Files
openthread/tests/nexus/test_1_2_MATN_TC_22.cpp
Abtin Keshavarzian 064529cbfc [nexus] add helper to allow link between nodes in nexus (#12906)
Added `Core::AllowLinkBetween()` and `Core::UnallowLinkBetween()`
helper methods to the Nexus test platform. These methods simplify
establishing bidirectional links between nodes in simulation tests by
handling the reciprocal `AllowList()` calls in a single step.

Updated various Nexus test cases to utilize these new helpers,
replacing manual bidirectional `AllowList()` calls. This change
reduces verbosity and ensures consistency in how links are established
in the test topology.
2026-04-17 13:22:27 -05:00

189 lines
6.4 KiB
C++
Raw Permalink Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
/*
* Copyright (c) 2026, The OpenThread Authors.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <stdio.h>
#include "platform/nexus_core.hpp"
#include "platform/nexus_node.hpp"
namespace ot {
namespace Nexus {
/**
* Time to advance for a node to form a network and become leader, in milliseconds.
*/
static constexpr uint32_t kFormNetworkTime = 10 * 1000;
/**
* Time to advance for a node to join as a router, in milliseconds.
*/
static constexpr uint32_t kAttachToRouterTime = 200 * 1000;
/**
* Time to advance for the network to stabilize, in milliseconds.
*/
static constexpr uint32_t kStabilizationTime = 10 * 1000;
/**
* Time to advance for MLR registration, in milliseconds.
*/
static constexpr uint32_t kMlrRegistrationTime = 5 * 1000;
/**
* MLR Timeout Minimum value in seconds.
*/
static constexpr uint32_t kMlrTimeoutMin = 300;
/**
* Low MLR Timeout value in seconds.
*/
static constexpr uint32_t kMlrTimeoutLow = kMlrTimeoutMin / 4;
/**
* Multicast address MA1.
*/
static const char kMA1[] = "ff04::1234:777a:1";
void TestMatnTc22(void)
{
/**
* 5.10.18 MATN-TC-22: Use of low MLR timeout defaults to MLR_TIMEOUT_MIN
*
* 5.10.18.1 Topology
* - BR_1
* - TD (DUT)
*
* 5.10.18.2 Purpose & Description
* The purpose of this test case is to verify that a Primary BBR that is configured with a low value of MLR timeout
* (< MLR_TIMEOUT_MIN) is interpreted as using an MLR timeout of MLR_TIMEOUT_MIN by all the Thread Devices (DUT).
*
* Valid DUT Roles:
* - DUT as TD (FED, REED or Router)
*
* Required Devices and Topology:
* - BR_1: Test bed BR device operating as the Primary BBR.
* - TD (DUT): Device operating as a Thread FTD (FED, REED or Router).
*
* Initial Conditions:
* - P1: BR_1 MLR timeout value to configured to of BR_1 to be (MLR_TIMEOUT_MIN / 4) seconds.
*
* Spec Reference | V1.2 Section | V1.3.0 Section
* -----------------|--------------|---------------
* Multicast | 5.10.18 | 5.10.18
*/
Core nexus;
Node &br1 = nexus.CreateNode();
Node &dut1 = nexus.CreateNode(); // Router
Node &dut2 = nexus.CreateNode(); // FED
Ip6::Address ma1;
br1.SetName("BR_1");
dut1.SetName("DUT_Router");
dut2.SetName("DUT_FED");
SuccessOrQuit(ma1.FromString(kMA1));
nexus.AdvanceTime(0);
SuccessOrQuit(Instance::SetGlobalLogLevel(kLogLevelNote));
/**
* Step 0
* - Device: N/A
* - Description: Topology formation – BR_1. Topology addition – TD (DUT). Boot the DUT. Configure the DUT to
* register multicast address, MA1, at its parent.
* - Pass Criteria:
* - N/A
*/
Log("Step 0: Topology formation – BR_1. Topology addition – TD (DUT_Router and DUT_FED). DUTs register MA1.");
AllowLinkBetween(br1, dut1);
AllowLinkBetween(br1, dut2);
br1.Form();
nexus.AdvanceTime(kFormNetworkTime);
VerifyOrQuit(br1.Get<Mle::Mle>().IsLeader());
br1.Get<BorderRouter::InfraIf>().Init(1, true);
br1.Get<BorderRouter::RoutingManager>().Init();
SuccessOrQuit(br1.Get<BorderRouter::RoutingManager>().SetEnabled(true));
br1.Get<BackboneRouter::Local>().SetEnabled(true);
/** Configure BR_1 with low MLR timeout. */
{
BackboneRouter::Config config;
br1.Get<BackboneRouter::Local>().GetConfig(config);
config.mMlrTimeout = kMlrTimeoutLow;
SuccessOrQuit(br1.Get<BackboneRouter::Local>().SetConfig(config));
}
dut1.Join(br1, Node::kAsFtd);
dut2.Join(br1, Node::kAsFed);
nexus.AdvanceTime(kAttachToRouterTime);
VerifyOrQuit(dut1.Get<Mle::Mle>().IsRouter());
VerifyOrQuit(dut2.Get<Mle::Mle>().IsChild());
nexus.AdvanceTime(kStabilizationTime);
VerifyOrQuit(br1.Get<BackboneRouter::Local>().IsPrimary());
nexus.AddTestVar("MA1", kMA1);
nexus.AddTestVar("MLR_TIMEOUT_MIN", kMlrTimeoutMin);
SuccessOrQuit(dut1.Get<Ip6::Netif>().SubscribeExternalMulticast(ma1));
SuccessOrQuit(dut2.Get<Ip6::Netif>().SubscribeExternalMulticast(ma1));
nexus.AdvanceTime(kMlrRegistrationTime);
/**
* Step 1
* - Device: TD (DUT)
* - Description: Within MLR_TIMEOUT_MIN seconds of initial registration, the device automatically re-registers for
* multicast address, MA1, at BR_1.
* - Pass Criteria:
* - The DUT MUST re-register for multicast address, MA1, at BR_1.
* - The re-registration MUST occur within the time MLR_TIMEOUT_MIN seconds since initial registration.
* - No more than 2 re-registrations MUST occur within this time.
*/
Log("Step 1: Within MLR_TIMEOUT_MIN seconds, DUT re-registers for MA1.");
nexus.AdvanceTime(kMlrTimeoutMin * 1000);
nexus.SaveTestInfo("test_1_2_MATN_TC_22.json");
}
} // namespace Nexus
} // namespace ot
int main(void)
{
ot::Nexus::TestMatnTc22();
printf("All tests passed\n");
return 0;
}