mirror of
https://github.com/espressif/openthread.git
synced 2026-06-06 05:24:51 +00:00
Thomas
f42af4e2ee
With Thread 1.4 the cli application not can also (dns) resolve IPv4 addresses. This commit adds the same support in otci * dns_resolve4 Implements support for vendor operations in otci get/set * vendor_name * vendor_model * vendor_sw_version Implements network diagnostic commands * get * reset * non_preferred_channels Various other (small changes)" * allow setting read timeout on serial connections * allow replacing read routine filter * expose latest thread versions in the public module api * expand the definition of dns_get_config * replaces mgmtget/mgmtset with the correct mgmtgetcommand and mgmtsetcommand * replaces addressmode with the correct addrmode * adds an `ignore_result` option to `execute_command` * adds a missing `diag` command * removes some unexisting getters
1.4 KiB
1.4 KiB
OpenThread Control Interface
The OpenThread Control Interface (OTCI) is a library which provides uniform Python interfaces to connect and control various kinds of devices running OpenThread.
Supported device types
- OpenThread CLI
- SOC device via Serial
- OpenThread NCP (limited support via pyspinel)
- SOC device via Serial
- OpenThread Border Router
- OTBR device via SSH
Example
import otci
# Connect to an OTBR device via SSH
node1 = otci.connect_otbr_ssh("192.168.1.101")
# Connect to an OpenThread CLI device via Serial
node2 = otci.connect_cli_serial("/dev/ttyACM0"))
# Start node1 and wait for it to become the Leader
node1.dataset_init_buffer()
node1.dataset_set_buffer(network_name='test', network_key='00112233445566778899aabbccddeeff', panid=0xface, channel=11)
node1.dataset_commit_buffer('active')
node1.ifconfig_up()
node1.thread_start()
node1.wait(5)
assert node1.get_state() == "leader"
# Start the Commissioner role on node1
node1.commissioner_start()
node1.wait(3)
node1.commissioner_add_joiner("TEST123",eui64='*')
# Start node2
node2.ifconfig_up()
node2.set_router_selection_jitter(1)
# Start the Joiner role on node2 and wait for it to join the network
node2.joiner_start("TEST123")
node2.wait(10, expect_line="Join success")
# Wait for node 2 to become a Router
node2.thread_start()
node2.wait(5)
assert node2.get_state() == "router"