Add support to handle Data Length change event

nimble/host/include/host/ble_gap.h

@@ -160,7 +160,7 @@ struct hci_conn_update;
 #define BLE_GAP_EVENT_REATTEMPT_COUNT       31
 #define BLE_GAP_EVENT_AUTHORIZE             32
 #define BLE_GAP_EVENT_TEST_UPDATE           33
-
+#define BLE_GAP_EVENT_DATA_LEN_CHG          34
 
 /* DTM events */
 #define BLE_GAP_DTM_TX_START_EVT            0
@@ -1246,6 +1246,29 @@ struct ble_gap_event {
 	     */
             uint16_t num_pkt;
 	} dtm_state;
+
+        /**
+	 * Represent an event for LE Data length change
+	 *
+	 * Valid for the following event types:
+	 *      o BLE_GAP_EVENT_DATA_LEN_CHG
+	 */
+	struct {
+            /* Connection handle */
+	    uint16_t conn_handle;
+
+	    /* Max Tx Payload octotes */
+	    uint16_t max_tx_octets;
+
+	    /* Max Tx Time */
+	    uint16_t max_tx_time;
+
+	    /* Max Rx payload octet */
+	    uint16_t max_rx_octets;
+
+	    /* Max Rx Time */
+	    uint16_t max_rx_time;
+	} data_len_chg;
     };
 };
 

nimble/host/src/ble_gap.c

@@ -2289,6 +2289,25 @@ ble_gap_rx_phy_update_complete(const struct ble_hci_ev_le_subev_phy_update_compl
 #endif
 }
 
+void
+ble_gap_rx_data_len_change(const struct ble_hci_ev_le_subev_data_len_chg *ev)
+{
+#if NIMBLE_BLE_CONNECT
+    struct ble_gap_event event;
+    uint16_t conn_handle = le16toh(ev->conn_handle);
+
+    memset(&event, 0, sizeof event);
+    event.type = BLE_GAP_EVENT_DATA_LEN_CHG;
+    event.data_len_chg.max_tx_octets = le16toh(ev->max_tx_octets);
+    event.data_len_chg.max_rx_octets = le16toh(ev->max_rx_octets);
+    event.data_len_chg.max_tx_time = le16toh(ev->max_tx_time);
+    event.data_len_chg.max_rx_time = le16toh(ev->max_rx_time);
+
+    ble_gap_event_listener_call(&event);
+    ble_gap_call_conn_event_cb(&event, conn_handle);
+#endif
+}
+
 static int32_t
 ble_gap_master_timer(void)
 {

nimble/host/src/ble_gap_priv.h

@@ -164,6 +164,8 @@ int ble_gap_dbg_update_active(uint16_t conn_handle);
 void ble_gap_reattempt_count(uint16_t conn_handle, uint8_t count);
 #endif
 
+void ble_gap_rx_data_len_change(const struct ble_hci_ev_le_subev_data_len_chg *ev);
+
 #ifdef __cplusplus
 }
 #endif

nimble/host/src/ble_hs_hci_evt.c

@@ -78,6 +78,7 @@ static ble_hs_hci_evt_le_fn ble_hs_hci_evt_le_conn_complete;
 static ble_hs_hci_evt_le_fn ble_hs_hci_evt_le_conn_upd_complete;
 static ble_hs_hci_evt_le_fn ble_hs_hci_evt_le_lt_key_req;
 static ble_hs_hci_evt_le_fn ble_hs_hci_evt_le_conn_parm_req;
+static ble_hs_hci_evt_le_fn ble_hs_hci_evt_le_data_len_change;
 static ble_hs_hci_evt_le_fn ble_hs_hci_evt_le_phy_update_complete;
 static ble_hs_hci_evt_le_fn ble_hs_hci_evt_le_enh_conn_complete;
 #endif
@@ -149,6 +150,7 @@ static ble_hs_hci_evt_le_fn * const ble_hs_hci_evt_le_dispatch[] = {
     [BLE_HCI_LE_SUBEV_CONN_UPD_COMPLETE] = ble_hs_hci_evt_le_conn_upd_complete,
     [BLE_HCI_LE_SUBEV_LT_KEY_REQ] = ble_hs_hci_evt_le_lt_key_req,
     [BLE_HCI_LE_SUBEV_REM_CONN_PARM_REQ] = ble_hs_hci_evt_le_conn_parm_req,
+    [BLE_HCI_LE_SUBEV_DATA_LEN_CHG] = ble_hs_hci_evt_le_data_len_change,
     [BLE_HCI_LE_SUBEV_ENH_CONN_COMPLETE] = ble_hs_hci_evt_le_enh_conn_complete,
 #endif
     [BLE_HCI_LE_SUBEV_DIRECT_ADV_RPT] = ble_hs_hci_evt_le_dir_adv_rpt,
@@ -1040,6 +1042,22 @@ ble_hs_hci_evt_le_phy_update_complete(uint8_t subevent, const void *data,
 
     return 0;
 }
+
+static int
+ble_hs_hci_evt_le_data_len_change(uint8_t subevent, const void *data,
+				  unsigned int len)
+{
+    const struct ble_hci_ev_le_subev_data_len_chg *ev = data;
+
+    if (len != sizeof(*ev)) {
+        return BLE_HS_ECONTROLLER;
+    }
+
+    ble_gap_rx_data_len_change(ev);
+
+    return 0;
+
+}
 #endif
 
 int