mirror of
https://github.com/espressif/openthread.git
synced 2026-09-13 20:50:05 +00:00
Thomas
f42af4e2ee
With Thread 1.4 the cli application not can also (dns) resolve IPv4 addresses. This commit adds the same support in otci * dns_resolve4 Implements support for vendor operations in otci get/set * vendor_name * vendor_model * vendor_sw_version Implements network diagnostic commands * get * reset * non_preferred_channels Various other (small changes)" * allow setting read timeout on serial connections * allow replacing read routine filter * expose latest thread versions in the public module api * expand the definition of dns_get_config * replaces mgmtget/mgmtset with the correct mgmtgetcommand and mgmtsetcommand * replaces addressmode with the correct addrmode * adds an `ignore_result` option to `execute_command` * adds a missing `diag` command * removes some unexisting getters
54 lines
1.4 KiB
Markdown
54 lines
1.4 KiB
Markdown
# OpenThread Control Interface
|
|
|
|
The OpenThread Control Interface (OTCI) is a library which provides uniform Python interfaces to connect and control various kinds of devices running OpenThread.
|
|
|
|
## Supported device types
|
|
|
|
- OpenThread CLI
|
|
- SOC device via Serial
|
|
- OpenThread NCP (limited support via [pyspinel](https://pypi.org/project/pyspinel/))
|
|
- SOC device via Serial
|
|
- [OpenThread Border Router](https://github.com/openthread/ot-br-posix)
|
|
- OTBR device via SSH
|
|
|
|
## Example
|
|
|
|
```python
|
|
import otci
|
|
|
|
# Connect to an OTBR device via SSH
|
|
node1 = otci.connect_otbr_ssh("192.168.1.101")
|
|
|
|
# Connect to an OpenThread CLI device via Serial
|
|
node2 = otci.connect_cli_serial("/dev/ttyACM0"))
|
|
|
|
# Start node1 and wait for it to become the Leader
|
|
node1.dataset_init_buffer()
|
|
node1.dataset_set_buffer(network_name='test', network_key='00112233445566778899aabbccddeeff', panid=0xface, channel=11)
|
|
node1.dataset_commit_buffer('active')
|
|
|
|
node1.ifconfig_up()
|
|
node1.thread_start()
|
|
node1.wait(5)
|
|
assert node1.get_state() == "leader"
|
|
|
|
# Start the Commissioner role on node1
|
|
node1.commissioner_start()
|
|
node1.wait(3)
|
|
|
|
node1.commissioner_add_joiner("TEST123",eui64='*')
|
|
|
|
# Start node2
|
|
node2.ifconfig_up()
|
|
node2.set_router_selection_jitter(1)
|
|
|
|
# Start the Joiner role on node2 and wait for it to join the network
|
|
node2.joiner_start("TEST123")
|
|
node2.wait(10, expect_line="Join success")
|
|
|
|
# Wait for node 2 to become a Router
|
|
node2.thread_start()
|
|
node2.wait(5)
|
|
assert node2.get_state() == "router"
|
|
```
|