/* * Copyright (c) 2026, The OpenThread Authors. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the copyright holder nor the * names of its contributors may be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include #include "platform/nexus_core.hpp" #include "platform/nexus_node.hpp" namespace ot { namespace Nexus { /** * Time to advance for a node to form a network and become leader, in milliseconds. */ static constexpr uint32_t kFormNetworkTime = 10 * 1000; /** * Time to advance for a node to join as a router, in milliseconds. */ static constexpr uint32_t kAttachToRouterTime = 200 * 1000; /** * Time to advance for the network to stabilize, in milliseconds. */ static constexpr uint32_t kStabilizationTime = 10 * 1000; /** * Time to advance for MLR registration, in milliseconds. */ static constexpr uint32_t kMlrRegistrationTime = 5 * 1000; /** * MLR Timeout Minimum value in seconds. */ static constexpr uint32_t kMlrTimeoutMin = 300; /** * Low MLR Timeout value in seconds. */ static constexpr uint32_t kMlrTimeoutLow = kMlrTimeoutMin / 4; /** * Multicast address MA1. */ static const char kMA1[] = "ff04::1234:777a:1"; void TestMatnTc22(void) { /** * 5.10.18 MATN-TC-22: Use of low MLR timeout defaults to MLR_TIMEOUT_MIN * * 5.10.18.1 Topology * - BR_1 * - TD (DUT) * * 5.10.18.2 Purpose & Description * The purpose of this test case is to verify that a Primary BBR that is configured with a low value of MLR timeout * (< MLR_TIMEOUT_MIN) is interpreted as using an MLR timeout of MLR_TIMEOUT_MIN by all the Thread Devices (DUT). * * Valid DUT Roles: * - DUT as TD (FED, REED or Router) * * Required Devices and Topology: * - BR_1: Test bed BR device operating as the Primary BBR. * - TD (DUT): Device operating as a Thread FTD (FED, REED or Router). * * Initial Conditions: * - P1: BR_1 MLR timeout value to configured to of BR_1 to be (MLR_TIMEOUT_MIN / 4) seconds. * * Spec Reference | V1.2 Section | V1.3.0 Section * -----------------|--------------|--------------- * Multicast | 5.10.18 | 5.10.18 */ Core nexus; Node &br1 = nexus.CreateNode(); Node &dut1 = nexus.CreateNode(); // Router Node &dut2 = nexus.CreateNode(); // FED Ip6::Address ma1; br1.SetName("BR_1"); dut1.SetName("DUT_Router"); dut2.SetName("DUT_FED"); SuccessOrQuit(ma1.FromString(kMA1)); nexus.AdvanceTime(0); SuccessOrQuit(Instance::SetGlobalLogLevel(kLogLevelNote)); /** * Step 0 * - Device: N/A * - Description: Topology formation – BR_1. Topology addition – TD (DUT). Boot the DUT. Configure the DUT to * register multicast address, MA1, at its parent. * - Pass Criteria: * - N/A */ Log("Step 0: Topology formation – BR_1. Topology addition – TD (DUT_Router and DUT_FED). DUTs register MA1."); AllowLinkBetween(br1, dut1); AllowLinkBetween(br1, dut2); br1.Form(); nexus.AdvanceTime(kFormNetworkTime); VerifyOrQuit(br1.Get().IsLeader()); br1.Get().Init(1, true); br1.Get().Init(); SuccessOrQuit(br1.Get().SetEnabled(true)); br1.Get().SetEnabled(true); /** Configure BR_1 with low MLR timeout. */ { BackboneRouter::Config config; br1.Get().GetConfig(config); config.mMlrTimeout = kMlrTimeoutLow; SuccessOrQuit(br1.Get().SetConfig(config)); } dut1.Join(br1, Node::kAsFtd); dut2.Join(br1, Node::kAsFed); nexus.AdvanceTime(kAttachToRouterTime); VerifyOrQuit(dut1.Get().IsRouter()); VerifyOrQuit(dut2.Get().IsChild()); nexus.AdvanceTime(kStabilizationTime); VerifyOrQuit(br1.Get().IsPrimary()); nexus.AddTestVar("MA1", kMA1); nexus.AddTestVar("MLR_TIMEOUT_MIN", kMlrTimeoutMin); SuccessOrQuit(dut1.Get().SubscribeExternalMulticast(ma1)); SuccessOrQuit(dut2.Get().SubscribeExternalMulticast(ma1)); nexus.AdvanceTime(kMlrRegistrationTime); /** * Step 1 * - Device: TD (DUT) * - Description: Within MLR_TIMEOUT_MIN seconds of initial registration, the device automatically re-registers for * multicast address, MA1, at BR_1. * - Pass Criteria: * - The DUT MUST re-register for multicast address, MA1, at BR_1. * - The re-registration MUST occur within the time MLR_TIMEOUT_MIN seconds since initial registration. * - No more than 2 re-registrations MUST occur within this time. */ Log("Step 1: Within MLR_TIMEOUT_MIN seconds, DUT re-registers for MA1."); nexus.AdvanceTime(kMlrTimeoutMin * 1000); nexus.SaveTestInfo("test_1_2_MATN_TC_22.json"); } } // namespace Nexus } // namespace ot int main(void) { ot::Nexus::TestMatnTc22(); printf("All tests passed\n"); return 0; }