This commit:
- Add callback for Domain Prefix events
- Add callback for ND Proxy events
- Add corresponding test to verify ND Proxy works
- Some misc enhancements to the Backbone tests
- Run sudo modprobe ip6table_filter in Docker host so that ip6tables
works in ubuntu docker instances.
- Use -DOTBR_REST=OFF -DOTBR_WEB=OFF for building OTBR Docker image
since these features are not used in tests.
- Setup radvd on Host to send Router Advertisements for the Domain
Prefix using configuration: AdvOnLink on; AdvAutonomous off;
AdvRouterAddr off;
- Set sysctl net.ipv6.conf.eth0.accept_ra=2 for BBR and Host
This commit implements DUA features of Thread 1.2 DUA that involves
sending and processing Backbone query and answer:
- Extend address query to the Backbone Link
- Send BB.qry for Thread address query
- Send ADDR_ANS.ntf for BB.ans
- DAD process
- PBBR to send BB.qry on the Backbone link (3 times if not answered)
- PBBR to receive and handle BB.qry and sends BB.ans
- PBBR to receive BB.ans and sends ADDR_ERR.ntf if duplicated
- PRO_BB.ntf
- Send PRO_BB.ntf when DUA registration is updated
- Handle PRO_BB.ntf
- Add test_dua_dad.py to test the DAD process when it was successful
or duplicated
- Verify the normal DAD process
- Verify Address Query can be extended to the Backbone link
- Verify DAD duplicate is handled correctly
- Verify PRO_BB.ntf for duplicated DUA is handled correctly
This commit implements the Forward Tracking Series feature in Link Metrics.
- Two new apis are added:
- otLinkMetricsSendMgmtRequestForwardTrackingSeries, which is used
to send an MLE Link Metrics Management Request
- otLinkMetricsSendLinkProbe, which is used to send an MLE Link Probe
- A new class LinkMetricsSeriesInfo is used to maintain the data of
one Series configured by a neighbor. This class inherits
LinkedListEntry and each Neighbor has a list of
LinkMetricsSeriesInfo. All LinkedListEntrys are allocated and freed
by a Pool in LinkMetrics.
- To specify SeriesFlags in cli command for Forward Tracking Series, a
similar approach with LinkMetricsFlags is used. Another character
flags is used to represent SeriesFlags.
- Whenever the node receives a frame (including ACK) from a neighbor,
it would call Neighbor::AggregateLinkMetrics which goes through each
LinkMetricsSeriesInfo entry in the neighbor's list and aggregate the
data if the frame type matches the entry.
- Two test scripts are added to test this function:
- v1_2_LowPower_7_2_01_ForwardTrackingSeries.py
- v1_2_LowPower_test_forward_tracking_series.py
- backbone/test_mlr_multicast_routing.py verifies the basic features
of Backbone multicast routing
- backbone/test_mlr_multicast_routing_timeout.py verifies that MLR
timeout works
- backbone/test_mlr_multicast_routing_commissioner_timeout.py verifies
that Commissioner MLR timeout works
This commit enhances Backbone TMF:
- Subscribe Backbone TMF on multicast addresses on the Backbone
interface
- All Network BBRs Multicast Address
- All Domain BBRs Multicast Address
- Thread Netif no longer subscribe these two addresses, because BBR
Multicast Addresses are only defined for the Backbone Link in Thread
Spec 9.4.8.1
- Make sure backbone messages are using link local src addresses
- Verify src addr for b/bmr messages
Currently, the WELLKNOWN_NODE_ID = 34 is not properly defined.
- In virtual time simulation, WELLKNOWN_NODE_ID limits the number of
ports each PORT_OFFSET can occupy. The virtual time simulator
listens at the nodeid=0 port rather than nodeid=34 port. So, there
is no such thing as wellknown node ID in virtual time simulation.
- In real time simulation, the sniffer listens at the nodeid=34
port. This PR changes it to nodeid=0 port to be consistent with
other parts.
- In posix virtual time, the simulator listens at the nodeid=0
port. So, there is no such thing as wellknown node ID in Posix
virtual time.
This commit changes it to MAX_NETWORK_SIZE = 33 and make it
(configuration OPENTHREAD_SIMULATION_MAX_NETWORK_SIZE) configurable in
simulation by:
- Makefile configuration: MAX_NETWORK_SIZE
- Cmake configuration: OT_SIMULATION_MAX_NETWORK_SIZE
- Check source address of packets from users
- Determine anycast address by MLE API for accuracy
- Replace anycast address with a valid unicast address when sending
with platform UDP in UDP layer
- Replace anycast address with a valid unicast address in IP layer
For 8.x.x, there is validation that joiner has the same keys as the
commissioner after commissioning, it should be configured with a
different master key before start commissioning.
This command allows an Rx-Off-When-Idle device to send an empty mac
data frame or mac datarequest to its parent. This command is only used
for certification.
This commit enhances Backbone Router to send BMLR.ntf on the backbone
link for Multicast Listeners.
- Send BMLR.ntf to the Backbone link
- Add Backbone test with packet verification
- Includes some revision to the Thread 1.2 Backbone CI scripts to make
it more stable
Jing Ma