From 69180fc8822b36665ebf9168f6d0bae808bdab19 Mon Sep 17 00:00:00 2001 From: blauret Date: Fri, 6 Jan 2017 06:43:19 +0100 Subject: [PATCH] Update DA15000 Readme with Trobleshooting section (#1112) --- examples/platforms/da15000/README.md | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/examples/platforms/da15000/README.md b/examples/platforms/da15000/README.md index 7b0d36a6a..15dce6e63 100755 --- a/examples/platforms/da15000/README.md +++ b/examples/platforms/da15000/README.md @@ -109,3 +109,11 @@ Board will indicate state of device according to LED blink speed. > ping fdde:ad00:beef:0:92f5:9844:67ad:a0c9 16 bytes from fdde:ad00:beef:0:92f5:9844:67ad:a0c9: icmp_seq=2 hlim=64 time=359ms ``` + +## Troubleshooting +* Why can’t I see the VCOM port? + + The Segger Virtual COM port can be disabled by software configuration. If you can see the Segger + driver properly installed but the VCOM not showing up in the device manager, it’s probably disabled + by software. To re-enable it you have to run JLinkExe and issue the command ` vcom enable`.It is + required to power cycle the device to apply the change.