Unicast SRP dataset uses a ephemeral UDP port which could be taken by
another process. Currently SRP server creates the socket at the port
after the server is added into netdata. However, at that moment the
port may not be available on the platform so it may fail to create the
socket and start the server.
This commit adds the logic to restart the enabling process with
another port candidate if SRP server fails to create the socket.
This commit enables channel manager on SSED, together with channel monitor,
auto-selecting a better CSL channel for the link between child and its parent.
It also fixes tracking of CcaSuccessRate on CslChannel and adds toranj tests
for auto-channel selection and thread_cert test for autocsl-channel selection.
- Validates that key guard time is updated to 93% of key rotation
time when it changes.
- Checks for proper key sequence updates after key rotation
expiration.
- Confirms key guard mechanism blocks key sequence increments
while mesh nodes staying connected.
Config `OPENTHREAD_CONFIG_SRP_CLIENT_AUTO_START_DEFAULT_MODE` is
changed to use `1` by default (unless explicitly overridden in
project configs).
It also updates related test scripts to utilize auto-start mode or
explicitly disable it for manual SRP client control, reflecting this
default change.
Create OT API to support trel telemetry which is supported through
platform API and also add cli support to get/reset trel counters.
Metrics we are adding are:
- trel_frames_tx
- trel_bytes_tx
- trel_frames_rx
- trel_bytes_rx
- trel_frames_tx_failed
- num_trel_peers
Metrics already supported through API:
- trel_enabled
This commit updates the `AutoAddress` mode in `Srp::Client` to
exclude any deprecated (non-preferred) address when registering
host addresses.
It also updates `test_srp_auto_host_address` to validate the new
behavior.
This commit adds `otNetDataGetCommissioningDataset()` as a public
API to retrieve the Commissioning Dataset from the Network Data.
It also updates CLI `netdata show` command to output the Commissioning
Dataset information. The documentation in `README_NETDATA.md` and
in `cli_network_data` are also updated. The test scripts that parse
`netdata show` output are also updated.
This commit implements the packet logic in OT core. It aims to have
the same effect as what's already achieved by our iptables-based
firewall. Instead of leveraging iptables, this commit filters the
border routing packets in user space by checking the
source/destination addresses of a packet.
This commit also adds a job to do BR regression test when this feature
is enabled and iptables-based firewall is disabled.
This commit implements a new module LinkMetricsManager, which utilizes
the Link Metrics feature to get the Link Metrics data from neighboring
devices.
The commit also adds a few tests to the module:
- Unit Test: tests/unit/test_link_metrics_manager.cpp, will be run in
`unit-tests` in `unit.yml`.
- Expect Test: tests/scripts/expect/v1_2-linkmetricsmgr.exp, will be
run in `expects` in `simulation-1.2.yml`.
- Simulation Test:
tests/scripts/thread-cert/v1_2_LowPower_test_link_metrics_manager.py,
will be run in `packet-verification-low-power` in
`simulation-1.2.yml`.
This commit updates `Dns::ServiceDiscovery::Server` such that when
answering a PTR query with more than one answer, it does not include
additional records. This is to keep the size of the response small.
This commit also updates the test scripts validating browse (PTR
query) function to check the new behavior. In particular, a common
python function `_parse_dns_service_info()` is added to parse service
info in CLI output of "dns browse" or "dns service" commands and
handle if output of "dns browse" does not include service info.
This commit adds a mechanism to delay the downgrade of routers or
leader when the security policy TLV changes in the Active Operational
Dataset such that the device is no longer eligible to act as a
router.
If the decision to become a child is made due to a security policy
change, the device first delays a random period up to the "router
selection jitter" before downgrading. If the device is the leader, an
additional fixed delay of 10 seconds is added to the random period.
If the security policy changes again while the device is waiting to
downgrade such that it becomes router-eligible again, the downgrade
is cancelled and the device remains in its current role.
This commit adds a `test_router_downgrade_on_sec_policy_change` to
validate the behavior of newly added mechanism.
This commit also updates the CLI `dataset` sub-commands to allow
getting and setting the "version threshold for routing" (VR) field in
security policy.
We should notice that the default CIDR (`192.168.255.0/24`) is not
safe to use, however, in most cases, the CIDR used can only be
determined during runtime since the single binary might be distributed
to BRs in different network conditions. And we cannot conclude an
always safe CIDR in all conditions.
This commit will emit an event when NAT64 CIDR is changed. So the
platform driver can update the route for NAT64.
This commit adds a public OT API to replace a previously published
external route entry in the Thread Network Data. It also adds a
related CLI command, and updates `test_netdata_publisher` to
validate the new behavior.
This commit adds a new file
`tests/scripts/thread-cert/border_router/nat64/test_upstream_dns.py`
to test scripts for testing the DNS forwarding functions.
The test adds a record `test.domain` to the bind9 interface since when
adding to DNSSD tests, the OpenThread's DNSSD server will be conflict
with the Docker's DNS forwarding functions.
This commit adds `otNetDataGetNextLowpanContextInfo()` to iterate
through the list of LoWPAN Context entries in Thread Network Data
providing info about the prefix, its LoWPAN Context ID and Compress
flag (relating to `ContextTlv` sub-TLVs of `PrefixTlv`s in Network
Data).
This commit also updates CLI command `netdata show` to list the
context IDs in addition to prefixes, routes, and services.
This commit contains changes to child supervision feature. It adds a
new mechanism for a child to inform its desired supervision interval
to its parent. A new optional MLE TLV is added with type 27 and value
of `uint16_t` indicating the supervision interval in seconds. This
TLV is included in MLE Child ID Request and MLE Child Update Request
(sent from the child). The parent echoes back this TLV in the
corresponding responses to indicate that it supports supervision. This
commit changes the parent implementation to track the supervision
interval per child.
This commit also updates the OT public APIs along with the related
CLI commands:
- API now allows the supervision interval to be set on a child.
- New field in `otChildInfo` to indicate the child's supervision
interval.
- New counter is added to track the number of supervision check
timeouts failures on a child (intended for testing and debugging).
This commit adds a test `test_child_supervision` to cover behavior of
child supervision and its new behaviors.
This change allows backward compatibility: If the parent does not
support child supervision, it ignores the new TLV in the MLE messages
and the child would fall back to periodically exchanging MLE Child
Update Request with parent. If the child does not support supervision
and/or does not indicate its desired child supervision interval, the
parent will fall back to use the configured default interval.
This commit adds new public OT APIs in `border_routing.h` to get the
current state of `RoutingManager` and to get the current favored
on-link prefix.
This commit also updates CLI `br` commands:
- It moves the CLI `br` implementation into own `cli_br` module.
- It adds `br state` to get the current state
- It changes `br omrprefix`, `br onlinkprefix`, and `br nat64prefix`
to output both local and favored prefixes when no additional arg
is provided and allow the use of `local` or `favored` extra arg to
specify the type.
- It updates the documentation of `br` related commands in the source
code and also adding `cli/README_BR.md`.
This commit add a new feature in `Srp::Client` to allow user to
specify the lease and/or key lease intervals explicitly per service.
The lease intervals in a service can be left unspecified(set to zero)
in which case the default lease intervals will be used.
In an SRP Update message, the lease info is included in additional
section in an Update Lease Option record. Therefore the lease values
are applicable to the entire message and all its records. If we have
services with different lease intervals, they need to be registered
in separate messages. This commit updates `Srp::Client` to implement
such a mechanism. When preparing an SRP message, we first determine
the lease and key lease intervals and ensure the services using
matching intervals are included in the message.
This commit also updates and simplifies the "single service mode"
functionality to use the newly added mechanism for tracking which
services are included in the message.
This commit adds `test_srp_register_services_diff_lease` which covers
the behavior of the newly added mechanisms.
This commit updates CLI `linkmetrics query` command to allow it
to be used in blocking mode (wait for response to query). This
is then used in different tests to validate the `LinkMetrics`
module behavior. In particular, `v1_2_test_single_probe` and
`v1_2_LowPower_7_2_01_ForwardTrackingSeries` are updated to
validate that the received query report message is correctly
parsed.
This commit fetches the NAT64 prefix on infrastructure interface and
advertise it to Network Data at medium preference.
- Use `getaddrinfo_a()` function to asynchronously lookup the ipv6
address of the special domain `ipv4only.arpa`. The infrastructure
NAT64 prefix is extracted from the domain answer.
- `mInfraIfNat64PrefixStaleTimer` is scheduled to monitor the presence
and change of infrastructure NAT64 prefix.
- `EvaluateNat64Prefix` evaluates whether to advertise the
infrastructure prefix or the local ULA prefix or neither. When there
is a new infrastructure prefix, it will withdraw the legacy one and
add the new one. When the infrastructure prefix no longer exists, it
will withdraw the legacy one and add the local ULA prefix. When the
infrastructure prefix presents again, it will add the infrastructure
prefix and withdraw the local ULA prefix.
New tests are added to test the scenarios when infrastructure NAT64
prefix exists. `DNS64` on OTBR is turned on to enable `bind9` with
NAT64 prefix on infrastructure interface for these tests. `bind9` is
explicitly turned off when testing local ULA prefix. Since bind9 is
conflict with other components like dnssd, all nat64 tests are moved
under /nat64 directory and configured separately.
The case that two or more BRs have same infrastructure NAT64 prefix is
not covered by this commit and will be followed up later.
This commit adds a "auto host address mode" in SRP client. When
enabled, host IPv6 addresses are automatically set by SRP client
using all the unicast addresses on Thread netif excluding the
link-local and mesh-local addresses. If there is no valid address,
then Mesh Local EID address is added. The SRP client will
automatically re-register when/if addresses on Thread netif are
updated (e.g., new addresses are added or existing addresses are
removed).
This commit updates CLI to add support for new SRP client APIs related
to the new feature. It also adds `test_srp_auto_host_address` test to
cover the behavior of this feature.
This commit adds an API `otThreadDetachGracefully` to notify other
nodes in the network (if any) and then stop Thread protocol
operation. It sends an Address Release if it's a router, or sets its
child timeout to 0 if it's a child.
I just found that we don't have a test case covers the scenario of
DNS-SD when there are multiple BRs. Specially, one of the BRs starts
with no mDNS cache.
There was a time that our mDNS publisher answered the queries
correctly, even when there was a bug in mDNS publisher that it
cancelled resolving/browsing too early (was fixed in
https://github.com/openthread/ot-br-posix/pull/1120). That bug was
hidden because mDNS cache already contained the needed information.
This commit implements new logging model in OpenThread. Each core
module can specify its own module name using `RegisterLogModule()`.
The registered log module name is then included in the all the log
messages emitted from the specific file. This model replaces and
enhances the log region model.
This commit adds tests for NAT64 prefix
advertisement. BORDER_ROUTING_NAT64 is set to 1 to enable the feature
in tests.
It also adjusted some util functions for prefixes and routes in
netdata.
Testing outbound connectivity to IPv4 hosts is not covered yet. It
will be added after we update OTBR.
- Adds platform API `trelDnssdInitialize` to initialize TREL
DNS-SD module.
- Adds `test_trel_connectivity.py` test.
- Fixed `Border Router` TREL test to really use TREL.
Abtin Keshavarzian