[nrf528xx] add NRFX timer configuration to sdk_config.h (#4288)

third_party/NordicSemiconductor/dependencies/sdk_config.h

@@ -766,6 +766,151 @@
 
 // </e>
 
+// <e> NRFX_TIMER_ENABLED - nrfx_timer - TIMER periperal driver
+//==========================================================
+#ifndef NRFX_TIMER_ENABLED
+#define NRFX_TIMER_ENABLED 1
+#endif
+// <q> NRFX_TIMER0_ENABLED  - Enable TIMER0 instance
+
+
+#ifndef NRFX_TIMER0_ENABLED
+#define NRFX_TIMER0_ENABLED 1
+#endif
+
+// <q> NRFX_TIMER1_ENABLED  - Enable TIMER1 instance
+
+
+#ifndef NRFX_TIMER1_ENABLED
+#define NRFX_TIMER1_ENABLED 1
+#endif
+
+// <q> NRFX_TIMER2_ENABLED  - Enable TIMER2 instance
+
+
+#ifndef NRFX_TIMER2_ENABLED
+#define NRFX_TIMER2_ENABLED 1
+#endif
+
+// <q> NRFX_TIMER3_ENABLED  - Enable TIMER3 instance
+
+
+#ifndef NRFX_TIMER3_ENABLED
+#define NRFX_TIMER3_ENABLED 1
+#endif
+
+// <q> NRFX_TIMER4_ENABLED  - Enable TIMER4 instance
+
+
+#ifndef NRFX_TIMER4_ENABLED
+#define NRFX_TIMER4_ENABLED 1
+#endif
+
+// <o> NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY  - Timer frequency if in Timer mode
+
+// <0=> 16 MHz
+// <1=> 8 MHz
+// <2=> 4 MHz
+// <3=> 2 MHz
+// <4=> 1 MHz
+// <5=> 500 kHz
+// <6=> 250 kHz
+// <7=> 125 kHz
+// <8=> 62.5 kHz
+// <9=> 31.25 kHz
+
+#ifndef NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY
+#define NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY 0
+#endif
+
+// <o> NRFX_TIMER_DEFAULT_CONFIG_MODE  - Timer mode or operation
+
+// <0=> Timer
+// <1=> Counter
+
+#ifndef NRFX_TIMER_DEFAULT_CONFIG_MODE
+#define NRFX_TIMER_DEFAULT_CONFIG_MODE 0
+#endif
+
+// <o> NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH  - Timer counter bit width
+
+// <0=> 16 bit
+// <1=> 8 bit
+// <2=> 24 bit
+// <3=> 32 bit
+
+#ifndef NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH
+#define NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH 0
+#endif
+
+// <o> NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+
+// <0=> 0 (highest)
+// <1=> 1
+// <2=> 2
+// <3=> 3
+// <4=> 4
+// <5=> 5
+// <6=> 6
+// <7=> 7
+
+#ifndef NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 7
+#endif
+
+// <e> NRFX_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_TIMER_CONFIG_LOG_ENABLED
+#define NRFX_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+
+// <0=> Off
+// <1=> Error
+// <2=> Warning
+// <3=> Info
+// <4=> Debug
+
+#ifndef NRFX_TIMER_CONFIG_LOG_LEVEL
+#define NRFX_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+
+// <0=> Default
+// <1=> Black
+// <2=> Red
+// <3=> Green
+// <4=> Yellow
+// <5=> Blue
+// <6=> Magenta
+// <7=> Cyan
+// <8=> White
+
+#ifndef NRFX_TIMER_CONFIG_INFO_COLOR
+#define NRFX_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+
+// <0=> Default
+// <1=> Black
+// <2=> Red
+// <3=> Green
+// <4=> Yellow
+// <5=> Blue
+// <6=> Magenta
+// <7=> Cyan
+// <8=> White
+
+#ifndef NRFX_TIMER_CONFIG_DEBUG_COLOR
+#define NRFX_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
 // <q> SYSTICK_ENABLED  - nrf_drv_systick - SysTick driver
 
 #if (USB_CDC_AS_SERIAL_TRANSPORT == 1)