#!/bin/bash
#
#  Copyright (c) 2020, The OpenThread Authors.
#  All rights reserved.
#
#  Redistribution and use in source and binary forms, with or without
#  modification, are permitted provided that the following conditions are met:
#  1. Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
#  2. Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in the
#     documentation and/or other materials provided with the distribution.
#  3. Neither the name of the copyright holder nor the
#     names of its contributors may be used to endorse or promote products
#     derived from this software without specific prior written permission.
#
#  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
#  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
#  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
#  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
#  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
#  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
#  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
#  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
#  POSSIBILITY OF SUCH DAMAGE.
#

set -euxo pipefail

reset_source()
{
    rm -rf build output tmp
}

build_cc1352()
{
    local options=(
        "COMMISSIONER=1"
        "DHCP6_CLIENT=1"
        "DHCP6_SERVER=1"
        "DNS_CLIENT=1"
        "JOINER=1"
        "SLAAC=1"
    )

    reset_source
    make -f examples/Makefile-cc1352 "${options[@]}"
}

build_cc2538()
{
    local options=(
        "COMMISSIONER=1"
        "DHCP6_CLIENT=1"
        "DHCP6_SERVER=1"
        "DNS_CLIENT=1"
        "JOINER=1"
        "SLAAC=1"
    )

    reset_source
    make -f examples/Makefile-cc2538 "${options[@]}"
}

build_cc2650()
{
    reset_source
    make -f examples/Makefile-cc2650
}

build_cc2652()
{
    local options=(
        "COMMISSIONER=1"
        "DHCP6_CLIENT=1"
        "DHCP6_SERVER=1"
        "DNS_CLIENT=1"
        "JOINER=1"
        "SLAAC=1"
    )

    reset_source
    make -f examples/Makefile-cc2652 "${options[@]}"
}

build_jn5189()
{
    local options=(
        "COMMISSIONER=1"
        "DHCP6_CLIENT=1"
        "DHCP6_SERVER=1"
        "DNS_CLIENT=1"
        "JOINER=1"
        "SLAAC=1"
    )

    reset_source
    make -f examples/Makefile-jn5189 "${options[@]}"
}

build_k32w061()
{
    local options=(
        "COMMISSIONER=1"
        "DHCP6_CLIENT=1"
        "DHCP6_SERVER=1"
        "DNS_CLIENT=1"
        "JOINER=1"
        "SLAAC=1"
    )

    reset_source
    make -f examples/Makefile-k32w061 "${options[@]}"
}

build_kw41z()
{
    local options=(
        "COMMISSIONER=1"
        "DHCP6_CLIENT=1"
        "DHCP6_SERVER=1"
        "DNS_CLIENT=1"
        "JOINER=1"
        "SLAAC=1"
    )

    reset_source
    make -f examples/Makefile-kw41z "${options[@]}"
}

build_nrf52811()
{
    local options=(
        "BORDER_ROUTER=1"
        "COAP=1"
        "DNS_CLIENT=1"
        "LINK_RAW=1"
        "MAC_FILTER=1"
        "MTD_NETDIAG=1"
    )

    # UART transport
    reset_source
    make -f examples/Makefile-nrf52811 "${options[@]}"

    # SPI transport for NCP
    reset_source
    make -f examples/Makefile-nrf52811 "${options[@]}" NCP_SPI=1

    # Build without transport (no CLI or NCP applications)
    reset_source
    make -f examples/Makefile-nrf52811 DISABLE_TRANSPORTS=1
}

build_nrf52833()
{
    local options=(
        "BORDER_AGENT=1"
        "BORDER_ROUTER=1"
        "COAP=1"
        "COAPS=1"
        "COMMISSIONER=1"
        "DHCP6_CLIENT=1"
        "DHCP6_SERVER=1"
        "DNS_CLIENT=1"
        "ECDSA=1"
        "FULL_LOGS=1"
        "IP6_FRAGM=1"
        "JOINER=1"
        "LINK_RAW=1"
        "MAC_FILTER=1"
        "MTD_NETDIAG=1"
        "SERVICE=1"
        "SLAAC=1"
        "SNTP_CLIENT=1"
        "UDP_FORWARD=1"
    )

    # UART transport
    reset_source
    make -f examples/Makefile-nrf52833 "${options[@]}"

    # USB transport
    reset_source
    make -f examples/Makefile-nrf52833 "${options[@]}" USB=1

    # SPI transport for NCP
    reset_source
    make -f examples/Makefile-nrf52833 "${options[@]}" NCP_SPI=1

    # Build without transport (no CLI or NCP applications)
    reset_source
    make -f examples/Makefile-nrf52833 "${options[@]}" DISABLE_TRANSPORTS=1
}

build_nrf52840()
{
    local options=(
        "BORDER_AGENT=1"
        "BORDER_ROUTER=1"
        "COAP=1"
        "COAPS=1"
        "COMMISSIONER=1"
        "DEBUG=1"
        "DHCP6_CLIENT=1"
        "DHCP6_SERVER=1"
        "DNS_CLIENT=1"
        "ECDSA=1"
        "FULL_LOGS=1"
        "IP6_FRAGM=1"
        "JOINER=1"
        "LINK_RAW=1"
        "MAC_FILTER=1"
        "MTD_NETDIAG=1"
        "SERVICE=1"
        "SLAAC=1"
        "SNTP_CLIENT=1"
        "UDP_FORWARD=1"
    )

    # UART transport
    reset_source
    make -f examples/Makefile-nrf52840 "${options[@]}"

    # USB transport with bootloader e.g. to support PCA10059 dongle
    reset_source
    make -f examples/Makefile-nrf52840 "${options[@]}" BOOTLOADER=1 USB=1

    # SPI transport for NCP
    reset_source
    make -f examples/Makefile-nrf52840 "${options[@]}" NCP_SPI=1

    # Build without transport (no CLI or NCP applications)
    reset_source
    make -f examples/Makefile-nrf52840 "${options[@]}" DISABLE_TRANSPORTS=1

    # Software cryptography
    reset_source
    make -f examples/Makefile-nrf52840 "${options[@]}" DISABLE_BUILTIN_MBEDTLS=0

    # Software cryptography with threading support
    reset_source
    make -f examples/Makefile-nrf52840 "${options[@]}" DISABLE_BUILTIN_MBEDTLS=0 MBEDTLS_THREADING=1
}

build_qpg6095()
{
    local options=(
        "COMMISSIONER=1"
        "DHCP6_CLIENT=1"
        "DHCP6_SERVER=1"
        "DNS_CLIENT=1"
        "JOINER=1"
        "SLAAC=1"
    )

    reset_source
    make -f examples/Makefile-qpg6095 "${options[@]}"
}

build_samr21()
{
    local options=(
        "COMMISSIONER=1"
        "DHCP6_CLIENT=1"
        "DHCP6_SERVER=1"
        "DNS_CLIENT=1"
        "JOINER=1"
        "SLAAC=1"
    )

    reset_source

    wget http://ww1.microchip.com/downloads/en/DeviceDoc/asf-standalone-archive-3.45.0.85.zip
    unzip -qq asf-standalone-archive-3.45.0.85.zip
    mv xdk-asf-3.45.0 third_party/microchip/asf

    make -f examples/Makefile-samr21 "${options[@]}"
}

main()
{
    ./bootstrap

    build_cc1352
    build_cc2538
    build_cc2650
    build_cc2652
    build_jn5189
    build_k32w061
    build_kw41z
    build_nrf52811
    build_nrf52833
    build_nrf52840
    build_qpg6095
    build_samr21
}

main "$@"