mirror of
https://github.com/espressif/openthread.git
synced 2026-06-06 05:24:51 +00:00
Zhanglong Xia
336 lines
13 KiB
Python
Executable File
336 lines
13 KiB
Python
Executable File
#!/usr/bin/env python3
|
||
#
|
||
# Copyright (c) 2016, The OpenThread Authors.
|
||
# All rights reserved.
|
||
#
|
||
# Redistribution and use in source and binary forms, with or without
|
||
# modification, are permitted provided that the following conditions are met:
|
||
# 1. Redistributions of source code must retain the above copyright
|
||
# notice, this list of conditions and the following disclaimer.
|
||
# 2. Redistributions in binary form must reproduce the above copyright
|
||
# notice, this list of conditions and the following disclaimer in the
|
||
# documentation and/or other materials provided with the distribution.
|
||
# 3. Neither the name of the copyright holder nor the
|
||
# names of its contributors may be used to endorse or promote products
|
||
# derived from this software without specific prior written permission.
|
||
#
|
||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
||
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||
# POSSIBILITY OF SUCH DAMAGE.
|
||
#
|
||
|
||
import copy
|
||
import unittest
|
||
|
||
import command
|
||
import config
|
||
import copy
|
||
import ipv6
|
||
import thread_cert
|
||
from pktverify.consts import WIRESHARK_OVERRIDE_PREFS, ADDR_QRY_URI, ADDR_NTF_URI, NL_ML_EID_TLV, NL_RLOC16_TLV, NL_TARGET_EID_TLV
|
||
from pktverify.packet_verifier import PacketVerifier
|
||
from pktverify.bytes import Bytes
|
||
from pktverify.addrs import Ipv6Addr
|
||
|
||
LEADER = 1
|
||
BR = 2
|
||
ROUTER1 = 3
|
||
DUT_ROUTER2 = 4
|
||
MED1 = 5
|
||
|
||
PREFIX_1 = '2003::/64'
|
||
GUA_1_START = '2003'
|
||
PREFIX_2 = '2004::/64'
|
||
|
||
# Test Purpose and Description:
|
||
# -----------------------------
|
||
# The purpose of this test case is to validate that the DUT is able to generate
|
||
# Address Query and Address Notification messages
|
||
# The Border Router is configured as a SLAAC server for prefixes 2003:: & 2004::
|
||
#
|
||
# Test Topology:
|
||
# -------------
|
||
# BorderRouter - Leader
|
||
# / \
|
||
# Router_1 - Router_2(DUT)
|
||
# |
|
||
# MED
|
||
#
|
||
# DUT Types:
|
||
# ----------
|
||
# Router
|
||
|
||
|
||
class Cert_5_3_10_AddressQuery(thread_cert.TestCase):
|
||
USE_MESSAGE_FACTORY = False
|
||
SUPPORT_NCP = False
|
||
|
||
TOPOLOGY = {
|
||
LEADER: {
|
||
'name': 'LEADER',
|
||
'mode': 'rdn',
|
||
'allowlist': [BR, ROUTER1, DUT_ROUTER2]
|
||
},
|
||
BR: {
|
||
'name': 'BR',
|
||
'mode': 'rdn',
|
||
'allowlist': [LEADER]
|
||
},
|
||
ROUTER1: {
|
||
'name': 'ROUTER_1',
|
||
'mode': 'rdn',
|
||
'allowlist': [LEADER, DUT_ROUTER2]
|
||
},
|
||
DUT_ROUTER2: {
|
||
'name': 'ROUTER_2',
|
||
'mode': 'rdn',
|
||
'allowlist': [LEADER, ROUTER1, MED1]
|
||
},
|
||
MED1: {
|
||
'name': 'MED',
|
||
'is_mtd': True,
|
||
'mode': 'rn',
|
||
'allowlist': [DUT_ROUTER2]
|
||
},
|
||
}
|
||
# override wireshark preferences with case needed parameters
|
||
CASE_WIRESHARK_PREFS = copy.deepcopy(WIRESHARK_OVERRIDE_PREFS)
|
||
CASE_WIRESHARK_PREFS['6lowpan.context1'] = PREFIX_1
|
||
CASE_WIRESHARK_PREFS['6lowpan.context2'] = PREFIX_2
|
||
|
||
def test(self):
|
||
# 1 & 2
|
||
self.nodes[LEADER].start()
|
||
self.simulator.go(config.LEADER_STARTUP_DELAY)
|
||
self.assertEqual(self.nodes[LEADER].get_state(), 'leader')
|
||
|
||
self.nodes[BR].start()
|
||
self.simulator.go(config.ROUTER_STARTUP_DELAY)
|
||
self.assertEqual(self.nodes[BR].get_state(), 'router')
|
||
|
||
# Configure two On-Mesh Prefixes on the BR
|
||
self.nodes[BR].add_prefix(PREFIX_1, 'paros')
|
||
self.nodes[BR].add_prefix(PREFIX_2, 'paros')
|
||
self.nodes[BR].register_netdata()
|
||
|
||
self.nodes[DUT_ROUTER2].start()
|
||
self.simulator.go(config.ROUTER_STARTUP_DELAY)
|
||
self.assertEqual(self.nodes[DUT_ROUTER2].get_state(), 'router')
|
||
|
||
self.nodes[ROUTER1].start()
|
||
self.simulator.go(config.ROUTER_STARTUP_DELAY)
|
||
self.assertEqual(self.nodes[ROUTER1].get_state(), 'router')
|
||
|
||
self.nodes[MED1].start()
|
||
self.simulator.go(5)
|
||
self.assertEqual(self.nodes[MED1].get_state(), 'child')
|
||
|
||
self.collect_rlocs()
|
||
self.collect_rloc16s()
|
||
self.collect_ipaddrs()
|
||
|
||
# 3 MED1: MED1 sends an ICMPv6 Echo Request to Router1 using GUA
|
||
# PREFIX_1 address
|
||
router1_addr = self.nodes[ROUTER1].get_addr(PREFIX_1)
|
||
self.assertTrue(router1_addr is not None)
|
||
self.assertTrue(self.nodes[MED1].ping(router1_addr))
|
||
self.simulator.go(1)
|
||
|
||
# 4 BR: BR sends an ICMPv6 Echo Request to MED1 using GUA PREFIX_1
|
||
# address
|
||
med1_addr = self.nodes[MED1].get_addr(PREFIX_1)
|
||
self.assertTrue(med1_addr is not None)
|
||
self.assertTrue(self.nodes[BR].ping(med1_addr))
|
||
self.simulator.go(1)
|
||
|
||
# 5 MED1: MED1 sends an ICMPv6 Echo Request to ROUTER1 using GUA PREFIX_1
|
||
# address
|
||
self.assertTrue(self.nodes[MED1].ping(router1_addr))
|
||
self.simulator.go(1)
|
||
|
||
# 6 DUT_ROUTER2: Power off ROUTER1 and wait 580 seconds to allow the
|
||
# LEADER to expire its Router ID
|
||
router1_id = self.nodes[ROUTER1].get_router_id()
|
||
self.nodes[ROUTER1].stop()
|
||
self.simulator.go(580)
|
||
|
||
# Send an ICMPv6 Echo Request from MED1 to ROUTER1 GUA PREFIX_1 address
|
||
self.assertFalse(self.nodes[MED1].ping(router1_addr))
|
||
self.simulator.go(1)
|
||
|
||
# 7 MED1: Power off MED1 and wait to allow DUT_ROUTER2 to timeout the
|
||
# child
|
||
self.nodes[MED1].stop()
|
||
self.simulator.go(config.MLE_END_DEVICE_TIMEOUT)
|
||
|
||
# BR sends two ICMPv6 Echo Requests to MED1 GUA PREFIX_1 address
|
||
self.assertFalse(self.nodes[BR].ping(med1_addr))
|
||
self.assertFalse(self.nodes[BR].ping(med1_addr))
|
||
|
||
def verify(self, pv):
|
||
pkts = pv.pkts
|
||
pv.summary.show()
|
||
|
||
LEADER = pv.vars['LEADER']
|
||
ROUTER_1 = pv.vars['ROUTER_1']
|
||
ROUTER_2 = pv.vars['ROUTER_2']
|
||
ROUTER_2_RLOC = pv.vars['ROUTER_2_RLOC']
|
||
ROUTER_2_RLOC16 = pv.vars['ROUTER_2_RLOC16']
|
||
BR = pv.vars['BR']
|
||
BR_RLOC = pv.vars['BR_RLOC']
|
||
MED = pv.vars['MED']
|
||
MED_RLOC16 = pv.vars['MED_RLOC16']
|
||
MM = pv.vars['MM_PORT']
|
||
GUA1 = {}
|
||
|
||
for node in ('ROUTER_1', 'BR', 'MED'):
|
||
for addr in pv.vars['%s_IPADDRS' % node]:
|
||
if addr.startswith(Bytes(GUA_1_START)):
|
||
GUA1[node] = addr
|
||
|
||
# Step 2: Build the topology as described
|
||
|
||
pv.verify_attached('BR', 'LEADER')
|
||
for i in (2, 1):
|
||
pv.verify_attached('ROUTER_%d' % i, 'LEADER')
|
||
pv.verify_attached('MED', 'ROUTER_2', 'MTD')
|
||
|
||
# Step 3: MED sends an ICMPv6 Echo Request to Router_1 using GUA 2003::
|
||
# address
|
||
# The DUT MUST generate an Address Query Request on MED’s behalf
|
||
# to find each node’s RLOC.
|
||
# The Address Query Request MUST be sent to the Realm-Local
|
||
# All-Routers address (FF03::2)
|
||
# CoAP URI-Path
|
||
# - NON POST coap://<FF03::2>
|
||
# CoAP Payload
|
||
# - Target EID TLV
|
||
# The DUT MUST receive and process the incoming Address Query
|
||
# Response and forward the ICMPv6 Echo Request packet to Router_1
|
||
|
||
_pkt = pkts.filter_ping_request().\
|
||
filter_wpan_src64(MED).\
|
||
filter_ipv6_dst(GUA1['ROUTER_1']).\
|
||
must_next()
|
||
pkts.filter_wpan_src64(ROUTER_2).\
|
||
filter_RLARMA().\
|
||
filter_coap_request(ADDR_QRY_URI, port=MM).\
|
||
filter(lambda p: p.thread_address.tlv.target_eid == GUA1['ROUTER_1']).\
|
||
must_next()
|
||
pkts.filter_ping_request(identifier=_pkt.icmpv6.echo.identifier).\
|
||
filter_wpan_src64(ROUTER_2).\
|
||
filter_ipv6_dst(GUA1['ROUTER_1']).\
|
||
must_next()
|
||
pkts.filter_ping_reply(identifier=_pkt.icmpv6.echo.identifier).\
|
||
filter_wpan_src64(ROUTER_1).\
|
||
filter_ipv6_dst(GUA1['MED']).\
|
||
must_next()
|
||
pkts.filter_ping_reply(identifier=_pkt.icmpv6.echo.identifier).\
|
||
filter_wpan_src64(ROUTER_2).\
|
||
filter_wpan_dst16(MED_RLOC16).\
|
||
must_next()
|
||
|
||
# Step 4: Border Router sends an ICMPv6 Echo Request to MED using GUA 2003::
|
||
# address
|
||
# The DUT MUST respond to the Address Query Request with a properly
|
||
# formatted Address Notification Message:
|
||
# CoAP URI-Path
|
||
# - CON POST coap://[<Address Query Source>]:MM/a/an
|
||
# CoAP Payload
|
||
# - ML-EID TLV
|
||
# - RLOC16 TLV
|
||
# - Target EID TLV
|
||
# The IPv6 Source address MUST be the RLOC of the originator
|
||
# The IPv6 Destination address MUST be the RLOC of the destination
|
||
|
||
pkts.filter_wpan_src64(BR).\
|
||
filter_RLARMA().\
|
||
filter_coap_request(ADDR_QRY_URI, port=MM).\
|
||
filter(lambda p: p.thread_address.tlv.target_eid == GUA1['MED']).\
|
||
must_next()
|
||
pkts.filter_ipv6_src_dst(ROUTER_2_RLOC, BR_RLOC).\
|
||
filter_coap_request(ADDR_NTF_URI, port=MM).\
|
||
filter(lambda p: {
|
||
NL_ML_EID_TLV,
|
||
NL_RLOC16_TLV,
|
||
NL_TARGET_EID_TLV
|
||
} <= set(p.coap.tlv.type) and\
|
||
p.thread_address.tlv.target_eid == GUA1['MED'] and\
|
||
p.thread_address.tlv.rloc16 == ROUTER_2_RLOC16
|
||
).\
|
||
must_next()
|
||
_pkt = pkts.filter_ping_request().\
|
||
filter_wpan_src64(BR).\
|
||
filter_ipv6_dst(GUA1['MED']).\
|
||
must_next()
|
||
pkts.filter_ping_reply(identifier=_pkt.icmpv6.echo.identifier).\
|
||
filter_wpan_src64(MED).\
|
||
filter_ipv6_dst(GUA1['BR']).\
|
||
must_next()
|
||
|
||
# Step 5: MED sends an ICMPv6 Echo Request to Router_1 using GUA 2003::
|
||
# address
|
||
# The DUT MUST not send an Address Query as Router_1 address should
|
||
# be cached.
|
||
# The DUT MUST forward the ICMPv6 Echo Reply to MED
|
||
|
||
_pkt = pkts.filter_ping_request().\
|
||
filter_wpan_src64(MED).\
|
||
filter_ipv6_dst(GUA1['ROUTER_1']).\
|
||
must_next()
|
||
lstart = pkts.index
|
||
pkts.filter_ping_reply(identifier=_pkt.icmpv6.echo.identifier).\
|
||
filter_wpan_src64(ROUTER_1).\
|
||
filter_ipv6_dst(GUA1['MED']).\
|
||
must_next()
|
||
pkts.filter_ping_reply(identifier=_pkt.icmpv6.echo.identifier).\
|
||
filter_wpan_src64(ROUTER_2).\
|
||
filter_wpan_dst16(MED_RLOC16).\
|
||
must_next()
|
||
lend = pkts.index
|
||
pkts.range(lstart, lend).filter_wpan_src64(ROUTER_2).\
|
||
filter_RLARMA().\
|
||
filter_coap_request(ADDR_QRY_URI, port=MM).\
|
||
must_not_next()
|
||
|
||
# Step 6: MED sends an ICMPv6 Echo Request to Router_1 using GUA 2003::
|
||
# address
|
||
# The DUT MUST update its address cache and remove all entries
|
||
# based on Router_1’s Router ID.
|
||
# The DUT MUST send an Address Query to discover Router_1’s RLOC address.
|
||
|
||
pkts.filter_ping_request().\
|
||
filter_wpan_src64(MED).\
|
||
filter_ipv6_dst(GUA1['ROUTER_1']).\
|
||
must_next()
|
||
pkts.filter_wpan_src64(ROUTER_2).\
|
||
filter_RLARMA().\
|
||
filter_coap_request(ADDR_QRY_URI, port=MM).\
|
||
filter(lambda p: p.thread_address.tlv.target_eid == GUA1['ROUTER_1']).\
|
||
must_next()
|
||
|
||
# Step 7: Border Router sends two ICMPv6 Echo Requests to MED using GUA 2003::
|
||
# address
|
||
# The DUT MUST NOT respond with an Address Notification message
|
||
|
||
pkts.filter_wpan_src64(ROUTER_2).\
|
||
filter_ipv6_dst(BR_RLOC).\
|
||
filter_coap_request(ADDR_NTF_URI, port=MM).\
|
||
must_not_next()
|
||
pkts.filter_ping_request().\
|
||
filter_wpan_src64(BR).\
|
||
filter_ipv6_dst(GUA1['MED']).\
|
||
must_next()
|
||
|
||
|
||
if __name__ == '__main__':
|
||
unittest.main()
|