${OT_nrf52833_OPTIONS[@]:0}")

readonly OT_efr32_OPTIONS=(
    "-DOT_DIAGNOSTIC=ON"
    "-DOT_EXTERNAL_HEAP=ON"
    "-DOT_EXTERNAL_MBEDTLS=silabs-mbedtls"
    "-DOT_BUILTIN_MBEDTLS_MANAGEMENT=OFF"
)

readonly OT_efr32mg1_OPTIONS=(
    "${OT_efr32_OPTIONS[@]:0}"
)

readonly OT_efr32mg12_OPTIONS=(
    "${OT_efr32_OPTIONS[@]:0}"
)

readonly OT_efr32mg13_OPTIONS=(
    "${OT_efr32_OPTIONS[@]:0}"
)

readonly OT_efr32mg21_OPTIONS=(
    "${OT_efr32_OPTIONS[@]:0}"
)

die()
{
    echo " ** ERROR: Openthread CMake doesn't support platform \"$1\""
    exit 1
}

build()
{
    local platform=$1
    local builddir="${OT_CMAKE_BUILD_DIR:-build/${platform}}"
    shift

    mkdir -p "${builddir}"
    cd "${builddir}"

    cmake -GNinja -DOT_COMPILE_WARNING_AS_ERROR=ON "$@" "${OT_SRCDIR}"

    if [[ -n ${OT_CMAKE_NINJA_TARGET[*]} ]]; then
        ninja "${OT_CMAKE_NINJA_TARGET[@]}"
    else
        ninja
    fi

    cd "${OT_SRCDIR}"
}

main()
{
    if [[ $# == 0 ]]; then
        echo "Please specify a platform: ${OT_PLATFORMS[*]}"
        exit 1
    fi

    local platform="$1"
    # Check if the platform supports cmake.
    echo "${OT_PLATFORMS[@]}" | grep -wq "${platform}" || die "${platform}"

    local nrf_build_type=""
    if [[ ${platform} == nrf528* ]]; then
        nrf_build_type="$2"
        echo "${OT_NRF528XX_BUILD_TYPES[@]}" | grep -wq "${nrf_build_type}" || die "${nrf_build_type}"
        shift
    fi

    shift
    local local_options=()
    local options=(
        "-DOT_PLATFORM=${platform}"
        "-DOT_SLAAC=ON"
    )

    case "${platform}" in
        posix)
            local_options+=(
                "-DOT_LOG_OUTPUT=PLATFORM_DEFINED"
                "-DOT_POSIX_MAX_POWER_TABLE=ON"
            )
            options+=("${OT_POSIX_SIM_COMMON_OPTIONS[@]}" "${local_options[@]}")
            ;;
        simulation)
            local_options=("-DOT_LINK_RAW=ON")
            options+=("${OT_POSIX_SIM_COMMON_OPTIONS[@]}" "${local_options[@]}")
            ;;
        cc2538)
            options+=("-DCMAKE_TOOLCHAIN_FILE=examples/platforms/${platform}/arm-none-eabi.cmake" "-DCMAKE_BUILD_TYPE=MinSizeRel")
            ;;
        efr32*)
            options+=("-DCMAKE_TOOLCHAIN_FILE=examples/platforms/efr32/${platform}/arm-none-eabi.cmake")

            case "${platform}" in
                efr32mg1)
                    OT_CMAKE_NINJA_TARGET=("ot-rcp")
                    options+=("${OT_efr32mg1_OPTIONS[@]}")
                    ;;
                efr32mg12)
                    OT_CMAKE_NINJA_TARGET=("ot-rcp" "ot-cli-ftd" "ot-cli-mtd" "ot-ncp-ftd" "ot-ncp-mtd")
                    OT_CMAKE_NINJA_TARGET+=("sleepy-demo-ftd" "sleepy-demo-mtd")
                    options+=("${OT_efr32mg12_OPTIONS[@]}")
                    ;;
                efr32mg13)
                    OT_CMAKE_NINJA_TARGET=("ot-rcp" "ot-cli-ftd" "ot-cli-mtd" "ot-ncp-ftd" "ot-ncp-mtd")
                    OT_CMAKE_NINJA_TARGET+=("sleepy-demo-ftd" "sleepy-demo-mtd")
                    options+=("${OT_efr32mg13_OPTIONS[@]}")
                    ;;
                efr32mg21)
                    OT_CMAKE_NINJA_TARGET=("ot-rcp" "ot-cli-ftd" "ot-cli-mtd" "ot-ncp-ftd" "ot-ncp-mtd")
                    OT_CMAKE_NINJA_TARGET+=("sleepy-demo-ftd" "sleepy-demo-mtd")
                    options+=("${OT_efr32mg21_OPTIONS[@]}")
                    ;;
            esac
            ;;
        nrf52811)
            local_options+=("${OT_nrf52811_OPTIONS[@]}" "-DCMAKE_TOOLCHAIN_FILE=examples/platforms/nrf528xx/${platform}/arm-none-eabi.cmake" "-DCMAKE_BUILD_TYPE=Release")
            case "${nrf_build_type}" in
                UART_trans)
                    OT_CMAKE_NINJA_TARGET=("ot-cli-mtd" "ot-ncp-mtd" "ot-rcp")
                    options+=("${local_options[@]}")
                    ;;
                SPI_trans_NCP)
                    OT_CMAKE_NINJA_TARGET=("ot-ncp-mtd" "ot-rcp")
                    options+=("${local_options[@]}" "-DOT_NCP_SPI=ON")
                    ;;
            esac
            ;;
        nrf52833)
            local_options+=("${OT_nrf52833_OPTIONS[@]}" "-DCMAKE_TOOLCHAIN_FILE=examples/platforms/nrf528xx/${platform}/arm-none-eabi.cmake" "-DCMAKE_BUILD_TYPE=Release")
            case "${nrf_build_type}" in
                UART_trans)
                    options+=("${local_options[@]}")
                    ;;
                USB_trans_bl)
                    options+=("${local_options[@]}" "-DOT_USB=ON" "-DOT_BOOTLOADER=USB")
                    ;;
                SPI_trans_NCP)
                    OT_CMAKE_NINJA_TARGET=("ot-ncp-ftd" "ot-ncp-mtd" "ot-rcp")
                    options+=("${local_options[@]}" "-DOT_NCP_SPI=ON")
                    ;;
            esac
            ;;
        nrf52840)
            local_options+=("${OT_nrf52840_OPTIONS[@]}" "-DCMAKE_TOOLCHAIN_FILE=examples/platforms/nrf528xx/${platform}/arm-none-eabi.cmake" "-DCMAKE_BUILD_TYPE=Release")
            case "${nrf_build_type}" in
                UART_trans)
                    options+=("${local_options[@]}" "-DOT_EXTERNAL_MBEDTLS=nordicsemi-mbedtls")
                    ;;
                USB_trans_bl)
                    options+=("${local_options[@]}" "-DOT_USB=ON" "-DOT_BOOTLOADER=USB" "-DOT_EXTERNAL_MBEDTLS=nordicsemi-mbedtls")
                    ;;
                SPI_trans_NCP)
                    OT_CMAKE_NINJA_TARGET=("ot-ncp-ftd" "ot-ncp-mtd" "ot-rcp")
                    options+=("${local_options[@]}" "-DOT_NCP_SPI=ON" "-DOT_EXTERNAL_MBEDTLS=nordicsemi-mbedtls")
                    ;;
                soft_crypto)
                    options+=("${local_options[@]}")
                    ;;
                soft_crypto_threading)
                    options+=("${local_options[@]}" "-DOT_MBEDTLS_THREADING=ON")
                    ;;
            esac
            ;;
        *)
            options+=("-DCMAKE_TOOLCHAIN_FILE=examples/platforms/${platform}/arm-none-eabi.cmake")
            ;;
    esac

    options+=("$@")
    build "${platform}" "${options[@]}"
}

main "$@"
