Commit adds check if commissioning is possible and if the tcat device is already commissioned.
Adds advertisement update on disconnected and role change.
Fixes key handling for key references.
Fixes the authorization processing.
Implements recent changes of the application TLVs.
Added comprehensive Python virtual environment setup guide to the
cp-caps README.md file.
This includes detailed sections for creation, activation, dependency
installation, and deactivation of virtual environments to help users
properly set up their testing environment and avoid package conflicts.
With Thread 1.4 the cli application not can also (dns) resolve
IPv4 addresses. This commit adds the same support in otci
* dns_resolve4
Implements support for vendor operations in otci get/set
* vendor_name
* vendor_model
* vendor_sw_version
Implements network diagnostic commands
* get
* reset
* non_preferred_channels
Various other (small changes)"
* allow setting read timeout on serial connections
* allow replacing read routine filter
* expose latest thread versions in the public module api
* expand the definition of dns_get_config
* replaces mgmtget/mgmtset with the correct mgmtgetcommand and mgmtsetcommand
* replaces addressmode with the correct addrmode
* adds an `ignore_result` option to `execute_command`
* adds a missing `diag` command
* removes some unexisting getters
This commit refactors the cp-caps test as follows:
1. uses the unittest framework to refactor the cp-caps.
2. all tests are sorted alphabetically
3. all test names are changed to long names.
When running the command `diag receive 1 rlp`, the DUT may fail to
receive the frame, then the otci will try the command again and
again. These retries are useless, and they will take lots of time
before timeout.
This commit sets the number of retry to 0 before executing the
command, and restore the number of retry after the command is
executed. This commit also captures the timeout exception from the
adb_shell.
Commit adds implementation of:
- 0x40 Tcat tlv extraction of active dataset,
- 0x25 Tcat tlv extraction of commissioner certificate.
Includes also refactoring of `BleCommand` adds new method `process_response`.
This simplifies:
- `GetPskdHash`
- `GetRandomNumberChallenge`
The original code counts the number of received frames to check
whether the specified frame format is supported. It doesn't check
whether the sent and the received frames are the same. The test
results may have some deviation.
This commit compares the sent and received frame to check whether the
specified frame format is supported. This commit also add a case to
test the wake-up frame format.
`TransmitPacket()` should return an error from platform Radio
implementation, as for example Radio can be in incorrect state.
If error occurs, increase `mSentErrorInvalidStatePackets` stat.
Add wrong state case to tests and fix `diag repeat stop` called
too lata.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
The original `diag send` command is an asynchronous command. Users
must wait for a certain period of time and then run the `diag stats`
command to query how many packets have been sent to know whether all
packets have been sent. This is very inefficient, and it is not
convenient for scripts to process this command.
This commit changes the command `diag send` from an asynchronous
command to a synchronous command, and add the asynchronous command
`diag send async`.
This commit adds 'tlv' command tree to the BBTC CLI.
The 'tlv' command has two subcommands: 'list' and 'send'.
The 'tlv list' prints available TLVs types that can be used in the 'send' subcommand.
The 'tlv send <TLV_TYPE> <TLV_PAYLOAD>' allows sending specific TLV with arbitrary payloads.
Example:
`tlv send a 1234`
Send ping TLV(0x0a) with payload '1234'
The 'tlv' command tree is to gain the ability to send the TLV with any payload at any time.
This feature allows to check the behavior of TCAT device against:
- receiving of unexpected TLV
- receiving of TLV with corrupted payload
- receiving of TLVs sent in custom order
When configuration file defined in build parameter(command line argument),
ot-fct is wound't take into an account and accessed default path.
This commit fixes to access configuration file from path which is
defined from build command line parameter. Also, it fixes some
compilation issues while building from ot-br-posix.
Signed-off-by: ashish <ashish.vara@nxp.com>
When using the `diag frame -c xxxx` command to enable the CSMA-CA when
transmitting the frame, the command `diag send` won't output any message
the CCA failure happens. It is difficult for users to know whether
the CSMA-CA is actually effective via diag commands.
This commit counts the number of packets that are sent succeed and failed,
outputs the transmision failure reason and do not re-transmit the frame
after it fails to send.
The parameters of the method dataset_set_buffer() has been updated, but the
method create_dataset() still use previous defination of dataset_set_buffer().
It causes the crash when calling the method create_dataset().
This commit extends the 'dataset hex' command in the bbtc.py script by
allowing dataset TLVs to be set using a hex-encoded format.
Till now the 'dataset hex' command was only printing the
'ThreadDataset' object values in hex-encoded format, there was no
functionality to set the TLVs using hex-encoded format.
The 'dataset hex' command has been modified so the user can pass
dataset TLVs in hex-encoded format as an argument to this
command. This enables the script to set desired dataset TLVs in one
command, instead of calling dataset commands individually.
Example usage: 'dataset hex <hex-encoded TLVs>'
Added 'clear' command to the 'dataset' command tree. This allows to
remove all entries in the 'ThreadDataset' object used by the script to
store the dataset values.
The reason behind this feature is that in the current implementation
of the script, the 'ThreadDataset' object entries are always
initialized by 'initial_dataset' when running the script.
No command allows to clear/remove the particular entry, which makes
this script unable to send an active dataset to the target device
without specific dataset values(custom dataset).
To make this possible, the 'clear' command has been added to the
'dataset' command tree, which removes all entries from the
'ThreadDataset' object and, by using existing commands, sets the
desired entries in the 'ThreadDataset' object from scratch.
This enables the script to send custom active dataset values to the
target device.
Added '-a', '--adapter' arguments to the bbtc.py arguments
parser. This allows the selection of the HCI adapter for the scanning
procedure.
According to 'Bleak' documentation of the 'BleakClient'
class(https://bleak.readthedocs.io/en/latest/api/client.html#bleakclient-class),
it's better to use the 'BLEDevice' object in 'BleakClient' during the
object instantiation, therefore it has been changed for the scanning
Commit introduces implementation of missing general class commands:
- PresentPskdHash
- PresentPskcHash
- PresentInstallCodeHash
- RequestRandomNumChallenge
- RequestPskdHash
Also include minor fixes in Tcat python client and refactoring of expect
tests for tcat.
- Add Wake-up Channel TLV to the dataset.
- Add CLI support to handle the wake-up channel.
- Add MAC support for wake-up channel (to be used for sending
and receiving wake-up frames).
- Fixes to connection state management and handling of Disconnect
command TLV
- specifically, this now ensures that TCAT remains on (started)
after a commissioner disconnects. Earlier, there was the problem
that the 2nd commissioner couldn't connect anymore.
- specifically, in ble_secure.cpp the check for if
(mTcatAgent.IsEnabled()) is removed, since the err =
mTcatAgent.Connected(mTls) will already check this and raise an
error if not enabled. If not enabled, the Device is in a wrong
state to handle TCAT Commissioner commands so now it closes the
connection right away. That's better than to leave the
Commissioner in limbo on the TLS connection. The Commissioner can
now retry again and all will be well again.
- timeout of at most 10 seconds on UDP write operation in simulation
mode (if longer, the TCAT device isn't reachable and the
Commissioner now shows the error to the user.) Earlier, it got stuck
forever.
- Corrects some copy/paste errors in API definitions in comments; adds
comments where needed to explain.
- adds whitespace at some places to align format with rest of code
- improved some of the --debug output for the UDP simulation mode of
the TCAT Commissioner.
arnulfrupp