espressif/openthread
1
0
Fork 0
mirror of https://github.com/espressif/openthread.git synced 2026-09-27 11:27:36 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
thread-reference-20191113
openthread/examples/Makefile-nrf52811
T
Kamil Sroka e98de3f358 [nrf52840] use nrf_security for hardware accelerated cryptography (#4267) 
Previously simple CC310 cryptographic accelerator library was used
with the glue layer using MbedTLS _ALT function substitution mechanism.
This solution wasn't well tested from a security point of view.

The new cryptographic library is built from the nrf_security project:
https://github.com/NordicPlayground/nrfxlib/tree/master/nrf_security.
It provides both CC310 libraries with MbedTLS API and special glue layers
for situations where both hardware and software implementation is used
(i.e for AES as the hardware supports only 128bit keys so software is used
for 256bit keys).

The new library is based on the CC312 codebase in a version stated
to be ready for production, however the Nordic Semiconductor ASA
port to make the code base work for CC310 devices is currently given out
in an experimental state. The new library is based on CC312 codebase
because it introduces mbed TLS integration for HW cryptographic
features in Arm CryptoCell devices.
2019-11-04 06:46:03 -08:00

312 lines
10 KiB
Plaintext
Raw Permalink Blame History

#
# Copyright (c) 2019, The OpenThread Authors.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# 3. Neither the name of the copyright holder nor the
# names of its contributors may be used to endorse or promote products
# derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
.NOTPARALLEL:
AR = arm-none-eabi-ar
CCAS = $(CCPREFIX) arm-none-eabi-gcc
CPP = arm-none-eabi-cpp
CC = $(CCPREFIX) arm-none-eabi-gcc
CXX = $(CCPREFIX) arm-none-eabi-g++
LD = arm-none-eabi-ld
STRIP = arm-none-eabi-strip
NM = arm-none-eabi-nm
RANLIB = arm-none-eabi-ranlib
OBJCOPY = arm-none-eabi-objcopy
GCCVersion = $(shell expr `$(CC) -dumpversion | cut -f1 -d.`)
configure_OPTIONS = \
--enable-mtd \
--enable-linker-map \
--with-examples=nrf52811 \
MBEDTLS_CPPFLAGS="$(NRF52811_MBEDTLS_CPPFLAGS)" \
$(NULL)
ifdef SRC_PATH
configure_OPTIONS += --srcdir="$(SRC_PATH)"
endif
TopSourceDir := $(dir $(shell readlink $(firstword $(MAKEFILE_LIST))))..
AbsTopSourceDir := $(dir $(realpath $(firstword $(MAKEFILE_LIST))))..
NRF52811_MBEDTLS_CPPFLAGS = -DMBEDTLS_CONFIG_FILE='\"mbedtls-config.h\"'
NRF52811_MBEDTLS_CPPFLAGS += -DMBEDTLS_USER_CONFIG_FILE='\"nrf52811-mbedtls-config.h\"'
NRF52811_MBEDTLS_CPPFLAGS += -I$(AbsTopSourceDir)/third_party/mbedtls
NRF52811_MBEDTLS_CPPFLAGS += -I$(AbsTopSourceDir)/third_party/mbedtls/repo/include
NRF52811_MBEDTLS_CPPFLAGS += -I$(AbsTopSourceDir)/third_party/mbedtls/repo/include/mbedtls
NRF52811_MBEDTLS_CPPFLAGS += -I$(AbsTopSourceDir)/third_party/NordicSemiconductor/libraries/crypto
NRF52811_MBEDTLS_CPPFLAGS += -I$(AbsTopSourceDir)/third_party/NordicSemiconductor/libraries/nrf_security/mbedtls_plat_config
NRF52811_MBEDTLS_CPPFLAGS += -I$(AbsTopSourceDir)/third_party/NordicSemiconductor/nrfx/mdk
NRF52811_MBEDTLS_CPPFLAGS += -I$(AbsTopSourceDir)/third_party/NordicSemiconductor/cmsis
NRF52811_MBEDTLS_CPPFLAGS += -DNRF52811_XXAA
NRF52811_CONFIG_FILE_CPPFLAGS = -DOPENTHREAD_PROJECT_CORE_CONFIG_FILE='\"openthread-core-nrf52811-config.h\"'
NRF52811_CONFIG_FILE_CPPFLAGS += -DOPENTHREAD_CORE_CONFIG_PLATFORM_CHECK_FILE='\"openthread-core-nrf52811-config-check.h\"'
NRF52811_CONFIG_FILE_CPPFLAGS += -I$(AbsTopSourceDir)/examples/platforms/nrf528xx/nrf52811
COMMONCFLAGS := \
-fdata-sections \
-ffunction-sections \
-Os \
-g \
$(NRF52811_CONFIG_FILE_CPPFLAGS) \
$(NULL)
include $(dir $(abspath $(lastword $(MAKEFILE_LIST))))/common-switches.mk
ifeq ($(DCDC),1)
COMMONCFLAGS += -DDCDC_ENABLE
endif
#
# Select transport which CLI, NCP and RCP examples will use to communicate.
# To disable all transports use the DISABLE_TRANSPORTS switch. This will disable
# the build of all above examples.
# If NCP_SPI switch is set, only NCP and RCP examples will be built.
# Otherwise, the default serial transport is UART.
#
ifndef DISABLE_TRANSPORTS
configure_OPTIONS += --enable-ncp
configure_OPTIONS += --enable-radio-only
ifeq ($(NCP_SPI),1)
COMMONCFLAGS += -DSPIS_AS_SERIAL_TRANSPORT=1
COMMONCFLAGS += -DOPENTHREAD_CONFIG_NCP_SPI_ENABLE=1
else
COMMONCFLAGS += -DUART_AS_SERIAL_TRANSPORT=1
COMMONCFLAGS += -DOPENTHREAD_CONFIG_NCP_UART_ENABLE=1
configure_OPTIONS += --enable-cli
endif # NCP_SPI == 1
endif # DISABLE_TRANSPORTS
NRF52811_MBEDTLS_CPPFLAGS += -DDISABLE_CC310=1
ifeq ($(shell expr $(GCCVersion) \>= 7), 1)
COMMONCFLAGS += -Wno-expansion-to-defined
endif
CPPFLAGS += \
$(COMMONCFLAGS) \
$(target_CPPFLAGS) \
$(NULL)
CFLAGS += \
$(COMMONCFLAGS) \
$(target_CFLAGS) \
$(NULL)
CXXFLAGS += \
$(COMMONCFLAGS) \
$(target_CXXFLAGS) \
-fno-exceptions \
-fno-rtti \
$(NULL)
LDFLAGS += \
$(COMMONCFLAGS) \
$(target_LDFLAGS) \
-specs=nano.specs \
-specs=nosys.specs \
-Wl,--gc-sections \
$(NULL)
CCASFLAGS += \
$(COMMONCCASFLAGS) \
$(target_CCASFLAGS) \
-x \
assembler-with-cpp \
$(NULL)
ECHO := @echo
MAKE := make
MKDIR_P := mkdir -p
LN_S := ln -s
RM_F := rm -f
INSTALL := /usr/bin/install
INSTALLFLAGS := -p
BuildPath = build
TopBuildDir = $(BuildPath)
AbsTopBuildDir = $(PWD)/$(TopBuildDir)
ResultPath = output
TopResultDir = $(ResultPath)
AbsTopResultDir = $(PWD)/$(TopResultDir)
TargetTuple = nrf52811
ARCHS = cortex-m4
TopTargetLibDir = $(TopResultDir)/$(TargetTuple)/lib
ifndef BuildJobs
BuildJobs := $(shell getconf _NPROCESSORS_ONLN)
endif
JOBSFLAG := -j$(BuildJobs)
#
# configure-arch <arch>
#
# Configure OpenThread for the specified architecture.
#
# arch - The architecture to configure.
#
define configure-arch
$(ECHO) " CONFIG $(TargetTuple)..."
(cd $(BuildPath)/$(TargetTuple) && $(AbsTopSourceDir)/configure \
INSTALL="$(INSTALL) $(INSTALLFLAGS)" \
CPP="$(CPP)" CC="$(CC)" CXX="$(CXX)" CCAS="$(CCAS)" OBJC="$(OBJC)" OBJCXX="$(OBJCXX)" AR="$(AR)" RANLIB="$(RANLIB)" NM="$(NM)" STRIP="$(STRIP)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" CXXFLAGS="$(CXXFLAGS)" CCASFLAGS="$(CCASFLAGS)" LDFLAGS="$(LDFLAGS)" \
--host=arm-none-eabi \
--prefix=/ \
--exec-prefix=/$(TargetTuple) \
$(configure_OPTIONS))
endef # configure-arch
#
# build-arch <arch>
#
# Build the OpenThread intermediate build products for the specified
# architecture.
#
# arch - The architecture to build.
#
define build-arch
$(ECHO) " BUILD $(TargetTuple)"
$(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(TargetTuple) --no-print-directory \
all
endef # build-arch
#
# stage-arch <arch>
#
# Stage (install) the OpenThread final build products for the specified
# architecture.
#
# arch - The architecture to stage.
#
define stage-arch
$(ECHO) " STAGE $(TargetTuple)"
$(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(TargetTuple) --no-print-directory \
DESTDIR=$(AbsTopResultDir) \
install
endef # stage-arch
#
# ARCH_template <arch>
#
# Define macros, targets and rules to configure, build, and stage the
# OpenThread for a single architecture.
#
# arch - The architecture to instantiate the template for.
#
define ARCH_template
CONFIGURE_TARGETS += configure-$(1)
BUILD_TARGETS += do-build-$(1)
STAGE_TARGETS += stage-$(1)
BUILD_DIRS += $(BuildPath)/$(TargetTuple)
DIRECTORIES += $(BuildPath)/$(TargetTuple)
configure-$(1): target_CPPFLAGS=$($(1)_target_CPPFLAGS)
configure-$(1): target_CFLAGS=$($(1)_target_CFLAGS)
configure-$(1): target_CXXFLAGS=$($(1)_target_CXXFLAGS)
configure-$(1): target_LDFLAGS=$($(1)_target_LDFLAGS)
configure-$(1): target_CCASFLAGS=$($(1)_target_CCASFLAGS)
configure-$(1): $(BuildPath)/$(TargetTuple)/config.status
$(BuildPath)/$(TargetTuple)/config.status: | $(BuildPath)/$(TargetTuple)
$$(call configure-arch,$(1))
do-build-$(1): configure-$(1)
do-build-$(1):
+$$(call build-arch,$(1))
stage-$(1): do-build-$(1)
stage-$(1): | $(TopResultDir)
$$(call stage-arch,$(1))
$(1): stage-$(1)
endef # ARCH_template
.DEFAULT_GOAL := all
all: stage
#
# Cortex-m4
#
cortex-m4_target_ABI = cortex-m4
cortex-m4_target_CPPFLAGS = -mcpu=cortex-m4 -mfloat-abi=soft -mthumb -mabi=aapcs
cortex-m4_target_CFLAGS = -mcpu=cortex-m4 -mfloat-abi=soft -mthumb -mabi=aapcs
cortex-m4_target_CXXFLAGS = -mcpu=cortex-m4 -mfloat-abi=soft -mthumb -mabi=aapcs
cortex-m4_target_LDFLAGS = -mcpu=cortex-m4 -mfloat-abi=soft -mthumb -mabi=aapcs
# Instantiate an architecture-specific build template for each target
# architecture.
$(foreach arch,$(ARCHS),$(eval $(call ARCH_template,$(arch))))
#
# Common / Finalization
#
configure: $(CONFIGURE_TARGETS)
build: $(BUILD_TARGETS)
stage: $(STAGE_TARGETS)
DIRECTORIES = $(TopResultDir) $(TopResultDir)/$(TargetTuple)/lib $(BUILD_DIRS)
CLEAN_DIRS = $(TopResultDir) $(BUILD_DIRS)
all: stage
$(DIRECTORIES):
$(ECHO) " MKDIR $@"
@$(MKDIR_P) "$@"
clean:
$(ECHO) " CLEAN"
@$(RM_F) -r $(CLEAN_DIRS)
help:
$(ECHO) "Simply type 'make -f $(firstword $(MAKEFILE_LIST))' to build OpenThread for the following "
$(ECHO) "architectures: "
$(ECHO) ""
$(ECHO) " $(ARCHS)"
$(ECHO) ""
$(ECHO) "To build only a particular architecture, specify: "
$(ECHO) ""
$(ECHO) " make -f $(firstword $(MAKEFILE_LIST)) <architecture>"
$(ECHO) ""
Reference in New Issue View Git Blame Copy Permalink